I'm gonna create a folding animation (two planes folding over each other or a single plane fold over itself). Problem is I have to do it with bones and if I use two planes, when they are folded they will have a little gap in pivot line and if I use a single plane then I don't know how to assign a polygon (sub-object) to bone.
Windows 7 Ultimate x64
3Ds Studio Max 2012 x64 - Student Version
As I wrote in "Applying inverse kinematics to a folding rule" I succeeded with the first step.
Now I would like to make it behave like a whip. How to accomplish a whipping animation?
I did some motion capture of a person whipping an imaginary whip, so basically the folding rule just has to follow the hand and behave the way a whip would within the folding rule's constraints. How could I do that?
I want to create a folding rule and animate it. So I modelled it and applied IK to it. The problem is that the hinges are all over the place when pulling apart and collapsing it. Find the max file attached. fr.zip
View 4 Replies View Relatedif I have a rig and an object which is skinned to it, what is the best way to enlarge a bone so that certain vertices on my mesh will look inflated or deflated?
I tried to some tricks with the Xform modifier: wiring it's Gizmo controller to a slider UI control so that I could increase and decrease its size without actually scaling it, but this doesn't have any affect on the mesh. I then tried creating morph targets for the bones so that I could again increase and decrease their size without scaling them, but it didn't affect the mesh either.
It seems that the only way to get the mesh to localy increase or decrease in size is to scale parts of your rig, but that's something I always try to avoid.
3ds Max 2013 64-bit Student Version
nVidia GeForce GTX 560
Windows 7 64-bit
Intel i7
I'm just starting out with animating for a project. I'm trying to animate a weapon, but the bones are not showing, I've tried pretty much everything. The bone helpers are showing, but not the bones themselves:
View 3 Replies View RelatedI have a purchased model with a "hose type" rigg, and I can't figure out how to replicate it.
There is a hose with a bone structure that has four point helpers one on the face mask, one at the top, one at the bottom and one in the middle. If I move the one in the middle it moves all the bones without stretching them...
In 3ds Max i made CAT Bones for my model. However how do i attach these bones to my model? Because when in Motion Builder my model doesn't move with the bones. I also tried a biped it also didnt move.
View 1 Replies View RelatedI am working with a rig that has arms and legs in which the upper and lower sections (Thigh, Shin, Upper Arm, Forearm) are composed of chains of bones in and of themselves. I have included a screen shot to show a simplified example of what I mean.
When working FK, of course, this is no problem at all, but sometimes I'd like to be able to use IK solvers to make placement tasks easier. Unfortunately, applying an IK solver means the bones forming the upper and lower parts of the limb also bend as the limb bends. In the screenshot, the bones on the left are an example of what sort of limb I am dealing with, the bones in the middle show the effect of using an IK solver (note the bend in the upper and lower leg) and the bones on the right show what I would like to achieve using IK.
So, is there any way to lock the motion of those bones composing the upper and lower parts of the limb so they won't bend as part of an IK chain? I'm using Max 2010 by the way.
So I've come across a simple roadblock, I can't seem to be able to link the bones to the mesh. The bones pretty much move as if they were separate from the rest.
As the dozens of videos I've seen, the process is usually the same: after creating the mesh, go to Helpers > CAT Objects > CAT Parent, choose a RIG(Base Human) and add it.
So I do all that and fit the rig to the character. After that, go to Modifier List, choose Skin, click Add and select Base Human bones. In the videos, that's when everyone always goes to the motion tab, add the CATMotion Layer, and the mesh and bones move together.
I don't know what I have done, but the bones aren't shown. However, the joint point (the circle ones) are shown.
I'll attach a picture.
When animating, I have to manually key all the bones on frame 1, and then manually key all the bones on frame "whatever". If I don't key every bone myself, then bones I missed on frame one will become the same as the ones on frame "whatever". I was wondering if there a way to select and key all the bones at the same time? I tried, just slecting all the bones in one 'left-click', and that only seems to key the root bones.
I am actually a 3D modeler from a different program trying to learn Maya. I have spent the past 5 days just watching youtube tutorials, but for some reason they do not seem to have the problem I am having.
Here are what my setting look like: [URL]...
Got this low-poly model here. I created some bones for it and inserted them into the mesh. But when I use the Skin Modifier into it, and use the 'add' button under "Parameters". No bones appear in the list?
View 1 Replies View RelatedI created a frog character that is all one mesh, and created several facial mouth movement Blendshapes. When I test the Blandshapes they work great. Problem is, when I move one of the bones of the skeleton like his leg for example - and try one of the blendshapes, it blend the mouth perfectly, but also blends the rest of the mesh of the character back to his original position (non-bent leg). I was under the impression Blendshapes were only related to the mesh and not when moving bones?
View 2 Replies View RelatedI created a rig in MAX 32bit but recently loaded 64 bit MAX but now when I choose the skin modifier/edit envelopes, I cannot choose bones to edit. The interface just flashes and I am not able to select verts on the mesh. I had originally used the weight tool to change the weights of each vert on the mesh, now it doesn't work at all.
View 1 Replies View RelatedHow can I apply my biped to the bones of a diffrent model? I have tried the Position and Orientation constraint bit with the second one my model messes up. Are there any different ways to apply it?
View 3 Replies View RelatedI have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies View RelatedIn the timeline panel in CS6 EXTENDED, you have a video feature, where you can animate three things:
Position Style Opacity
What I would like to know, is: How can I animate rotation of a layer? I want to rotate my layer at an angle and animate it. But when I rotate, the first animation frame is also rotated, resulting in NO animation between the frames.
How do I remove the blues eye lines and text when creating a animation preview?
[URL]
My current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies View RelatedI'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points
2. connect the points with a curve
3. loft a circle using the curve as a path in order to make a rope
4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.
i need to do a loop animation of several stripes that starts at lets say 2units distance from each other, they separate slowly and by the end they have 15units separation, my problem is that each stripe is a separate object, so i offset their keyframes, but when i want to tweak the keys on curve editor they dont apply to the other copies. Any other way to do this simpler?
quick example on the image attached, real application on the video, video shows the animation(rendered sequential images of 1 loop then applied as texture) but with linear speed, so constant separation, i need to apply the above here, these dont only move on the X axis but on the Y aswell, while keeping the symmetry fixed on the center.
[URL] ....
I have a list of motion capture, those mocap didn't track the fingers so the hands are always opened. In some of these mocap I need the biped hand to be closed. I've been looking for a solution for about a day now. I think I'm in the good way which is to create a biped layer animation where the hands are closed and link the hands of that layer to the original layer. so I would be able to save that layer and apply it to every mocap animation that need to be readjusted. The only problem is that I'm not sure if it's the better way and I don't know the procedure.
View 2 Replies View RelatedI have an assignment for a class where part of the final project is detailing the construction of a mold for a part. The animation that I would like to do would show the build up of the part in a 3D printer layer by layer. The closest method of animating this that I can think of is unfortunately backwards.
As I would have the part and a camera facing up from the bottom of the part and would have a plane that would recede upwards in the y direction. This would reveal the part as the plane translates in the y direction.
This might be okay, but the problem is that I would like to show this from a camera on top facing down instead of a camera on bottom facing up. How I can create the look of a part being built up in this additive method?
I am trying to add an expression to the standard Mudbox car to make the wheels turn when the vehicle moves in both the X & Z dimension. I have found many scripts that let me do this in a single dimension. I have found some others that claim to work for both dimensions, but at certain angles the wheels turn in the wrong direction.
My work flow is as follows:
1 - Export car from Mudbox to Maya
2 - Separate the wheels & center pivot all items
3 - Add NurbsCurves to create a rig
4 - Parenting the elements of the car
5 - Add an expression based on this web post [URL].......
6 - Test the animation
It works great when translating the car in the Z axis, but when the car is rotated 95 degrees in the Y axis the wheel will only go backwards no matter which direction the car is moved.
I have attached an MB (Maya 2013) so you can see the
problem.mudboxcar_maya_2plusexpression.mb.zip
translate facial motion capturing data (basically 2d point clouds) to blendshape weights. I finished rigging my character and wanted to drive my blendshapes by the relative position of my tracking data, e.g. distance between corners of the mouth drive the "wide" blendshape and so on...
Hope YOU know a solution for this, I believe blendshapes are THE way to create realism in tracked animation but I was not able to find ANY reference to something like that. I'd like it to be customizable and not to expensive, so the imagemetrics faceware service won't do for me
How come baking some part of animation in graph editor deletes everything before and after the part i bake and how can i bake that part while leaving the rest untouched?
View 2 Replies View RelatedI have a character with animation. Another character is the same(same bones, meshes), but with no animation, 100 times larger in size and I resize the head to make the head looks slimmer. They are saved in different fbx files and I imported them into mb scenes. I select the root bone and "select hierarchy", the export options is shown below. Then select in the same way in the larger character's scene, the importer options is shown below. THE PROBLEM is: after I import the atom, the character becomes shrinked to the same size as the former one and the ratio of head becomes the same as the former one too.
View 1 Replies View RelatedFor some scenes we have a chain which is wrapped around several cogs, just like a bicycle. In this scenario we need the chain links to follow the path and retain their relationship to each other.
In other scenes we have a chain which follows along a changing path. Imagine this if you can: A heavy weight has a chain attached which goes vertically up, over a pulley and down the other side where it is attached to a lorry. The lorry drives off pulling the weight upwards. This is my challenge!
Should I individually constrain the links using a Pin constraint and use dynamics completely to keep the chain taught?
I am trying to synch several biped characters to an HD background video I have placed in the environment slot. The problem is that when I scrub the animation slider or hit the play button, Max cannot play the background video in real time. When I hit play, the video remains frozen on whatever frame it was last on, but then updates to the correct frame when I hit the stop button.
It is pretty difficult to get the timing right on the foreground biped animation without a real time background reference. I also tried a lower res version of the background video (standard 720 x 480 DV), but that also does not play in real time. Is there any way to get max to play the background video in sync i.e., updating the frames in real time? Is there a way to improve max performance (ideal settings?)for a background video? Would a Tiff sequence play quicker than a .mpg or .mov files? If so how do set up an .ifl for playing an image sequence?
Was wondering if there is a way of getting random camera movements? For example, i am doing a fly through of an earthquake scene and as the camera animates along the street it randomly shakes with the earthquake shocks.
I know I could animate it by hand but I wondered if there was a way (perhaps an expression) to make it more simple?
I have made a 3d Spectrum analyser , its made of rectangular boxes 16 rows and 16 boxes in each row.
So i have made my cam from Bottom Left corner to Top Right over 96 Frames.
What i need to do, is make some of the blocks disappear and re appear as the cam pans across.
In sketchup i did it by HIDEING the component (block), make new scene, then un hide it..
