AutoCAD 2010 :: Replacement For X-sketch
Nov 14, 2012
I used a program back w/autocad 2002 called X-Sketch which allowed me to take hardline autocad drawings and alter them so that drawing had a "wavier", more hand drawn line quality to it. Essentially you could adjust the program to distort the lines on a drawing to whatever extent you wanted.
I believe X-Sketch went out of business a number of years ago, at least I can't find it.. Any replacement add on program to autocad program that can replicate this?
View 2 Replies
ADVERTISEMENT
Dec 14, 2012
want to change sketch 2013 into the sketch of 2010
View 1 Replies
View Related
Jun 14, 2012
when I open a drawing that's missing an shx file I get a dialog box (see attached). I put a check mark in the "always perform current choice" item and select the "Specify a replacement for each shx file". I assume this replaces the missing shx file with the default shx file. But if I send the drawing to someone else they get the same message. Did the shx file not get replaced or do I need to do something further?
View 4 Replies
View Related
May 21, 2013
I have drawn a 2D sketch (of a wind turbine) and I found it easier to just rotate the drawings of the blades out of the plane of the drawing to get something that looks like an isometric view. So now some parts of my drawing are in plane, and other parts are turned out of plane by like 35 degrees, so looking at it from the top it looks like an isometric view of the turbine.
However, now I have a task to have the same drawing but with gradient filling in the turbine itself as well as the air and water in the background. The easiest way to do this would be to somehow get a 2D projection drawing of what I see when I look at the plane from the top. (see attached picture)
So what I need is to get what is called "Top View" in the picture with all lines being in-plane from the out-of-plane drawing shown on the right.
View 6 Replies
View Related
Sep 21, 2011
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies
View Related
Sep 20, 2012
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
View 4 Replies
View Related
Dec 3, 2013
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
View 2 Replies
View Related
Aug 1, 2011
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
View 9 Replies
View Related
May 30, 2013
When I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
View 8 Replies
View Related
Aug 22, 2012
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies
View Related
Mar 4, 2012
what is the difference between a sketch and a planar sketch?
View 2 Replies
View Related
Aug 16, 2012
I'm having trouble with constaints, I'd like to constrain my sketch to a point in another sketch on a different plane. Is this posible in Inventor? If so how? If Inventor works differently how would you get a points in one sketch to be linked to points another?
View 2 Replies
View Related
May 28, 2013
How to trick Inventor into using a different GD&T font than AIGDT___.TTF? I need to convert a bunch of drawings into an older cad program (using dxf12...long story) and the symbols don't translate. Thinking another font (such as gdt_____.ttf or gdt_IV25.ttf) might work. There's probably a registry hack somewhere, just don't know where.
View 1 Replies
View Related
Apr 8, 2013
Any way to replace views with different assemblies in the .IDW files? I really don't want to blow away all of my views and replace them manually!
View 2 Replies
View Related
Sep 20, 2013
So we receive a drawing from a partner and open it, and get this message, which is expected since FONTALT set to nothing
No problem, we click "Specify a replacement...", then get this dialog.
Where a replacement font is selected (it doesn't matter if we choose a TTF or SHX), and then the drawing continues to open. At this point we presume that any text with the style named "Style-WORKING" is going to be displayed using "Times New Roman".
But alas, open the STYLE dialog and.....surprise:
The font replacement never occurred. At this point if we choose a font and press Apply then REGEN the drawing, the text with the style "style-WORKING" shows up.
This sequence of events (except for the last step) occurred for a user and some important text in the drawing was overlooked because if was not being displayed. Even setting QTEXTMODE = 1 does not show the missing text rectangles.
So what is the point in telling the user that a font cannot be found and prompting him for a replacement font if it isn't going to be applied? (Yes, I know the sender should have used eTransmit, etc., but that isn't the point here)
View 4 Replies
View Related
Nov 17, 2013
I need to find a way to find a good replacement for "SAVE" command to use it within Reactor. I want to save A COPY of my current ("active") DWG document to another place *without making it current* (just like command "SAVE" does and did it always). I know I could use (vla-saveAs ...) to save it first to another Folder and then use (vla-save ...) to save it back to its current Folder, but there must be a way to do it simply and fast.
View 9 Replies
View Related
Aug 31, 2006
I work in Sketch-Up a lot creating urban streetscapes and such as I am the graphics person at a community planning consulting firm. Sketch-Up is great for quickly drawing and creating 3D models of screens; however, it is not good for producing a great looking final image to show to a client. What I want to do is export a 2D graphic from Sketch-Up and make it look like it was hand drawn. I am semi-proficient in Photoshop, meaning I can follow a tutorial and be able to tweak and apply what I learned to fit my needs but I can't seem to find something that gives me what exactly what I'm looking for. I've uploaded an image that represents the style I am looking for. This one was done by hand on tracing paper. I can't draw by hand to save my life so I want to create the model in Sketch-Up, export the screen as a JPEG, load into Photoshop and process to make it look like it was done by hand.
View 3 Replies
View Related
Aug 27, 2003
I have a PS (7.0) layer and want to replace speicfic RGB values with a nother RGB value. For example replace RGB (220,220,220) with RGB (125,135,145). I am trying to create an action to automate this process for multiple PSD.files (approx 50) that need the same RGB value conversion. I tried using the "replace color" but this defined an area to modify not a specific RGB value.
View 4 Replies
View Related
Jun 28, 2013
I've seen some stunning "face replacements". I just can't get the textures of the two source photo's to match perfectly. For instance a coarse photo from a newspaper and a high res photo. I use PS CS6.
View 2 Replies
View Related
Apr 15, 2009
i want to make some hdr photos but can't afford photomatix. is there any freeware or replacement to get the same end result?
View 3 Replies
View Related
Aug 11, 2007
I been trying to change the color on this car to black. I changed the color on the car by trial and error, but not to black.
View 2 Replies
View Related
Sep 25, 2006
I have an image in which I am trying to replace the black coloring in a flag to pink, but the replacement isn't going through. The flag only becomes a greyish color.
To replace the color I used Image--->Adjustments--->Replace Color and then selected the black with the eyedropper, and change the color on the bottom to the pink.
View 3 Replies
View Related
Dec 9, 2005
I need to change a solid black shape to a brown color, but the color replacement can't change b&w to actual colors right?
Well I know I could select it and just fill it, but it gets too pixelated; the edges on the shape are a little feathered.
When I do the color replacement tool the value changes nicley, but why can't the color change also...is there any method that can change this black shape to brown without having to cleanup the edges?
View 6 Replies
View Related
Aug 2, 2008
I cannot find my copy of CS2 to install on new machine. It was actually an upgrade from CS that I had downloaded...somewhere...I called Adobe and was told they cannot supply a replacementI would need to upgrade to CS3 (which I'm not interested in at the moment). I find this hard to believe...have I been informed correctly? Any ideas how to obtain a replacement (not interested in cracks, btw)?
OR can someone tell me the exact filename of the original download so I can refine my search on my old PC?
View 2 Replies
View Related
Nov 21, 2008
I have a few photos of some models dressing in solid color outfits. I would like to add patterns in place of the solid colors. Is there a quick method or auto action, that allows you to do this?
If so, what version of Photoshop?
View 7 Replies
View Related
Jan 26, 2012
Create a realistic water animation in 3ds max 2012, is there is a replacement of water reactor.
View 1 Replies
View Related
Sep 5, 2013
Using the Color Replacement Tool in CS6:
what the sampling continuous option does?
View 1 Replies
View Related
Oct 20, 2012
I miss picture package in CS6, from reading it is no longer supported in CS6. Any replacement for this on a mac?
View 1 Replies
View Related
Jun 3, 2012
I am trying to change a silver to a deep reddish brown but when I try the colour is off..Here is what I have tried.
I have used the colour replacement tool as well as the Hue tool but like I said it produces a variation of the original colour and the new colour.I have also played around with desaturation but with the same colour I end up with a pink. This was just a shot in the dark.
View 9 Replies
View Related
Aug 28, 2013
My issue is I have a panel that is a gradient background and I need to change the color from yellow to blue. I have successfully changed the solid color to 0072b9 in the top left using the Color Replacement tool, however cannot work out how to change the rest of the image.
The "swoosh" in the middle of the image seems to be a different layer perhaps? Every time I change it, it goes purple and changes the rest of the image. I wanted to fade out 0072b9. I tried to replace the more faded part towards the middle / bottom right to 5ACCFF which is getting lighter but it just dirties up.
View 9 Replies
View Related
Nov 10, 2013
My lod laptop died. Reinstalling Photoshop 6 (! ) on my replacement, I was disallowed from registering, receiving a message that the software had already been registered.
View 2 Replies
View Related
