AutoCAD 2013 :: Get Curve When Drawing Concentric Reducer?
Oct 21, 2013How do i get the curve when drawing a concentric reducer i tried lofting but still dont get the curve.
Spoiler (Highlight to read)
ADVERTISEMENT
AutoCAD LT :: Drawing A Open Reducer
May 5, 2013I have got a reducer with a size of 4" to 3" dia and a length of 5". I need to open and draw its dimensions. I need the dimensions as highlighted in the sketch.
View 3 Replies View RelatedAutoCad :: Automating Drawing Concentric Circles
Jun 15, 2011I have a large .DWG with approximately 400 circles representing wells on it. The end goal is to draw an additional circle around each of these with a larger radius (150). Basically what I'm looking for is a way to automate this such that:
For (object 1 to last object) {if (object is a circle) draw new circle around it
Illustrator :: Drawing Circles From Center And Concentric
May 5, 2013how to draw a circle with its center at the starting cursor location of the drag motion? It's given that the ellipse shape tool is chosen.Neither simultaneously depressing the shift or control key concurrent with the drag motion accomplishes this objective. any simple way to draw concentric circles each of which has a randomly chosen diameter and varying stroke width? The polar grid tool isn't relevant to this objective.
View 3 Replies View RelatedAutoCAD Inventor :: Create Hyperbola Curve Using Equation Curve (Autodesk 2013)
Feb 19, 2013I want to draw hyperbola curve whose equation is x^2/a^2 - y^2/b^2=1. May I use equation curve tool to make the above hyperbola.
I have also made a hyperbola curve of aforesaid equation through conventional method on mathematical ground in the past.
AutoCad 3D :: How To Draw Eccentric Reducer
Apr 17, 2010but i am unable to draw eccentric reducer using the enclosed sketch.
View 9 Replies View RelatedAutoCAD Inventor :: Development Of An Eccentric Reducer
Feb 29, 2012How to develop an Eccentric Reducer .
I want Big Id =2750 mm Small ID=1650 mm & Length of Eccentric Reducer =4400 mm Thk=20 mm
AutoCAD Inventor :: Fillet In Eccentric Reducer?
Sep 23, 2013What kind of fillet i need for relax the edges in a eccentric reducer pipes's fitting, i can use fillet of faces for the sircular edge smaller , but am in troubles with the bigger .
View 1 Replies View RelatedAutoCAD Civil 3D :: Part Builders - Rectangle Pipe Reducer
Jun 20, 2012If I was to build a rectangular pipe reducer in parts builder does it have to be built as a structure or could or be a pipe? I am having a hard time understanding how to use part builder. I am trying to work with all the tutorials I can find. I just wish I could find a step by step on how to make a reducer.
View 3 Replies View RelatedAutoCAD Civil 3D :: Drawing Two Centered Curve?
Aug 11, 2011How can i draw a two centered curve in civil 3d?
View 9 Replies View RelatedAutoCAD Inventor :: Dimensions On Exponential Curve In Drawing
Jun 27, 2012I am trying to figure out how to properly define the dimensions of an exponential curve in a drawing to make it easiest to have the piece machined.
I am starting to wonder if inventor refers to this type of curve as something else entirely, as well. Since an exponential curve is like the shape of an airplane wing and doesn't have a "consistent" angle.
AutoCad :: Make A Bunch Of Concentric Circles?
Jul 10, 2006I needed to make a bunch of concentric circles (something like 30 or 40), and I used offset command; I'm wondering if there's a way to 'array offset'? It's already done and wasn't that difficult, but I just have to know..
View 2 Replies View RelatedAutoCAD Inventor :: Making 2 Mesh Concentric
Jan 8, 2013I am working with 2 mesh's they are the same shape but different sizes. I want to subtract one out of the other but only after they are both "concentric". The objects are not symmetric so I cannot officially use the term concentric but I do not know any other term.
My problem is that I cannot get them concentric.
Things I tried:
They will definitely both have the same center of mass so I tried doing things with that but to no avail.
I also tried to set 3 constraints (distance between identical surfaces on each mesh) equal to some value x but it did not let me. If it did, I believe the smaller object would have no place to go but right in the center of the bigger one.
I have attached an assembly with both of the objects.
AutoCAD 2013 :: Curve-fit Polyline Grips
Oct 29, 2012Any unpublished system or drawing variable that allows you to toggle to the classic grips on a curve-fit polyline? I have searched online and checked with our reseller but we have been unable to find a way to switch to the historic grips that are available on a curve-fit polyline.
View 3 Replies View RelatedAutoCAD 2013 :: Aligning Blocks To A Curve
Aug 21, 2013Is it possible to create a block that conforms to a curve in AutoCAD 2013?
In this case I want to have 3 lines that will intersect an existing line at 1 meter intervals - which is simple for straight lines, but when the existing line is curved my current block setup just isn't cutting the mustard.
The only thing I'm trying to achieve is to have a block that will place these lines at 1metre gaps (with the distance measured along the line I'm placing it on, and not the shortest distance).
AutoCAD Inventor :: Getting Model Feature From Selected Drawing Curve?
Sep 11, 2012Im trying to create some code for another user which takes the pre-selected drawing curve and retrieves the feature information from the model. More specifically, I want to pre-select the drawing curve of a hole, and then run the rule. The rule will take this selected drawing curve and get its model. Then from here I'm expecting I'll be able to use the Hole Feature classes in the API to retrieve the wanted information.
I've tried using SelectSet.Item(1by tut cannot seem to be able to set it as a drawing curve (or anything for that matter).
AutoCAD Inventor :: Bolted Connection With Option Concentric
Aug 23, 2010I've been using inventor for past 3 yrs. I just love it.
1. BOLTED CONNECTION: whenever i perform a bolted connection with option "CONCENTRIC", though it creates the holes in all the locations but places fasteners only in the first hole(refer attached picture). I'll have to copy and paste it individually for all other holes then, which is quite a hassle. It works fine with all other options i.e BY HOLES, POINTS etc.
2. While creating a new part, I usually makes the referance planes in the center of the part which makes it easier to assemble by planes in a large assembly. For this purpose, i have to project the planes and then get my sketch symetric to the planes during every part creation. As I've worked in other softwares too, where in sketch it automatically alows to use the referance planes for sketching, so we don't have to project it in order to use it.
AutoCAD 2013 :: Why Lines Sometimes Get Angular / When Draw Circle / Curve
May 3, 2013Why the lines sometimes get angular when I draw a circle/curve? How can I make them round?
View 8 Replies View RelatedPhotoshop :: Curve Drawing
Jun 16, 2005i tried drawing a smooth curve and i completely forgot how to do it. i used the pen tool to draw a line and it keeps filling it with color. if anyone can guide me on how to drave a simple curved line with a single color.
View 2 Replies View Related3ds Max :: Crash / Drawing CV Curve On Surface
Oct 9, 2013Finally just got updated to 2014, and I cannot draw a CV curve on a surface. It immediately crashes.
I tried using Direct3D and OpenGL. No dice.
AutoCAD Civil 3D :: Opening Drawing In 2013 And Drawing View Changes?
Nov 28, 2012Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies View RelatedPhotoshop :: Concentric Circles?
Jun 5, 2008making concentic circles. how to make these.
View 2 Replies View RelatedPhotoshop :: Concentric Circles
Nov 8, 2002how to make concentric circles for the purposes of circular scan lines. It involved making a series of horizontal dots in a single line and rotating them through 360degs leaving the concentric circles in place.
View 5 Replies View RelatedAutoCAD 2013 :: Drawing Order - Send To Back / Not Working Anymore In 2013
Apr 17, 2013I have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?
AutoCAD 2013 :: Setting Up One Drawing In Multiple Screens With One Session Of 2013
Nov 21, 2013I recently added 2 monitors to my set up to bring my total to 3. I am trying to figure out the best way to work on one drawing, with 2 differant veiws on each of the 2 main screens.
I would like my main screen to have the plan view and the second monitor to have an isometric veiw (or whatever I need at the time) of the same drawing. Is there a way to have the same drawing opened up in another window, in one session of Autocad 2013. One on the main screen and one on the secondary.
Photoshop :: Freehand Drawing With Curve Support
Jan 2, 2009Is there a way within PS to support freehand drawings. What I mean is a support in that way which makes hand drawed curves more smooth. You know what I mean. I think Marcomedias Flash does such things. Is this also in PS availible?
View 2 Replies View RelatedAutoCAD 2013 :: Prompt / Save In 2013 Drawing Format?
Nov 14, 2012As many of us seam to do the option to save by default to an older version of AutoCAD or universal DXF format is selected, my problem is however when you save an existing drawing a prompt appears asking if 'Drawing*.dxf last saved in AutoCAD 2004 format. Save in AutoCAD 2013 Drawing format?' this has annoyed me for years!
I have set it as default DXF 2014 for a good reason I don’t want a prompt asking me if I want to then save it as 2013 or I would have set it like that on my default setting, gets on your nerves when you are doing 100's of files.
Win7 64 Pro - Asus P8P67 PRO - i5-2500k CPU O/C@4.5Ghz- OCZ Vertex 2 SSD - 8GB Ram - GTX550 Ti - SpaceExplorer.
AutoCAD 2013 :: Drawing Tabs App For 2013 (MDITabs)
Jul 24, 2012i download it successfully BUT nothing happened as usual on my CAD screen - tabs doesn't appear !
- i restart my AutoCAD many times.
- nothing appear in plug-in tab.
AutoCAD Civil 3D :: Error 607 / Inlet A9 Gutter Capture Curve Is Not A Valid Curve
Dec 31, 2013I have ran an analysis and SSA gave me Error 607 on the report. It says "Inlet A9 gutter capture curve is not a valid curve."
A couple things I did different from the video lectures...
I selected user define for the Tc to figure out Q. i computed those manually.
For the Inlets I have selected Maximum Capture Cutoff.
There are some inlets in this model I created that do not capture 100% of the flow so i created conveyance links to account for the bypass flow.Not sure why is not recognizing the Curve?
Photoshop :: Brush Display Of Two Concentric Circles In CS6
Jun 13, 2012In watching videos about Photoshop CS6 I notice that the brush (or other cursor) often appears as two concentric circles: the outer circle gives some idea of the extent of the brush effect. How do I activate this double circle brush display in Photoshop CS6. I seem only to see a single circle for the brush display. I am using the "cloud" version with Windows 7.
View 8 Replies View RelatedPhotoshop :: Smoothing Lines- And Making Concentric Circles
Mar 24, 2004How do you smooth lines? Like if I trace something and the lines are just a touch jagged, how do I get them to look perfect? I'm using PS7.
Also, how could I make concentric circles? Or even just a hollow circle? I can use the shape tool to make a circle, but that fills it - is there a way to make it with just a 2 or 3 pixel outline and hollow in the middle?