Operating System: Windows Vista Basic
Ram: 1G
Photoshop Version: 7.0
PC: HP 530 Laptop
Basically, I have created a website using photoshop and imageready. However, when I open the web pages in internet explorer or firefox, the rollovers work on the firist page however when i open the rollover link to another page every single rollover stops working. Its not because rollovers are not present on all the other of the web pages because they are. It does not matter which webpage I open first, but whichever one i do, the rollovers work for the first page only.
I created the rollovers by slicing the images and creating individual rollover states for each one.
I also made the rollover states visible on the specified layer, only when the rollovers are scrolled over. I have tried nearly everything and I do not know what to do.
i can get the image to roll over and do what i want, but when i scroll over it with my mouse instead of remaining the same size it shrinks like 100 fold..
the image i'm using is two poker cards edited to look like a button. i want to roll over and be able to click and go to a destination... i've converted the photoshop file to jpg.. is that correct?
I want to have a mouseover and -out effect on my navigation bar and on the event click it should stay in the mouseover status. So far the mouseout and the click event affect each other on a wrong way. The example I attached here is done with plain rectangles, but later they will be images.
If i want to create a rollover so that when the user roll his cursor over a prortion of the normal state he see the complete over state and nothing else,I have no problems in PS7
Roll the cursor over the word love and the transition takes place perfectly.
There is no way I can do this in Photshop CS
Is this possible with the new versions of Photoshop?
I was shooting some images in Raw and I wanted to work with them in HDR. They look good on the computer from light and dark exposure. But when I work with them in CS5 or Lightroom 4 they do not have any different tones, like they are stuck in the middle.
I have created a round icon. I want the button to look like it has been pressed in on mouseover. Ideally with a shadow like ring appearing around the whole button. But i cannot seem to put a shadow all around the image only at different angles?
i have on my site 4 circles with 4 images in each circle which all over lap each other and i want to set it up so that when you roll over one of the smaller circles the image loads into the largest circle. i have tried slicing these in image ready and putting roll overs on to the sliced graphics,
I just installed Photoshop CS3, was disappointed to see ImageReady gone.
I updated an old rollover file with new wording and went to save the slices as I had always done in the past - with ImageReady, it would automatically save the file as a standard name (file.gif) and the rollover type (file-over.gif)
I can't figure out how to do this in CS3 without ImageReady. I bought the design premium version so I don't have Fireworks.
I made another layout successfully using their technique and am now trying a new one, but the rollovers are not saving correctly.
I have numerous slices in my file. When I go to save, I am saving optimized as and then choose HTML. It is only creating the roll over for the first rollover and then ignoring the rest even though all are defined.
If I have a simple button that I created in photoshop, and I make an exact copy of that button except with the opacity taken down a few notches, then I take those two images and turn them into gifs - is this the best way to make a rollover image that looks like it is fading in and out?
When I save as gifs, what happens is the color is either completely opaque or completely invisible...
I don't want to use jpg or bmp because then the background of my image is no longer invisible, it is white.
I tried my hand at making a couple of rollovers tests. I followed instructions from a loaned book as well as PS's help section and to cut a longish story short they worked using the explorer button within imageready but when i saved them and added them to my site (made with frontpage) and clicked preview as soon as i hovered the mouse over a script error message came up. Anyone know why this may be happening?
I'm not sure if i've done something wrong in adobe or if frontpage is the problem - though i have used javascripts before successfully in frontpage. The link below shows the attempt i was trying to get to rollover.
I'm aware that one "should" work in 16 bit and I ALWAYS do for my own stuff but for clients, I'm very frequently limited to 8 bit images because that is all they have to supply. Most civilians just don't know about this stuff.
For instance, I'm doing the graphics for a CD cover right now. Luckily the client knew enough to send me images that were large enough to work with but all of the different source images were in 8 bit. So, I'm now on the home run stretch as far as finishing this job but I have an image that could REALLY use some punching up in the way of curves or levels adjustments. I'm finding that even with what I would consider to be very modest adjustments, the resultant image ends up with a histogram with a whole lot of pretty major holes the entire height of the histogram. Now, I see absolutely no posterization on the screen but I've read that even in that case, it could very well show up in the print.
So, here I sit after doing about 10 hours of work on this project and can't really finish up the last couple minutes of work necessary for good contrast and color without screwing up the histogram. I don't want their prints to possibly be posterized but I also don't want to send them a fairly flat looking image.
I just want a simple, paragraph tutorial. I'll figure the rest out for myself. I understand the rollover pallete but not the slicing that's involved (not even sure if there is any involved) or the [button next to slice in imageready - forget what its called]. Is it best to make all of the icons as seperate shapes in photoshop?
i was wondering if you guys have a tutorial on how to do rollovers without having to use java script..i'm in a community website where javascripting is not allowed but i wnat my button to change when people scroll over them ...
Mouseover a slice -> Change visibility of some layers
When I 'save optimized' ImageReady is saving ALL the slices in the image, not the ones that require updating. So basically if I have N mouseovers, I have N versions of each slice, even though they are identical (with different filenames)
I only want certain slices to be updated during these mouseovers. How can I do this?
it says "Control+click on the Menu Text layer in the palette to select its pixels, then click on the New Layer"
problem is I think they're using an older version of photoshop and mentioning shortcut keys. I can't control+click the menu text layer, i want to know how I can 'select the pixels'
I made some rollover image links for my navigation frame of my website. The rollovers work fine. Only issue is when I select the link and quickly move my mouse out of the frame... the rollover stays in the roll over state... Its kind of annoying... how can i remedy this?
I'm trying to create some nice graphics for a company website in CS3. I want to make buttons for links that have special effects when you roll over them with the mouse, click on them, etc. (I'm using Dreamweaver CS3 to put the site together). I have looked for tutorials on how to put the special link buttons together, but they all use ImageReady, which I don't have in Photoshop CS3. Any suggestions for where to go to find a good tutorial, or better still, anybody know how to make these buttons work?
I downloaded a website layout done in Photoshop and was hoping to modify it to fit my own info. At the top it uses a menu bar with blue text. When the site is opened in its html view all text is blue. When a link is clicked that word turns orange. This is not a rollover effect because Imageready does not have a slice with an effect for it. When I try to edit this text something is changed with the properties of it. In the layers window the T to indicate a text box is grey. After I replace the text with my own the T box is it's usual white and the effect no longer works. If you don't understand this explanation Please email me and I will send you a photo of what I am talking about. This is not a rollover effect. how to do it and I don't know why my changing the text to my own deletes the effect.
Using PSE 11 wanted to have 2 images on the screen to compare them.I hit Window > Images > Tile, and all my open images, about 15, were tiled.From there I was stuck. I don't know how to select the 2 images I want to compare, and I don't know how to get back to displaying just 1 image.I hit Window > Images, but there's no option to do anything with the tiled images.I opened the Photo Bin, right clicked on different thumbnails, but "Minimize" wasn't available.I ended up writing down all my open images and closing the program.It would be nice to be able to select what images are to appear simultaneously on the screen, or at least get back to having a single image.As it is, I don't see the use of Window > Images > Tile unless you just want to look at a cluttered screen before closing the program.
I created a rollover avatar 50X50 in Image Ready basically by accident but now I think I can do it. How do I save it and send it to a friend? I can preview it in Explorer and I get all this HTML also. What do I do with it!
I have Photoshop CS2 and Macromedia Fireworks 8 but am more comfortable with Fireworks, so I'd prefer to do this in that program. What I want to do is make part of an image a hotspot and set it so when the user rolls over that hotspot, another little image pops up in it's place, possibly with a link. Is this possible with either programs?
I am having trouble placing a rollover image onto a Dreamweaver CS6 page. I use Photoshop 7.0 and the program Adobe Image Ready which came with it. I have been successfully placing my animations created in this older Image Ready software onto Dreamweaver pages.
I simply insert the image and the animation plays in live view, preview and on the web. I'm having trouble however placing animations that have rollover effects onto a web page. ImageReady gives me multiple gif files for the slices associated with the rollover instead of just one gif for an animation without rollover, and an html file if I want one. I don't know how to handle the multiple gifs and the html file.
