I 'm using XDP pro X and made a logo for some friends of mine and exported it to PDF using commercial printing PDF X. When you look at the pdf the colors are a bit more flat than in the PNG or JPG export. Also you can see an aditional line in the black line arround the stones. How I can get the same colors as with JPG export and get rid of the line?
View 9 Replieswhen I use the flat brushes to paint the colours are not flat but are of different tones of the color in the shape of the brush.
View 1 Replies View RelatedI recently started using PS CS6 and edit the photos in ProPhoto. My stock agency requires flattened TIFF images for submission. They look fine when I send them, however after they load them on the site the colors are very flat. I understand that when saving for web I must save and convert to sRgb. Is there something I need to do to the TIFF file prior to submitting or is this something that needs to be resolved by the agency prior ot loading on the site?
Here are links to
1) a side by side comparison
2) the image as it appears on the stock site
URLs....
Can I convert 3D-rotated extrusions to flat shapes again?
Because, I'd like to create outlines and shadows of added and intersected extrusions. So, I think, I should try to get flat shapes from extruded objects (extrusions), shouldn't I?
I am trying to develop a macro that exports all flat patterns for sheet metal components. I haven't been able to get the following code to work. It give the error message "The document you are trying to save is not a drawing document"
Sub PublishDXF() Dim DXFAddIn As TranslatorAddIn Set DXFAddIn = ThisApplication.ApplicationAddIns.ItemById("{C24E3AC4-122E-11D5-8E91-0010B541CD80}") Dim oDocument As PartDocument Set oDocument = ThisApplication.ActiveDocument Dim oContext As TranslationContext
[Code] .......
I am trying to write an external iLogic rule that will export the unfolded model of a sheet metal part in a drawing from a rule triggered in the .idw. These drawings will contain only one model reference. The reason for doing this from the drawing are as follows:
1) The location of the resulting .stp file must be the same directory as the .idw file. our file structure does not co-locate these files so the drawing path is required to locate the .stp file.
2) The current Drawing Rev level is to appended to the .stp file name. We do not populate the Rev iProperty in the part.
I have scabbed together some code from verious deep dark corners on the internet and Have arrived at the code posted below, but It errors during the .stp file creation with the following:
Error Message:
Error in rule: STEP Export With Rev, in document: 4000401-02 Blank Pattern.idw
Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))
More Info:
System.Runtime.InteropServices.COMException (0x80004005): Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))
at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
at Inventor.FlatPattern.Edit()
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule).
I have problem with Save As Command from Flat Pattern in Sheet Metal Mode. I want to export to DWG file from Flat Pattern to send this layout to our Laser Machine database.
I'm using Inventor 2010 with Vault Manufacturing.
I have created some curved straightening vanes to go inside a large square duct 90 degree elbow. Each vane starts with a 6" long straight section the its follows a fixed radius through 90 degrees. When I "unfold" the part the resulting face becomes two separate faces. When i right click to export as dxf i can only export one face or the other. How can I combine this into a single face to export?
View 4 Replies View RelatedI have a part that we will cut out on a CNC plasma machine that will undergo a drilling operation. We create all the parts that will be cut on the plasma in the sheet metal environment because of the simple flat pattern export. Our plasma machine has the ability to scribe lines and also create center punch marks. It distinguishes between cut lines, scribe lines, and center punch marks by layer name. I need a way to get the center points of the drill locations into their own layer.
View 9 Replies View RelatedJust working through a few designs and noticed that quite a few of the Pantone colors don't exist in XD7 Pro so far all six colors i wanted to use are not in the libraries. How to update the Xara Pantone palettes.
View 4 Replies View RelatedI'm trying to match the background color in Xara Photo Designer to the background color in a Filemaker Pro layout. When I bring up the color picker in Filemaker, I get a generic Windows screen with colors expressed in raw numbers, not percentages, but Photo Designer appears to use only percentages, no matter which color model I use. How do I convert Windows integers to Xara percentages?
View 5 Replies View RelatedI'd like to saturate all colors in 132 .xar files.
I had a look at xarlib and I did not try to compile something since I first need to get Visual C++ to use the supplied pre-built libraries, and I thought I better wait and ask, because in the documentation there's written the year 2007, so Xarlib might be out of date and not work with current .xar files.
My questions:
-Is xarlib still up to date? And is there a sample or framework that I could use to manipulate .xar files?
-Is there anything else that I could try?
Current problem is that I've created certain colors for an art piece - basically, it's different poses of a character. I'm outlining each pose on a separate Xara page. So I've inked in the first pose, and, in so doing, created a couple of new colors, which I've named.
Those new colors do not show up in the color palette when I open a new page to ink in another character pose - the palette just defaults to its basic lineup. Is there a way to create a new color and keep that color in the palette for any and all art pieces?
I want to detect percentages of my artist's oil colors in any area of a vectorized photo that I point to.
So, I want to first vectorize a photo to reduce it to manageable separate color areas. Then, I want to be able to get a list of the various percentages of 108 different colors that make up any of the vector color shapes I point to or select. These 108 different colors are somewhat accurate small bitmap swatches that correspond to 108 artist's oil paint colors.
Alternatively, can I just somehow plug in this 108 swatch palette and have a software (Xara?) break down a bitmap into areas of vector color using only this custom palette?
Is this possible in Xara, or by any other means you know of?
I'm trying to work with linked colors. I understand and can successfully manipulate both "Tint of another color' and "Shade of another color." I'm having a difficult time getting "Linked to another color to work as expected. The help document doesn't seem to offer much.
+ I create a named color called "S0" ('s'-zero). It appears on the left of the color pallet as a square.
+ I create a 2nd named color called "s1", and instruct that it's to be "Linked to another color". The color that I select as the Parent is "S0".
+ I see no way to control what linking attributes are to be assigned, aside from simply checking on/off the H, S and V option boxes.
I am new to designing.
1) What is the difference between CMYK and PANTONE colors?
2) How can I convert CMYK colors to PANTONE in Xara Xtreme PRO 4.0
I've got an object that I've filled with a circular fill/gradient. Is there a button that allows me to swap the start color and end colors in one click? If this was a linear gradient I could just position the start and end points to reverse it but since its circular I must swap the start and end to retain the circular effect.
View 6 Replies View RelatedI want to paint an object with beige wich in the RAL color chart is RAL 1001, how to match the right color with xara since colors are not by name ? Can we search colors by name in xara photo & graphic designer 7 or later versions? what about if i need a pantone color for example ?
View 9 Replies View RelatedI can add my own colors to the strip at the bottom of the screen, but time and time again I need to use grayscale that has to be just gray and its not! For instance if you pick 50% black and then click on CMYK scale it turns out to be C:49% M:45.5% Y:32.5% K:11%...Why is it not 0 0 0 50?
if you send something off to the printers with what you think is small grey text that looks sharp on your RGB screen it may well be fuzzy when you see it in hard copy from an offset press.So it would be great to redefine the standard strip, or at least be able to load a user strip every time the program starts.
I'm exporting a design for the print shop, and have the following problem:
I have converted all colors to CMYK, and that's fine so far... however, I have imported a few PNGs with alpha channel into the design, and in the PDF output, these create a 'box' around them that seemingly has a flattened RGB version of whatever was behind it + the PNG image.
Same happens with any objects that have drop shadows.
I was trying to learn about naming colors. I named a color, only to find it was now in my default color palette, which was now 'Untitled1'. I did not want to have the default palette that opens on the Color Line when I open the program changed and requiring me to rename it every time I named a color. I tried to undo my actions but had only partial success. The new named color is gone, but the color palette is still 'Untitled1', and how to restore the palette name. How can I correct this?
View 9 Replies View RelatedI have created several tutorials receintly that allude to the power of named and linked colors. In this video tutorial I show you how to create your very own named and linked colors in Xara products. Not only that, but how to add these colors to your default template so that the new named and linked colors will appear in any new projects that you create with that template.
View 6 Replies View RelatedI would like to know how to change the colors of the charts that Xara brings in the Design Gallery.
View 8 Replies View RelatedHow do I control which colors appear in the color line that scroll across the bottom of the window. The only colors that currently appear are shades of reds/purples and yellows/greens. If I scroll across from left to right the same colors just keep repeating themselves. There are no shades of gray or blue. Can I somehow preset the colors that appear or do I have no control over what colors scroll across the bottom.
View 4 Replies View RelatedI am attempting to edit a scanned abstract drawing where many of the colors are similar, resulting in them printing as all the same shade of red. I am attempting to change some of the reds to have a greater degree of shading. I am aware that I can probably do this using masks and RGB tweaking; but it occurred to me that I can also use a drawn shape and color fill with transparency to change the shade. This worked very well; but it caused one problem I don't know how to solve.
The image I am editing is intended to be uploaded to a website named Zazzle that takes your artwork and puts it on their products. This includes anything from notecards to canvases, to clothing, to shoes, etc., etc. Customers browse the site to find products and images they like. I also have a free webpage on the site where I can promote the sale of these items with my artwork on them.
The image must be a high resolution preferably png file which can be resized greatly for the canvases or left as is for notecards and the like.
While experimenting with the size of my image, I discovered that the edits I performed stay the same size while the rest of the image increases. Is it possible to make the edited shapes part of the scanned image so they will increase and decrease with the rest of the image?
How come sometimes when I open someone else's PSD file it shows up in kinda a wrong tint of colors. Then when I export it, it is the right color. For example, I open something that is sapposed to be grey, but is kind of an orangey-grey....but when I make my changes and export the slices to JPEG format, it is the right color grey.
View 1 Replies View RelatedHow can I export a pdf/x for commercial printing and have the black text export as 100% process black, not cmyk tints?
View 6 Replies View RelatedEvery time I try to export this file to a .pdf I get an error: "access violation exception at 0xF440D0D0" and the program crashes. I did a search on TalkGraphics without finding something.
View 5 Replies View RelatedI trying to export (as a cmx) from xara to corel, and yes it opens in corel but it has lost any blends and feather regions that were created in xara, I need to move files into draw, so that I can then export them as cad files, am I doing something wrong, is there another way of creating cad files in xara?
View 3 Replies View RelatedDoes the embedding of color profiles no longer work in Designer Pro 6?
Try to export as PDF.
Preset Selections: Custom.
Click on Advanced Options.
Choose Pre-Press.
Here I chose a custom color profile (PSRgravureHWC.icc), which significantly changes the colors.
Everything worked okay in Xtreme Pro 5.
But now, when I switch on Embed profile, the resulting PDF shows the same colors, as if the switch was not ticked.
I haven't used Xara in a while but tonight I did some adjustments on a jpg and tried to export it as a .pdf. For some reason I do not have the option under Export Files to export to a pdf. I know I have done this many times in the past. Is my Xara corrupted or something.
View 9 Replies View Related