After Effects :: DVCPro HD Render Wrong After Update To 12.1?
Nov 12, 2013
rendering out of After Effects CC 12.1 as DVCpro HD 1080i60 is showing up as the wrong aspect ratio, it renders out as 1888 x1062. Before the update to After Effects CC 12.1 it was working/rendering completely fine as 1280 x1080.
Take a DVCPRO HD 1080 comp, render it and it renders as 1888 x1062, not 1280 x1080 like it did before. And the strange thing, if I re-import that rendered clip into AE, it will see it as 1280 x1080 (1.50), but if I open that clip up in Quicktime, it will see it only as 1888 x1062 ?? Again, before the update to 12.1 even quicktime would see it correctly as 1280 x1080. Something in the header info in quicktime is now wrong and it won't read it correctly. We have a piece of gear that i need to send files to as dvcpro hd 1280 x1080 and it won't even take them anymore because the quicktime header or something is wacky. (yes the gear i'm sending to is weird, and strange we send it that format, don't ask, I know)
I've tired rendering/exporting out of media encoder and premiere since the update and it's the same thing. Even rendering from AE and forcing it to resize in the render queue won't work.... it still shows up as 1888 x1062. Errr So I'm not sure where to start looking to fix the problem? Is it happening because of the Adobe update to 12.1, is it a quicktime issue or is it my Calibrated software for DVCpro on windows..... I don't know? I just know it was all working great before this latest update and now it's not.
I'm using windows 7 profesional
Adobe creative cloud
And software called "Calibrated" DVCPro HD Decode software so we can use DVCPro clips on windows.
HD Z820
AJA Kona Card
nvidia k5000
I just rendered a video last week with no issues. I updated After Effects CC a few days ago and now my PC shuts off about half way through a render. It is only a ten second clip with very little effects in it.
I have tried different video formats and codecs, I also tried to render the project in Media Encoder and Premiere Pro...the same result. My system is fine and I was rendering videos no problem until this update. Can we roll back updates?
Yesterday Ae was working perfectly. Today, Ae will not render compositions in the render queue or in AME? If I try to render from Ae,I get this error message:
and I can fin nothing about this error anywhere on line.
I select a layer to work on it, move the layer, click on the canvas, & PSD activates a different, wrong layer. This happened on a new project and an older one that used to work. It seems to only affect layers that have been re-arranged.
I just updated CS6 to 13.0.2 and noticed an issue with the eye dropper. With the eye dropper tool selected, hovering over the document puts the wrong values into the RGB section of the Info panel. It does pick the correct colors when you click the mouse, though.
By "the wrong values", I mean that the eye dropper seems to sample half a pixel to the left of the pixel you're hovering over. I'm not using a Retina display, but it wouldn't surprise me if this is a result of the changes for Retina. In any case, it's not correct.
Prior to that, the linetype as seen in the attached screen short displayed the same for both the alignment style (green) and the polyline (white). After 2.1, they display at different scales. Why? There now seems to be a problem with linetype scaling in the style definitions.
The same linetype is used in the alignment style as is assigned to the polyline. The scale is the same for both (in the alignment style definition and as assigned to the polyline).
The only thing that changed is that on Friday morning, I installed the update 2.1 and this is what things looked like in existing model files when I opened them that displayed correctly when I went home on Thursday. Open this file on my computer and it displays according to the attached screen shot. Open the exact same file on another team member's computer and they display at the same scale.
I'm creating a advertising video using a iPad tablet in the video. This iPad tablet rotates throughout the video with messages that popup on the ipad screen in different sections. As of right now I have 5 compositions within this iPad video. I created a 6th composition and when I overlay it on top of my 5th composition it would show up in the wrong spot. It either A: Only showed my 6th composition and not my 5th or B. Never shows my 6th composition.
I have some RED footage shot 2.40:1. I brought it into After Effects, created a composition from selection and exported it. When I bring the exported quicktime back into After Effects it is the correct frame size, 2048x854. But when I view it in Quicktime Player or Avid the file opens 1920x1080 and looks stretch. When I view the quicktime properties in Avid, the source footage's Image Aspect Ratio is 2.40:1, but the After Effects Export says the Image Aspect Ratio is 16:9.
I want to export from After Effects at 2.40:1, why isn't it maintaining this ratio?
There seems not to be that option. I have a AE file that is 4480x192 and needs to stay this size! I have tried many converters, but they seem to diminish the quality and change the size. The program this file will be put into ONLY accepts .avi.
I have been working on an animation project in AE and every time I click the Add to Render Queue option it does nothing. I have tried to export it as well, to see if it would render or export and it doesn't do anything. The only thing I can do is Save Frame As. I have been working on an animation previously and was able to Add to Render Queue to render out my animation, it has only been since I added some Automated UI Scripts for pre-animated kinetic typography and for line creation that it has not allowed me to render out anything. I have checked that the scripts are in the correct Script UI folder and they are and I have tried a few other things and nothing is working, .the only thing I can think it may be is my RAM is full or there's an issue with my render settings.
is there any chance to render with more than two machines in CS6? Trying to install a small (non commerial) renderfarm (3 machines) I got the message that´s not possible to render with only one licence!
I'm trying to render quicktime files and recieve this - After Effects error: Rendering error while wriring to file . Unable to open file. (-1610153459)
My rig i7 CPU 93- @ 2.800 2 x GeForce GTX 460 16 GB Ram
These are files which I've previously rendered without a hitch, this started yesterday. I've deleted folder in appdata with no success.
I can't get CS 6 to render on the farm after I installed AE CC. I did put the text file in place as described here, but this did not work:
o enable non-royalty bearing mode, place a blank file named ae_render_only_node.txt into one of the following locations, depending on the user account type:��
#Install After Effects on the render-only machine.
I mostly work on my songs, they are 5 mins long the most, after adding all effect , transitions and etc, i send it to "Render Queue" to make a movie , everytime I send it to render queue to make a movie or render it, since my system is not all that , it takes about 20 hours to finish and I could watch my music video, but I was wondering if there is a short way to render my project or song, so I can b able to see the full song
The quality has to be decent, otherwise I won't be able to tell if the color correction I mde is good enough.If the final rendering takes that long, I don't mind b/c I am gonna be done with my song .Which will be a 720x480 quicktime HD.
this has been only happening since updating this morning from 13.0.1 - 13.0.2...I have a problem where if I create a new curve layer and then press the preview button on/off it fails to re render the preview and nothing else happens until I OK it. I also notice that it creates history entries on the history panel like I'm making adjustments? Weird!
There's been a few other noticeable things too. The liquify window now doesn't draw as nice and smoothly as it did with 13.0.1. The cursor jitters a lot and control isn't as smooth.
my problem; when I use the filter; 'render'- lighting effects - it will no longer save any styles-(neither mine nor the pre-sets-they are gone).
Have tried reinstalling to different directory, etc but no avail. I can add lights and all during current session, but cannot save when i try, an error message just pops up and says"
Just upgraded to CS2 and went to Lighting Effects assuming to find the big drop down menu of styles, but the box is blank and also when I try to save a style I have made, it comes up with an error.
I have created a short 4 second comp and it all plays back fine until I actually try to render it. I've tried rendering the layer on it's own in a seperate comp and it disappears then as well and just becomes a white screen, but the original one when put into a comp works fine. I've spent hours editing it and putting it in place so i really don't want to start again.
I have a Comp, which admittidely is a render nightmare, with 64 instances of a the same video each 1 frame ahead of the next. So it's very RAM hungry and something of a balancing act between the number of CPUs and how much RAM each is allowed (but generally allowing 3GB per process and 1 less CPU than suggested)
The thing that is killing me though is the RAM Preview is going almost 3x faster than a normal render. Even when the normal render destination is an SSD and compression is None. otherwise exact same settings i.e. 100%, best quality.
The really interesting part is that when doing a MP RAM preview the CPU usage (as viewed in activity monitor) is a solid wall of green but when I do a standard MP render the CPU useage is fluctuating wildly. I've tried various dififerent MP options (all maintaining a safe RAM overhead for the sysytem) with very little difference in performance.
MacPRO 2x 2.26 QuadCore, OSX10.8.3, 32GB RAM, Proavio RAID for source, internal SSD for destination.
I have created a moving background and I am rendering it in PHOTO JPEG format but when I convert it to .GIF to post it on my website, it takes away all the high quality. It is a moving background, what is the best format to render it in to post it as the website's background?
I don't know what the best practices are for rendering, but I've got settings I prefer to use, and I want to set them as a default in AE, but can't seem to find that option
First, they deprecated h.264. it's really the only valid option for rendering tight compression to be viable size for uploading. but i enabled the feature to show old formats.What I need to do is set it so it automatically defaults to my settings. it's a real pain to have to manually change that every time I render.
Also, along these lines I have a related question. Well, related sort-of.
I use Adobe Media Encoder when i can, i realize this is one reason they deprecated h.264 fronm AE. BUt what I don't get, is why I can't render anything that's GPU heavy in ME? for instance, if I use Element 3d it will utilize the cuda cores heavily in my video card. But I can't render those in ME. when I try to I get many many many many back to back errors and it finally jsut fails. I have a supported video card, though not a 'top dog' it's a GeForce GTX 770 which is plenty to tackle the work.
If I have a render in progress and I alt tab or to premiere or open premiere/media encoder, the render in after effects wit hthe "happy ring of success" noise. but the file is incoplete and the render has stopped part way done.
I've never used a Photoshop psd image in AE CS6, but yesterday I did, thinking I could tweak more easily...it's a flat (non3D) one-layer image with alpha. I dragged it into the project. The layer has some intense rotation expressions if that matters. I can work on it fine, it plays using RAM preview and I can save a portion of it as a RAM Preview Save, which is also fine. But when I render to a video file, the object disappears complete....I just get a black screen.
Whenever I Render out a clip, the resultant file, when played back in quicktime is extremely bright.
I pretty much work in a standard comp for all my projects:
16bpc HDTV (Rec.709) 16-235 Linearize working space
I have some projects that i previously rendered, and what you see in the after effects project window, is basically what you get on render - untill now that is. When I render the project, i usually use: Render settings - Best settings
Output module Quicktime with H264 codec
I now want to render out the best possible lossless versions for more work - I am doing this so I can interpret interlaced footage into progressinve footage for my workflow. This is something found, to import the footage at 50FPS into a double frame rate comp. I then get discreet individual frames from the camera I am using. - But I say this just to explain why I want the best output for this part of the project. ( I have reset the preferences via CMD+Option+Shift on startup of AE) -
it started about a week or so ago but when i tried using the lighting effects filter rather than showing a shadowy gradient effect like it usually does it is either pue blakc or just shwos an unnafected picture and when i play with the lighting rig or change slider settigns like texture for example it flickers back and forth like it's broken . but it works perfeclty in CS5 without a hitch.
i tried searching to see if others had a similar problem but all i got was that CS6 either didnt coem with it installed or the app doesnt display correclty. i dont know what to do i dont want to keep goign to an older photoshop just to use it's basic features.
PHOTOSHOP CS5.1 IN iMAC OS10.6 . I cannot use the filter Render - Light effects because it does not appear in the Render tag. On the other hand clicking the mouse right I can go to GET INFORMATION, but in the GENERAL SECTION , the option start with 32 bit DOES NOT APPEAR.
I owned this 5.1 version since some 18 months ago, and I am quite sure I succeeded in using the light effects in the past: What is happened and what can I do to fix the problem.
