'making the highlights'
it says "Control+click on the Menu Text layer in the palette to select its pixels, then click on the New Layer"
problem is I think they're using an older version of photoshop and mentioning shortcut keys. I can't control+click the menu text layer, i want to know how I can 'select the pixels'
If i want to create a rollover so that when the user roll his cursor over a prortion of the normal state he see the complete over state and nothing else,I have no problems in PS7
Roll the cursor over the word love and the transition takes place perfectly.
There is no way I can do this in Photshop CS
Is this possible with the new versions of Photoshop?
I have created a round icon. I want the button to look like it has been pressed in on mouseover. Ideally with a shadow like ring appearing around the whole button. But i cannot seem to put a shadow all around the image only at different angles?
View 3 Replies View Relatedi have an animation playing when i rollover an image and i would like that rollover image to play backwards when the user moves off the image.
is there any way in fireworks or image ready to do this without increasing the file size.
i have on my site 4 circles with 4 images in each circle which all over lap each other and i want to set it up so that when you roll over one of the smaller circles the image loads into the largest circle. i have tried slicing these in image ready and putting roll overs on to the sliced graphics,
View 3 Replies View RelatedI just installed Photoshop CS3, was disappointed to see ImageReady gone.
I updated an old rollover file with new wording and went to save the slices as I had always done in the past - with ImageReady, it would automatically save the file as a standard name (file.gif) and the rollover type (file-over.gif)
I can't figure out how to do this in CS3 without ImageReady. I bought the design premium version so I don't have Fireworks.
how to do this process in PS CS3?
I have made a menu with rollover buttons in ImageReady..
(Mouse over text = a little logo changes)
Every thing works fine when i Preview in Browser..
I can save it as : HTML & Image, Just Image or Just HTML.
My problem is adding it to my homepage.
How should i save it and how do i add it ?
I made a web page in Imageready
Halfway down the page I have three butons on the left
Click button one and the picture in the middle of the screen shows picture 1
Click button two and the picture in the middle of the screen shows picture 2
Click button three and the picture in the middle of the screen shows picture 3
The problem I'm having is that whenever you click on one of these buttons
the screen goes goes to the top.
My rollovers in PS7/Imageready work fine.
When i open the PSD in CS, the slices are still in tact, but the rollovers don't work when i preview the website.
I am working on a layout for a page.
I made another layout successfully using their technique and am now trying a new one, but the rollovers are not saving correctly.
I have numerous slices in my file. When I go to save, I am saving optimized as and then choose HTML. It is only creating the roll over for the first rollover and then ignoring the rest even though all are defined.
If I have a simple button that I created in photoshop, and I make an exact copy of that button except with the opacity taken down a few notches, then I take those two images and turn them into gifs - is this the best way to make a rollover image that looks like it is fading in and out?
When I save as gifs, what happens is the color is either completely opaque or completely invisible...
I don't want to use jpg or bmp because then the background of my image is no longer invisible, it is white.
i can get the image to roll over and do what i want, but when i scroll over it with my mouse instead of remaining the same size it shrinks like 100 fold..
the image i'm using is two poker cards edited to look like a button. i want to roll over and be able to click and go to a destination... i've converted the photoshop file to jpg.. is that correct?
I tried my hand at making a couple of rollovers tests. I followed instructions from a loaned book as well as PS's help section and to cut a longish story short they worked using the explorer button within imageready but when i saved them and added them to my site (made with frontpage) and clicked preview as soon as i hovered the mouse over a script error message came up. Anyone know why this may be happening?
I'm not sure if i've done something wrong in adobe or if frontpage is the problem - though i have used javascripts before successfully in frontpage. The link below shows the attempt i was trying to get to rollover.
I just want a simple, paragraph tutorial. I'll figure the rest out for myself. I understand the rollover pallete but not the slicing that's involved (not even sure if there is any involved) or the [button next to slice in imageready - forget what its called]. Is it best to make all of the icons as seperate shapes in photoshop?
View 3 Replies View RelatedOperating System: Windows Vista Basic
Ram: 1G
Photoshop Version: 7.0
PC: HP 530 Laptop
Basically, I have created a website using photoshop and imageready. However, when I open the web pages in internet explorer or firefox, the rollovers work on the firist page however when i open the rollover link to another page every single rollover stops working. Its not because rollovers are not present on all the other of the web pages because they are. It does not matter which webpage I open first, but whichever one i do, the rollovers work for the first page only.
I created the rollovers by slicing the images and creating individual rollover states for each one.
I also made the rollover states visible on the specified layer, only when the rollovers are scrolled over. I have tried nearly everything and I do not know what to do.
I made my buttons with rollover and I'm trying to put some text on them but everytime I do, the text is always under the button.
View 1 Replies View Relatedi was wondering if you guys have a tutorial on how to do rollovers without having to use java script..i'm in a community website where javascripting is not allowed but i wnat my button to change when people scroll over them ...
View 6 Replies View RelatedI'm trying to figure out how to do the following:
Mouseover a slice -> Change visibility of some layers
When I 'save optimized' ImageReady is saving ALL the slices in the image, not the ones that require updating. So basically if I have N mouseovers, I have N versions of each slice, even though they are identical (with different filenames)
I only want certain slices to be updated during these mouseovers. How can I do this?
I made some rollover image links for my navigation frame of my website. The rollovers work fine. Only issue is when I select the link and quickly move my mouse out of the frame... the rollover stays in the roll over state... Its kind of annoying... how can i remedy this?
View 2 Replies View RelatedI'm trying to create some nice graphics for a company website in CS3. I want to make buttons for links that have special effects when you roll over them with the mouse, click on them, etc. (I'm using Dreamweaver CS3 to put the site together). I have looked for tutorials on how to put the special link buttons together, but they all use ImageReady, which I don't have in Photoshop CS3. Any suggestions for where to go to find a good tutorial, or better still, anybody know how to make these buttons work?
View 2 Replies View RelatedI downloaded a website layout done in Photoshop and was hoping to modify it to fit my own info. At the top it uses a menu bar with blue text. When the site is opened in its html view all text is blue. When a link is clicked that word turns orange. This is not a rollover effect because Imageready does not have a slice with an effect for it. When I try to edit this text something is changed with the properties of it. In the layers window the T to indicate a text box is grey. After I replace the text with my own the T box is it's usual white and the effect no longer works. If you don't understand this explanation Please email me and I will send you a photo of what I am talking about. This is not a rollover effect. how to do it and I don't know why my changing the text to my own deletes the effect.
View 2 Replies View RelatedI created a rollover avatar 50X50 in Image Ready basically by accident but now I think I can do it. How do I save it and send it to a friend? I can preview it in Explorer and I get all this HTML also. What do I do with it!
View 3 Replies View RelatedI have Photoshop CS2 and Macromedia Fireworks 8 but am more comfortable with Fireworks, so I'd prefer to do this in that program. What I want to do is make part of an image a hotspot and set it so when the user rolls over that hotspot, another little image pops up in it's place, possibly with a link. Is this possible with either programs?
View 2 Replies View RelatedMy 2 questions are:
1. What did I do wrong sofar?
2. How do I get my 3 graphics to function as menu/navigation?
I can't get Ctrl + Alt + ~ keyboard short cut to work which selects the highlights in an image. The problem is that on my keyboard I have to press Alt Gr to make ~ so can't use Ctrl + Alt + ~ . How can I change the short cut? I know that you can select the highlights by "Select -> Color Range.. -> Highlights" but the result is not as soft as with the short cut. Are there any other ways to select the highlights?
View 3 Replies View RelatedI have taken a photograph with land in the foreground and sea in the middle and far ground.
I was shooting into the sun and sea has too many highlights on it.
What is the best way of reducing the intensity of these highlights.
In analog photography, various soft focus filters will create a glow in the highlights, without blurring them (a slight loss of contrast, but no loss of resolution). I've tried a duplicate layer, Gauss blur, lighten blend mode.... just got a glowing blur....
View 9 Replies View RelatedIt included the ability to change the amount, the tonal width and the radius, BUT, I cannot find it in my PS 7.
Is this function not available in Photoshop 7?
I can't get Ctrl + Alt + ~ keyboard short cut to work which selects the highlights in an image. The problem is that on my keyboard I have to press Alt Gr to make ~ so can't use Ctrl + Alt + ~ . How can I change the short cut? I know that you can select the highlights by "Select -> Color Range.. -> Highlights" but the result is not as soft as with the short cut. Are there any other ways to select the highlights?
View 5 Replies View RelatedI can't get Ctrl + Alt + ~ keyboard short cut to work which selects the highlights in an image. The problem is that on my keyboard I have to press Alt Gr to make ~ so can't use Ctrl + Alt + ~ . How can I change the short cut? I know that you can select the highlights by "Select -> Color Range.. -> Highlights" but the result is not as soft as with the short cut. Are there any other ways to select the highlights?
View 5 Replies View RelatedI am using a Nikon D200 and Photoshop CS3. I am shooting 1 stop plus/minus and merging to HDR. It seems that the highlights are always getting blown out much more than the middle image. The shadows are brought up fairly well, but the entire upper end of the curve seems blown out with loss of contrast. I have been experimenting with different methods during the 32 to 16 bit conversion to correct it but have not been so pleased with the results. I can get the highlights back down, but the upper end is fairly washed out with loss of contrast. It seems like the middle part of the curve is also pushed up a bit which would account for the loss of upper end contrast.
View 4 Replies View Related