i'am trying to create a block that has 3 components that can change
1- crane model or base
2- crane boom has different lengths and needs to rotate at pivot point
3- crane jib has different length and offsets from the crane boom
How to do this in one block or do you need to have 3 seperate blocks and just piece together.
I have an X centered as my insertion point.
When I stretch the dynamic block for a larger area the X stretches but into the next single box but not centered within the double space.
how to get the X to be centered in the box when it is enlarged to a double or triple size?
We have blocks of process valves. The valve body in layer "valve" and the ports in layer "pipe" The Lower port of the valve is for "fluid A", the upper port for "fluid B".
Now we want to dynamically choose the layers for both the lower port and (a different layer for) the upper port. Dynamically because the same valve can be used twice with completely different fluids / layers. Is there an attribute or dynamic parameter to do this?
I am in the process of fixing one of our dynamic blocks. It's a fairly simple fix where there was a typo in one of the names of our items in the lookup that needed to be fixed.
I changed the name of the item in the lookup table. I went and did the test block and it seemed to work fine, but when I bring the block into a drawing, it reverts back to the old lookup as if I did nothing at all.
I made sure that the path was correct and I even just dragged and dropped straight from Windows Explorer to no avail.Does AutoCAD keep referring to the old block? Did I forget to change something else?
my problem is whenever i make a new block a stretch point appears even if its not a dynamic block . also its not a stretch point, because when i click on it, it just move the block , and it always appear on the coordinates 0,0 it cause me a problem when I insert the block , autocad use this point as a base point , and its very far from the real block .
View 1 Replies View RelatedIs it possible to create 3D dynamic block and export dimension data ? in detail I would like to create a pipe block, use it in a dwg with different length and export data in order to know sum of all blocks with different length.
As alternative, In case 3d dynamic block is not feasible, is it possible to export data to calculate dimension of 3D object?
I want to create a dynamic block that as I select my pick point to move it over it stretches the box, however at the same time it arays 2 other lines at the same time. The trick is I need the 2 lines that array to renceter them self within the overall box thats being strtched. To put this in exact teerms I'm looking to create a dynamic block of a reinforced concrete slab that you can stretch to the length you want and at teh same time the reinforcing sysmbeol (----- X-----) will array itself and recenter. Is this possible to do?
View 9 Replies View RelatedI have created a drawing border block for my users to insert into their drawings. Within the block there are dynamic blocks which have visibilty states. However when you insert the border block with the dynamic ones you can't do anything with them? Is there anyway of making the border 'flexible' or something so that it maintains the fact that it is a block with all the attributes but you can use the embedded dynamic ones. Other than the obvious edit block in place or block editor?
View 2 Replies View Related is there a way to make a dynamic block that adapt when using with constrait...i want the block, wich will be a panel with different visibility, to adapt between 2 geometry using coincidence or colinar constraints
so when i change the parameter of the distance between the 2 geometry , the block length will ajust accordingly i'm not new to the dynamic block but to using parameters with it, never done that.
what I need to do to fix the elevation tag block below? I want the text to rotate and be readable as I rotate the block. Right now the text rotates but it's not readable when it's on the left hand side.
View 3 Replies View RelatedI have a drawing with multiple instances of a dynamic block. I have a second drawing with said block modified.
I want the first drawing's block to be updated to the modified block without reinserting each block separately.
I don't have the block as a separate file to "insert", only available to copy. With it being dynamic, I don't trust using the block editor and just copy/paste from the modified into the original.
Is there a way to redefine the block?
Is there a trick in using a dynamic block in a table cell? When a dynamic block is inserted into a cell, any visibility can be viewed (Properties Manager) in that cell if the visibility state has a block in it. What happens if the visibility state does not have a block. That is, if the view has exploded block so one can use parts in actions etc? Can I view ANY state in a cell regardless if it has a block or not? Or must the visibility states have blocks to be able to use it in the table cell?
View 2 Replies View RelatedIs there a way to use more then one visibility parameter in a dynamic block in autocad 2013
View 1 Replies View RelatedFor my AutoCAD class we are supposed to make a dynamic block of a basic theater flat which we can then stretch into different sizes. I was able to do the vertical stretch no problem, but when it comes to the horizontal stretch, the lines do more of a move action then stretching. I have redone it several times but it still won't stretch properly.
View 1 Replies View RelatedI have made up an extensive dynamic block library over the year, however in the latest version when I have tried to modify blocks with visibility states you can not cycle through the different states it will just revert back to the first one.
View 3 Replies View RelatedI'm trying to create a Dynamic Block of an 3/4" x 3/4" aluminium angle with holes:
Depending on the length the number of holes will vary.
The distance between each holes need to be somewhere between 8" and a maximum of 12".
The holes must be centered and start from 1 1/2" up to 2" from each ends.
Each distance must be not more precise then 1/16" (no rounded off dimensions)
I'd like to simply drag the handle of the linear parameters (No lookup or visibility for 2 hole, 3 holes, 4 holes etc.)
i just upgraded to 2013 and my dynamc block functions have dissappeared. the ones that flip doors etc.
View 1 Replies View RelatedI have been building a bush cross section.I am building it as a dynamic block as I need copies in many different sizes.
Due to the cross section I am using hatches to indicate different materials (only 2)
When I change some distances linked to actions the hatch remains inside its boundary and conforms to the new shape, most of the grips work perfectly whereas one, the top left grip, misbehaves time after time and breaks the hatch associativity.
I should mention that I had it working perfectly earlier, but was asked to add a fillet onto my drawing and after putting this in and tweaking everything I have no longer been able to reach perfection.
I sent the following message to autodesk:
Issue: Dynamic Block causes crash
Preface: A dynamic block c/w a "flip" parameter and a multiline attribute will crash when the block and attribute is flipped, and the attribute justificatiob modified.
Explanation: When the dynamic block is flipped, the multiline attribute is also flipped causing its justification to switch from "top left" to "top right". When the attribute is edited in the in-place attribute editor to switch the justification back to "top left", it causes AutoCAD to crash.
Workaround: Instead of using the in-place attribute editor (i.e. same as MText editor), the attribute justification is changed by modifying the attribute properties in the "Enhanced Attribute Editor" dialog box - on the "Text Options" tab
I am currently using Autocad 2014 and I am attempting to insert a dynamic block from a tool palette. I would like to click on a dynamic block in the tool palette and have it prompt for the (uniform) scale. It seems simple enough but either all the dynamic properties are lost or it is inserted at 1"x1" (the scale of my original block). How to get this to work?
View 3 Replies View Relatedthe layer order will not function as soon as the block is made dynamic. I have been creating my blocks the harder way and still have more to do, so what to do.
The last time I asked the Autodesk technician, I was told it is a program (Autodesk) issue which I call a bug. I have tried the draw order and the Textofront still, no better result.
I have searched high and low and still could not find a tutorial to really explain how to create a drawing title with attributes (Detail Number, Sheet Number, Detail Title, Detail Scale). All I find are on creating dynamic block, which I could achieve, but I need one for a block that has (or will have) attributes.
I was able to find a tutorial on attributed door numbers, but it does not work for drawing titles that has attributes. GOAL: I would like to have all my seven drawing titles in one file and to be able to stretch the leg of any selected title to a desired length.
I created a dynamic block to represent a room in a floor plan. It displays the dimensions and area of the room and can be stretched. But it's defeating the whole point of being dynamic. The area won't update unless I do a regen.
I've seen comments blaming MTEXT for the problem, so I tried putting the area field in a line of TEXT or DTEXT. It still didn't update unless I did a regen.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I'm trying to create a dynamic block that uses a parameter and an attribute definition to determine the diameter of a circle in that block. I plan to export GIS points with diameter in the attribute table into a CAD file with the block definition. I'm having trouble figuring out how to set up the parameters to read to attribute definition and adjust the circle diameter. Using AutoCAD 2013
View 5 Replies View RelatedI found an interesting dynamic block. It has a clipping boundary but you can drag the 'leg' out of the boundary. How can I make such block?
See attached dwg file.
I am tying to create a Dynamic Block of a steel angle of multiple sizes and thickness. I used Dynamic Blocks before and live the idea of changing sizes on the fly with out having to delete and recreate an object.. I got as far as creating an angle of different sizes, i.e.. 4x4, 5x5, etc. and different thickness but can't get the thickness to work with the radius of the angle.
View 2 Replies View Related1. What is the easiest way to find points that are not constrained? I get a notice that the block is not fully constrained and its a nightmare going through all the lines trying to find where I need to apply a constarinet.( I can't wait to get off ACAD and back to Inventor.)
2. When I try to save a dynamic block using the Save Block icon under Open/Save, if the dynamic block is not fully constrained, and I click save, when I reopen the block to edit all of my constraints are gone, this has happened twice. Now I just exit by Xing out and saving changes.
I've spent a day and a half coming up with a way to make this dynamic damper block work. Now, I need to fig out how to get every other blade to rotate 90°. I have attached a file with my block and an example of what I need to make it do. I’m running AUTOCAD 2009 LT if you need to know.
View 2 Replies View RelatedSo I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies View Related