VideoStudio :: Copying Audio From One Channel To Another
Jun 23, 2011
If I plug my lavalier mic into my camcorder, it records the audio in only one channel. Using VS (I have VS4), can I copy the audio from one channel to the other channel, so that the same audio is in both channels? That way, it comes out of both speakers and seems fuller. I realize it will be in mono, of course.
View 2 Replies
ADVERTISEMENT
Mar 2, 2011
I'm new to VS4 and am trying out the 30-day trial. I have a recorded HD TV clip that I am editing by making clips and adding transitions. However, after editing my audio now appears to be the Spanish SAP sub-channel. How do I get the main US audio channel back...I'm sure it's still there, but just not the selected audible one.
View 3 Replies
View Related
Jan 24, 2012
I've done this before on Pro X3 but don't remember how. I want to create a file with a Dolby Stereo LtRt soundtrack for you-tube. Last time I posted you-tube took a h.264 file.
One thing I don't remember is do I use 2 mono tracks (l and r) or an integrated LtRt stereo file. Right now I'm trying it with stereo file which plays on XP4 but the completed movie sounds like pink noise.
View 1 Replies
View Related
Jan 21, 2014
I am using Premiere Pro CS6 6.0.5. Double clicking on an imported 5.1 ac3 file in my bin brings up the 6 channels in waveform in Source panel. The channels are mapped L,R,Ls,Rs,C,LFE. This does not conform to Dolby Digital standard L,R,C,LFE,LS,RS. I have tried to set the channles this way in Audio Output Mapping in Preferences to no avail.
Question 1.-Is there a way to change the mapping to conform to Dolby Digital?
Question 2.- I use the Surcode plug-in. Will Surcode automatically map the channels properly upon export?
View 2 Replies
View Related
Jul 10, 2011
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
View 6 Replies
View Related
Nov 29, 2010
I have VideoStudio Pro X2. how to do the following using this software:
1) Copy a DVD into another blank writeable DVD
2) I have an ISO image of a DVD on my hard drive. How do I burn that into a DVD using video studio?
View 7 Replies
View Related
Sep 7, 2011
I've got two different softwares x2 and x4. I've been working on x4 a lot recently but would like to do some titles in x2 (I've noticed titles are handled better in x2 :O).
Anyhow, tried to do smart package from x4 to x2, but x2 wouldn't open the project
View 2 Replies
View Related
Mar 15, 2013
I have VideoStudio X5.I have saved my completed video as a video .m2t file and as an AVCHD file neither of which will replay on the computer if I click on the file folder. If I copy them to a USB stick they don't replay on the HD tv either. Both play as discs on my laptop quite happily but how do I transfer them as videos to a USB
View 14 Replies
View Related
Jun 16, 2011
I have in my VS11+ a lot of mask transitions installed, If I remember well they came from the content pack or the bonus pack. when I list the existing list in X4 they did not exist. How can I copy them to X4. Which files should be copy from vs11 to x4 and to which folder. I also have OLD add on transitions that I used in vs11+ on XP like BORIS Factory. I managed to install it on the new pc and at the first look it "work" (The Boris menu open) But when I press on any of the Icons X4 crash !
View 1 Replies
View Related
Mar 13, 2011
I have a bunch of templates I created, and VS supplied, in VS 11 and X2 that I'd like to get over to MF 7se (That came with X3). When I open MF 7 through X3 there are only about ~12 DVD menu templates to chose from (Even with "ALL" selected).
Is there a way to get the older ones to MF 7 se?
View 3 Replies
View Related
Jun 8, 2012
I am using X4 and am familiar with chroma keying and setting backgrounds but I am trying to export the video with the alpha channel so I can create a flash file with transparency to use for walk on video (where the person appears in the foreground of the site with wmode set to transparent).
I have Corel Motion 3D and some of the kbase was suggesting I needed to use that to export with the alpha channel but it would be a lot simpler to be able to push it out from X4. Even if I can do it as non-flash file I can take it to something like Ijoysoft and convert to flash.
View 14 Replies
View Related
May 27, 2013
I need to output xparent alpha backgrounds in .png image sequences can X6 do this? Other formats are fine but preferably I'd like to use image sequences.
View 2 Replies
View Related
Jan 19, 2011
I'm developing a project that is made up of clips taken from several other projects. Right now I go to one of the source projects view and find the clips I want, write them down and their location and so forth through all the source projects. Then I go and try to build my new project using this info. As the project grows this starts to get confusing. If two projects could be opened at once it would work but that can't be done.
View 7 Replies
View Related
Jan 31, 2012
Is there a way to adjust left or right stereo volume separately? I recorded a live performance with vocals to left and music to right so I can have more control of the mixing levels. So far the only thing I can figure out is to import the same video file into the music track and duplicate the audio so that it plays left, and the video track plays the right.
View 2 Replies
View Related
Jun 4, 2012
I'm trying videostudio pro x5 and it looks very nice, but I have a problem that I think will lead to be a big limitation in the potential this software has, so I guess this is a bug or maybe I am not using it in the right way. I just hope is not that way by design
Anyway, the problem is that when I apply a filter to an animation or to an image (like PNG) that has alpha channel, I can see the filter coverin the whole frame if the clip is in the main video track, while if I move it to the overlay track the filter will only stay inside the picture, for example I've tried this with the lens flare.. please see this image (situation 1 on top and then situation 2 bellow the orange line):
I'd expect the lens flare to go over the transparent area of the clip so that it will be overlaid with the "background" main video track, but it is not. This is just an example but for example the same happens if I apply the lightning filter to a text filter or to a png..
I also have a similar concern with the free TitlerEx plugin that I've downloaded after registering: if I put it on an overlay track I can't just have the text with transparent background overlaid to the main video track.
View 12 Replies
View Related
Nov 1, 2011
one question: is it possible in VS X4 export a video together with a transparent alpha channel (as, for example, a result of a chroma key) ?
View 6 Replies
View Related
Feb 6, 2012
I am using Corel Video Studio Pro x4 Ultimate with SP2 and I getting significantly lower audio volume in left channel for all stereo downmix streams. The problem is consistent regardless if I make an AVCHD video with background music, or create slide show form still images with music.
I want to eliminate any possible PC setup or installation issues and narrow down the problem to program itself. I have attached sample of stereo 1 KHz 0db test tone, which could be used for this test.
1. Open new project
2. Choose Settings --> Enable 5.1 Surround sound and Wide screen 16:9
3. Import to the library few pictures and 1KHz 0dB.wav
4. Place on the time line pictures (I used 5 sec duration for display and 1 sec cross-fade transition)
5. Add 1 KHz 0 dB.wav to the Music track
6. Select Share tab --> Create Video file --> Custom
7. Choose MPEG Transport Stream .m2ts
8. Select Options --> General 1920x1080 --> 29pfs --> upper field first
9 Select Compression --> Quality 100% --> Dolby Digital Audio --> 3/2 (L,C,R,SL, RL) --> 448 kbps --> OK
4. Name the file and save it.
5. Play rendered file on 2 speaker system (TV or PC)
Playing 5.1 surround sound movies on 2 speaker (i.e. stereo) system will likely force to play Stereo downmix stream only from 5.1 sound. You then should be able to observe that the left channel volume is reduced by -14 dB. (at least this is what I get) which causes significant stereo balance shift.The same test can be done with music files, but if you want to measure the volume drop, test tone is the best way to quantify it.
View 5 Replies
View Related
Feb 1, 2012
I have been copying a number of pre-recorded video clips onto a DVD-R disc and playing them on my DVD recorder. As my Panasonic DMR-XW380 DVD recorder only plays DivX or XviD video files I have to convert the files I have to this format.
We have a Sony Bravia 40" TV and I was wondering about the best settings I should use for the Frame Resolution and bitrate etc. When I render anything to DivX with VS I use a Frame Resolution of 720 x 576 and a bitrate of 56kbps and this seems to play okay in my setup. Do you think these settings could be improved?
View 11 Replies
View Related
Jul 26, 2013
I am a screen printer and I print my separations from Photoshop. I routinely work with multi channel files or RGB files with additional spot color channels. I have created actions to place my registration marks, re-size images, etc to get ready to print but I manually have to create the text labels for each screen if they are missing from the original artwork.
The files I work with have channels named as "Base White, Red, Green, 284 Blue" etc indicating the ink color. What i would like to be able to do is click an action that would copy the text from the channel name and insert it into a separate or each/all channels near the top of the file so that when I print each positive it has a corresponding label for ink color.
I am not sure if this is even possible, and I am limited on my knowledge when it comes to actions and have pretty much got lucky in the past getting them to do what I want without unnecessary steps.
On my registration target action it creates a new channel with each individual reg mark then combines them into one separate channel in which I just copy the contents and select all the ink channels and fill with black to make them appear, i'm happy with the steps it takes as it isn't too much trouble and if this could do the same with labels I would be happy with that.
View 1 Replies
View Related
Jan 2, 2014
Just made sure updates for the video card and all the hardware were current and still getting this problem where when I go to adjust a channel of video a random frame from the below channel will insert itself into the clip that I just moved as if it was married into the source footage.
Adobe Premiere Pro
Running an nVidia 660 with 331 drivers installed
Win7 64 bit ultimate
View 1 Replies
View Related
Nov 5, 2011
I have on .avi video file from friend, that I can play OK with sound in VLan player, I just installed X3 and tried to make DVD from it and got it without sound, same thing if I play this loaded .avi in X3, don't have any sound ? Is there any secret encoding I have to look for ? Somebody told me that X3 will eat any format.
I"m running W7 with trial X3?
View 3 Replies
View Related
Dec 10, 2010
I am having a problem with way slow audio in Ulead Videostudio 11.5 plus. I know it's an older version, but the format is similar or the same for some of the programs and maybe someone else has had that issue on even a new software version.
I managed to make some music videos with the software, after going to Youtube, as the manual for the software really isn't that great in all honesty. it simply doesn't tell you much detail on doing things. Putting in a music track to the video clips and then turning the sound on each clip all the way down wasn't a problem, but now that I want to do a normal video-I'm finding the sound in the virtual clip or whatever(which I recorded into my digital camera-mov. files), plays like Jabba the Hut off Starwars!
What do I do here to make it sound normal and be able to edit properly and share it in normal sound?I tried splitting the audio and then it sounded normal, BUT it still had that nasty slow sound on the audio. No matter if you mute it or pull the sound down in the video/audio clips in editing. How do I get rid of that slow sound or change it to make it right? Do I even need to split audio there?
View 2 Replies
View Related
Dec 13, 2010
So I go to edit some video and now all of a sudden there is no sound/audio playback in any of my clips. The files are fine. They play fine in other software, and in other editing software as well. But this is the my software of preference and I can't use it. WHAT THE HELL HAPPENED. The same thing has also happened to my DVD Workshop 2 software. And the same thing happened to at least 3 previous versions of VideoStudio. Everything works great and then one day BAM, no audio. The data is there because if I go ahead and render it again and play the new file on something else the audio is still there. So the problem is only on Corel/Ulead products. As a matter of fact I just downloaded the VS X3 demo. I cannot find anything about it online anywhere. If I cannot figure this out I am NEVER going to buy another Corel/Ulead product again. And I am a longtime user, way back to version 3 or 4. And for some idiotic reason I keep buying the new versions.
View 1 Replies
View Related
Sep 26, 2012
How can I get the channel subassembly to attach to the assembly insertion point at the channel flowline marker? I need the flowline to follow my profile elevations.
View 4 Replies
View Related
Jun 3, 2012
No Audio when capturing in VSX5. Also After I install the application any ac3 file or movie with ac3 audio will not play the audio.
View 8 Replies
View Related
Dec 16, 2010
Slideshow Creation: I'd like to make a slideshow DVD for Xmas to give out. I've made a lot of movies with VS but never a slide show and in fact i've never created a slideshow in any program.
Is this possible in VS10 or would it be better to use DVDLab Pro for this? If VS10 is sufficient to do this (just a fairly basic slideshow NOT HD). I really can't grasp it from the Manual since it really isn't covered in detail there (or did i miss it?) I'm looking to see what types of photos/graphics files and what resolution as well as a HOW TO. I'm clueless about slideshow creation.
Audio DVD Creation:
I do seem to recall that i did this once in VS10 - or was this a dream? Is there any tutorial on this as well?
View 4 Replies
View Related
Jun 8, 2011
When using the audio fade in and out to activate the fade should the bars be highlighted or dimmed? I don't seem to hear any difference between them. (Vid pro x4)
View 2 Replies
View Related
Jul 17, 2012
I got a new camera that outputs .avi files, and put together a video. When I click an individual clip in the timeline and play it, the audio plays... however, when I play the project, the audio does not play. It also does not play when I render it.
View 6 Replies
View Related
Apr 13, 2013
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
View 1 Replies
View Related
Nov 10, 2012
I have VideoStudio X5 Pro. Trying to add voice over using a mike. Problem I am having is the volume. On playback I can barely hear my voice. Have raise the volume level in X5 to the max, still have the issue.
View 1 Replies
View Related
Jan 4, 2011
My PC got a virus and I had to reinstall VideoStudio 11 afterwards.
For the first time since, I've burned a multi-chapter DVD and when I play it there is no audio on Chapters 2-4 but it sounds fine on the menu music and the first chapter. Each chapter is an AVI and plays fine in VS and then in the menu preview.
I've reinstalled the software a couple of times and tried a different DVD+R but still no audio on half of the disc.
View 1 Replies
View Related