I just purchased a portable audio recorder, a Zoom H1, to replace the built-in microphones on my JVC video camera. I did this to be able to improve the audio component of my finished videos. I planned on using the audio wave form display that shows up when you activate the Sound Mixer component of VideoStudio. I am recording in .wav file format, as I read previously on this board that VideoStudio works better with wave files than with MP3's. When I put the wave files onto the timeline, and activate the Sound Mixer, It says it is loading the sound data, but does not display the complete wave form info. I have tried recordings made at different qualities, with varying results, as follows:
44 Khz 16 bit - does not display any wave form data
44 Khz 24 bit - displays wave form for part of the file, but not all
48 Khz 16 bit - does not display any wave form data
48 Khz 24 bit - displays wave form for part of the file, but not all
Just for grins, I tried the same audio files in VS X4, same thing. Maybe I'll play with MP3 format files, just to see what happens.
As I mentioned above, I tried recording a file on the Zoom H1 in .mp3 format. The audio properties, as repported by VideoStudio were 44 Khz, 16 bit, 192 Kbps. This file was accepted by VideoStudio with no problems displaying the complete wave form for the complete file. Which it did not do for the .wav files created by the same recorder. I will do a complete test on Sunday, when I will try recording our church service as an .mp3 and videoing the service and see how it works with syncing the two files.
Is it possible to have an audio file that's placed in the timeline display the actual wave image rather than just a blank bar?
It doesn't seem like it but thought I'd post the question as other similar editors do have this feature and it seems pretty standard and EXTREMELY USEFUL!
I have X4 Pro, X5 and X6 Ultimate installed on my computer; as well as, a few older versions of ULead software. I keeping getting this message: "device error. Cannot open the wave-in device" every time I try to use the microphone option in X6 to try and narrate my video.
The microphone option works fine in X5...
The trouble is I am using the track motion option from X6 in my video, so I cannot open the video in X5. Is it some sort of driver problem, or is there a corrupt file that needs replacing etc...
How can I increase the size of the sound wave in the time line. When I use the zoom tool to increase the size, it increases in width but not height and I need to see the wave in a larger view regarding editing and syncing etc. Using x4
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
When I insert a video to the timeline the only way I can have sound playback is to open the sound mixer. I had this happen once before and I reformatted my hard drive and re-installed everything and It worked fine for a while but now the problem is back. What is causing this to occur. Even when I insert a sample sound into the music track I get an error message when trying to play the clip.....Unable to play the file (16804:2:1)......and it won't play in project mode unless I use the sound mixer.
One of the features I was really looking forward to in CS6 was creating fillable forms with ONE application. I created a form following the step by step instructions in classroom in a book for CS6. When I opened the exported form in Reader X, I get a "This operation is not permitted" error. I opened the completed "end" document in the lesson to make sure I didn't commit an error, and I got the same message when exporting. I have looked for places in menus to modify security restrictions and I can't find any. I installed the updates and that didn't solve the issue.
I saw one solution posted which is to open the document in Acrobat, then do a "save as" option. Is there anything we can do that doesn't involve buying additional software? If this is not the case, then Adobe seriously needs to change its training and advertising about this functionality.
I have on .avi video file from friend, that I can play OK with sound in VLan player, I just installed X3 and tried to make DVD from it and got it without sound, same thing if I play this loaded .avi in X3, don't have any sound ? Is there any secret encoding I have to look for ? Somebody told me that X3 will eat any format.
I am having a problem with way slow audio in Ulead Videostudio 11.5 plus. I know it's an older version, but the format is similar or the same for some of the programs and maybe someone else has had that issue on even a new software version.
I managed to make some music videos with the software, after going to Youtube, as the manual for the software really isn't that great in all honesty. it simply doesn't tell you much detail on doing things. Putting in a music track to the video clips and then turning the sound on each clip all the way down wasn't a problem, but now that I want to do a normal video-I'm finding the sound in the virtual clip or whatever(which I recorded into my digital camera-mov. files), plays like Jabba the Hut off Starwars!
What do I do here to make it sound normal and be able to edit properly and share it in normal sound?I tried splitting the audio and then it sounded normal, BUT it still had that nasty slow sound on the audio. No matter if you mute it or pull the sound down in the video/audio clips in editing. How do I get rid of that slow sound or change it to make it right? Do I even need to split audio there?
So I go to edit some video and now all of a sudden there is no sound/audio playback in any of my clips. The files are fine. They play fine in other software, and in other editing software as well. But this is the my software of preference and I can't use it. WHAT THE HELL HAPPENED. The same thing has also happened to my DVD Workshop 2 software. And the same thing happened to at least 3 previous versions of VideoStudio. Everything works great and then one day BAM, no audio. The data is there because if I go ahead and render it again and play the new file on something else the audio is still there. So the problem is only on Corel/Ulead products. As a matter of fact I just downloaded the VS X3 demo. I cannot find anything about it online anywhere. If I cannot figure this out I am NEVER going to buy another Corel/Ulead product again. And I am a longtime user, way back to version 3 or 4. And for some idiotic reason I keep buying the new versions.
Slideshow Creation: I'd like to make a slideshow DVD for Xmas to give out. I've made a lot of movies with VS but never a slide show and in fact i've never created a slideshow in any program.
Is this possible in VS10 or would it be better to use DVDLab Pro for this? If VS10 is sufficient to do this (just a fairly basic slideshow NOT HD). I really can't grasp it from the Manual since it really isn't covered in detail there (or did i miss it?) I'm looking to see what types of photos/graphics files and what resolution as well as a HOW TO. I'm clueless about slideshow creation.
Audio DVD Creation:
I do seem to recall that i did this once in VS10 - or was this a dream? Is there any tutorial on this as well?
When using the audio fade in and out to activate the fade should the bars be highlighted or dimmed? I don't seem to hear any difference between them. (Vid pro x4)
I got a new camera that outputs .avi files, and put together a video. When I click an individual clip in the timeline and play it, the audio plays... however, when I play the project, the audio does not play. It also does not play when I render it.
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
I have VideoStudio X5 Pro. Trying to add voice over using a mike. Problem I am having is the volume. On playback I can barely hear my voice. Have raise the volume level in X5 to the max, still have the issue.
My PC got a virus and I had to reinstall VideoStudio 11 afterwards.
For the first time since, I've burned a multi-chapter DVD and when I play it there is no audio on Chapters 2-4 but it sounds fine on the menu music and the first chapter. Each chapter is an AVI and plays fine in VS and then in the menu preview.
I've reinstalled the software a couple of times and tried a different DVD+R but still no audio on half of the disc.
I have been using VS11+ for a few years, and have never run across this problem until now. I am trying to import DVDs recorded on a specific machine and am getting video but no audio. There is audio on the DVDs. I have tried importing both as mpg and as avi (in project properties) but neither works. Although I've been using VS, I am self-taught and not very knowledgeable about codecs, recoding, etc. I mainly use VS for importing video from DVDs, editing, rendering and burning onto DVDs. I am not certain of the make/model of the DVD recorder, but I do know it is new. (I did a keyword search for "import DVD no audio" before posting, but it returned over 2,000 results).
I used to work in MediaStudio Pro which I really like it because it is very user friendly, then suddenly Corel killed them all by buying them, and never continue that wonderful program.How to edit the audio on the timeline? What I mean is, in MediaStudio Pro, from the Audio in Timeline, I can raise the audio up, then few minutes, low it down, then few seconds later, raise up again etc...From what I see right now on X6, for audio I can only either use the Audio filter to low down or to raise up the whole clip but not, raise up or low down at at any part that I want to.
In my current project, after spliting the audio from a certain clip, the Audio Filter buttom is greyed even the audio clip is marked, so I can't use it. It doesn't happen to me in previous projects.
I downloaded free trial of Video StudioPro When i am capturing video from external device and the video captures OKAY, but there is no Audio when i play back the video????
I add a video to the timeline video track (not the overlay track), and with 'clip' selected and playing... I have audio just fine, for the most part... sometimes the audio jumps and skips, and sounds garbled. With 'project' selected and the video playing, either the same thing happens as the 'clip' or there is no audio at all.
What I have discovered, is that this is common with AVI files. Other files, such as WMV, don't seem to have this problem. It affects only AVI files. The video plays just fine in WMP and VLC, as well as other video editors such as PowerDirector... so why dos VideoStudio have this odd sound issue? And I'm sure as Hell not gonna convert all my videos to WMV just to edit them.
This is on a fresh install of VideoStudio Pro X4 (as well as Windows), no updates, no Service Packs, no nothing... even WITH SP1 it's still does it. I've also removed and reinstalled my codec packs (from K-Lite to Shark007) with no difference.
I've also hear that people are now having this issue with VS Pro X3 as well (I have X3 to) so I assume it's pointless to install X3 as well. I really do NOT like using any editing software other than X4, since it's the best one I've used... so I do not want a reason to use something else.
I've recently upgraded the PC and re-installed VS10 onto the new, improved, beast in front of me now, but have hit a hurdle.
Whether I'm looking at an imported project or starting a new one from scratch, I seem not to be able to get the audio tracks to play when playing the project as a whole.
I can select the music track and play it from within the timeline without a problem, but select the project and all I get is the sound of silence.
after scanning and searching the forum I can't find anything that fits my bill so far.
Drivers have been checked and updated where found wanting. I'm at a loss to explain why. I never had this problem back on the old slow-coach...!
For info I'm running Vista on a dual core 2600Ghz machine with Asus P5K Pro 'board (on-board audio) and a GeForce 8600 GTS graphics card.
When I create a DVD from the project, the 'normalize audio' option in grayed out and cannot be selected. If I choose AVCHD, Blue-Ray, or BD-J the option is available. I only have the problem with this one project, all the other work ok I installed Video Studio on a new computer and copied the project to the new computer, and had the same problem so it must the tied to the project. I opened a log with Corel tech support but with no results. Version is X5 Ultimate, build 15.1.0.34.
I've uploaded MPEGs from Panasonic DMC-TZ7 on HD quality. Audio works fine when playing clips and when played on Quicktime. When playing back on Project, I get a chopped pulsing noise on some parts (although they play OK as clips). I used simple fade to black transitions and trimmed clips. When I finish project, the sound was OK on the first clip but I get no sound or the odd pulse of sound on subsequent clips.
I have re-installed VS pro X3 and downloaded the latest patches but it makes no difference.
I just recently purchased Video Studio Pro X4 and found it to work well in most respects except when I have no audio when working with AVI files. I have wanted to burn to DVD but can not hear any audio. I have tried installing the KLite codec package as well as any other codecs I could find that might be relevant onto my Windows Vista Ultimate 64 bit system.
when ever I bring a clip into the timeline and play it as a "Clip" the sound is fine. When I play it as a "project" the video plays normal but the sound is slowed way down out of sync. This problem carries over to the burned DVD also.
