How to normalize 2 runtime of jobs running on 2 different CPU speed so that I can compare the runtime? I have heard about PSB = runtime(seconds)/cpu speed(MHz) x 1000. I don't know what is PSB and I'm not sure it can be used or not.
View 1 RepliesWhen I create a DVD from the project, the 'normalize audio' option in grayed out and cannot be selected. If I choose AVCHD, Blue-Ray, or BD-J the option is available. I only have the problem with this one project, all the other work ok I installed Video Studio on a new computer and copied the project to the new computer, and had the same problem so it must the tied to the project. I opened a log with Corel tech support but with no results. Version is X5 Ultimate, build 15.1.0.34.
View 14 Replies View RelatedOne of my gigs is as a school photographer. When looking at all the photos as a group there are slight variations in the levels and tones. My way of dealing with this is to go through them in LR one by one and make adjustments to make them all look like they have the same tone and levels. I typically do this with the the highlights, shadows and sometimes the exposure sliders.
Is there a way that I can define what I want an image to look like in terms of it's "brightness" and then automate a process that will make all the photos in a group look the same?
I can use either Lightroom or Photosho CS to accomplish this. I have a Creative Cloud subscription if there's any other tool or application.
So here's what I've got. I've got a scanned image of the unit patch...the problem is the image shows the thread lines, which equate to different colors. I need to normalize the colors across the entire image...i.e the helicopter should be solid black and the background solid red etc.
Not much of a Photoshop guy but I'm learning OJT it seems. I have both Photoshop CS5 and Illustrator so whichever works best I'm game to use. I've attached the image in question.
I've done all I can to correct this issue including going into the reistry and removing the lines pointing to the old plugins folder. I'm still getting this Runtime error and now all my new plugins CRASH Photoshop CS6 Extended. This is horrible. I just bought Alien's bundle and can't even run it without Photoshop crashing out. NONE of the plugins that are new and built for 64 bit apps is crashing. So I'm stuck until I can get this resolved.
IS there another folder / directory with the paths that I can delete since the registry edit didn't seem to do the trick? I've unchecked the box that points to this directory and yet Photoshop still has it recorded since when I start the program and get to that Preference page shows it, grayed out, but it's still recorded. Why are there two areas for this information to be kept in the first place? Makes for a mess like this very issue.
How to call AutoCAD Command with .net C# on runtime?
For Example,
After opening my Drawing File thro. .net C#,
acApp.ActiveDocument.Application.ZoomExtents();
I need to use the AutoCAD command Oleopen
acApp.ActiveDocument.BeginCommand.oleopen();
Here is some error.
Normally how to use the AutoCAD commands with .net C# programming.
I created an html page with rollovers and when I open it in IE, I keep getting a runtime error.
View 1 Replies View Relatedhave the CS3 suite, education version and i'm having problems whit photoshop. All the other programs work fine (flash, fireworks, premiere, etc), but photoshop crashes at startup.
I already disabled plugins, checked permissions, everything i can remember. The problems exists with domain and local (power and normal) users. Photoshop runs with local administrator but not with a domain admin, and i don't have any kind of policie restricting the domain admins.
The error is a "Runtime error" at the end of the loading, right after "Building menus".
Details of the error report:
AppName: photoshop.exe AppVer: 10.0.1.0 ModName: scriptingsupport.8li
ModVer: 10.0.0.0 Offset: 0015eebd
We have re-imaged our school district computers with XP SP3 and IE7, and now on Creative Suite CS3, only Photoshop will not open as a student. It opens only as administrator and students get the runtime error. All other apps in the Suite work fine. They worked with the same install job before the updates, and reverting back is not an option.
View 8 Replies View Relatedwhen I try to install the German Photoshop trial I get a "Laufzeitfehler: Objekt erwartet Zeile 31" (Runtime Error: object expected line 31) after initialisation of the installation program. When opening the Script Debugger it points to a file main.html in Common FilesAdobe/Installers...
esources. The Debugger stops at the line: "body onload="AhmbedGUIWorkflow()" id="standardBody"" (without quotation marks). What can I do to avoid this error and install the trial?
This has only started happening during the last 2 days after adding the /3g boot.ini patch to try to resolve a CS4 slowdown issue. It appears to have fixed the slowdown issue (although I'm not sure it has stayed active long enough to say that for sure) but is now randomly crashing. The error in event viewer is as follows Faulting application photoshop.exe, version 11.0.1.0, stamp 499bf9b5, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x3a753913.
There is no pattern to the crashes. It has even crashed when it has been in the background with no image loaded. I know I could remove the /3g patch & hopefully CS4 would stop crashing, but then I would have to live with the slowdown issue. I want to have my cake & eat it too. Any ideas ?
Illustrator getting very slow after 20 min... By closing the app I get a runtime error (Microsoft Visual C++ Runtime Library) R6025.
View 1 Replies View RelatedI am getting a runtime error r6034 with CS6 downloading.
View 3 Replies View RelatedWe're running X4 and are getting a RunTime Error every time we seem to edit a text box and hit the space bar. We just installed SP2 and that's when we began noticing this glitch.
Seems to be specific when we add a 'space'. We've done full UNINSTALL and REINSTALL but it seems to happen every time.
"Could not load file or assembly 'acmgd, Version=17.0.54.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified."
This is the error i recieve, i've already referenced the dll from local installed folder, and made local copy as false. but also i recieve this error...
I'm replaced my previous Gimp (I don't know version, but not very old, portable). And new version did not start - "Microsoft Visual C++ Runtime Library error. this application has requested the runtime to terminate it in an unusual way..."
I found (in gimp-user-list archive) sugestion to switch display to 32bit mode. That was the solution, at least for my Vista HE 32.
Now I installed the same portable Gimp on remote (win7, Ult, 64) and got the same problem. Unfortunatelly, remote desktop does not allow to change display settings.
My PSE 6 ceased to run. I have uninstalled it using the provided uninstaller. I have tried to re-install but keep getting this message:
Microsoft Visual C++ Runtime library runtime error
Program E:/Adobe Photoshop Elementssetup.exe
This application has requested the Runtime to terminate it in an unusual way..I have PSE 10 installed and it runs OK BUT I prefer the older v6 which has Twain support for my scanner
A power failure shut down Photoshop Elements organizer and editor. Now I get a "Runtime Error when I try to open the editor. What do I do now?
View 1 Replies View RelatedI am new and I wanted to install and launch Illustrator on my computer on which there is Windows 7.The installation succeeded but when I click then on the icon to launch Illustrator, an error windows appears in which it is written:" Failed to locate VBox runtime DLL: C:/Program Files/Common Files/Vbox/Common/vboxat.dll".
And then, on the task bar of windows, it tells me that the color sets have been changed because my software is not compatible with windows 7.Thus, Illustrator never launch.
I came into work on Monday morning and started working on this business card design for an associate of mine. I got to the point where a first draft was almost finished, I went to save it as a PDF (keeping all the layers separate and retaining Photoshop editing capabilities), and it suddenly did this (attached photo). It's now Wednesday and not only have I never run into this issue before, but it seems no one else has because I haven't been able to find anything on it this whole time.
It seems to be saving to PSD and JPG just fine, but I need to be able to save to PDF for printing. I've checked a couple times to make sure Adobe Reader and Adobe Acrobat are fully up to date and they are. I've tried holding CTRL+ALT+SHIFT while starting the program to delete the preferences, and that didn't work. I've run a spyware/malware scan on my computer and it came back clean.
- I'm running Photoshop CS3, with the new 10.0.1 update
- Windows 7 Professional 64-bit /w Service Pack 1
- Dell XPS 8300, 6GB RAM, Intel Core i5-2300
- My system is completely up to date (according to Windows Update)
I'm trying to export my iam file to a 3D DWG file. When I do, I get the following error:
Runtime Error!
Program: C:Program FilesAutodeskInventor 2012BinInventor.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
The loaded file is a .dll written in Visual Basic.NET using Visual Studio 2010.
NETLOAD Cannot load assembly. Error details: System.BadImageFormatException:
Could not load file or assembly 'file:///C:Documents and SettingsdanMy
DocumentsVisual Studio
10ProjectsClassLibrary1ClassLibrary1objx86ReleaseClassLibrary1.dll' or
one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded.
I got this error opening a .dwg in C3D 2012.
Win 7 Enterprise SP1 64 bit
Intel i7 3770 @ 3.40 GHz
16 GB RAM
Civil 3D 2012 SP2
I am getting the following error message when invoking Maya through the command line with a script that sets the current renderer to mentalRay:
// Error: The renderer mentalRay is not registered yet. //
// Error: Renderer "mentalRay" is not valid //
RuntimeError: Error occurred during execution of MEL script
file: C:/Program Files/Autodesk/Maya2012/scripts/others/unifiedRenderGlobalsWindow.mel line 568: The renderer mentalRay is not registered yet.
I have searched some of the forums which suggest that deleting the userPrefs.mel, which seems to work (I can blow away the userPrefs file each time I run the script if need be), but it just seems like overkill for one (or more) values. Which userPref values are causing Maya to not register the mentalRay command when invoked from the command line?
ever since upgrading Gimp to 2.8.10 70% of all things I perform in Gimp results in an "The Application Has Requested The Runtime To Terminate It In An Unusual Way" crash!!! everything from using Gmic to just selecting a tool has resulted in this crash!!! text bug is gone but run time crash now new has entered Gimp!!! well back to 2.8.4!!!
View 2 Replies View RelatedWhen I start up the 64bit version of Photoshop CS6 I get the R6034 error. After about 20 times to delete the error message 64bit CS5 starts. This does not happen with the 32 bit version. How do I fix this?
View 13 Replies View RelatedI am currently experiencing a big problem when using X4 which is causing some major headaches here in the Workplace!
Whenever I hit space, paste text or do anything involving fonts I get a Microsoft Visual C++ Runtime Error folowed by a non-responding dialog with force close.
I have been using X4 for some years now and not sure what has caused this issue, it was fine in the morning and stopped working in the afternoon.
I have SP2 installed and no changes have been made to any settings to cause this.
X4 is the main programme I use here at work and this problem is grinding the place to a halt.
I'm trying to create a routine that enables the user to change the iProperties on an assembly through Apprentice. I had a sample file that was working last week but when I ran it again I suddenly have a runtime error -2147467259 (80004005). Here is the sample below:
Private Declare Function GetOpenFileName Lib "comdlg32.dll" Alias "GetOpenFileNameA" (pOpenfilename As OPENFILENAME) As Long
Private Type OPENFILENAME
lStructSize As Long
hwndOwner As Long
[code]....
I am using Inventor 2012, service pack 1 is installed as is hotfix DL17804781.
When opening certain Catia files, I get a Runtime Error. After I click ok, Inventor closes without the ability to send a crash report. I never had this issue using Inventor 2011, so I am not sure if it is new to 2012 or if I have something else going on.
Autodesk Product Design Suit 2012 sp1
Win 7, 64bit
HP Z400
Intel Xeon W3520 @ 3.07 GHz
16Gb Ram
Nvidia Quadpro 400 512MB
I build a program to "*.dll" by Visual Basic 6.0+AutoCad2006,when it runs in Cad VBA Environment,if it gets error,I try to get start again,It shows message:"Rutime Error 429:ActiveX Component Can't Create Object",and then message "440:Automation error".But sometimes,it works all right.Thats troubled me for a long time,I can't find a reason, so can't improve my program.
View 1 Replies View RelatedI randomly get a Microsoft Visual C++ Runtime Library error when working in Inventor. It points to Inventor.exe and says "This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information." I have a Quadro video card, Win XP, plenty of RAM, no other programs running in the background.
View 5 Replies View Related