I've tried working on it 2400mm x 1800mm (300 dpi)Â the image size is too large. 1.6gb? This is for tarpaulin printing. Also what would be the best format if I will save it as flat image? ( PNG,JPG )
Â
The PSB is 4gb.
We have a set of stairs at home that are currently painted white. My wife would like for me to design an image that could be seen clearly from the top of the stairs (such as a tree coming from the basement, etc...) while having another image on the back of the stairs which would be seen from the bottom of the stairs.
Problem : How can I dsign such an image as a one point, I will see both images (when I am at the bottom of the stairs) ? Any ideas ?
I'm trying to design an a4 and a3 poster; and I'm looking for the dimensions to fill in to the canvas sizing tool....
Â
I keep finding the dimensions but I'm confused as to what I am to have the resolution bar/ option set at? I want the posters dpi to be 300 or 400.
Also what size should the file be .mb wise?
i currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
1. How do I connect, collapse and disconnect windows (tool bar, property manager, etc.)? They get stuck together and I can't unstick them. Â
2. What's the difference between canvas size and image size? Â
3. Which tools are only for web design (i.e. tools I can ignore if I'm not doing that)? Â
4. What's the subselection tool do? Â
For Photoshop: Â
1.Why is the original layer always locked?
2. Whats the name of the property inspector in PS? And is it called inspector or manager in FW?
I'm using Photoshop 7. I create a new document 8.5 x 11 inches at 150 pixels per inch.
I draw a circle 1" from the top of the image. The circle is 3" in radius.
When I print the circle is nearly .25" smaller in radius and slightly less than 1" from the top.
Why is the output not in the same placement and proportions as the image on the screen?
I am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies View RelatedIn the new Image>Image Size dialog box, the preview is always at 100% which seems a bit disorienting.Is there a way to set that to default to "fit".
View 6 Replies View RelatedI have CS5.1 on a Macbook Pro.I have an incredibly frustrating problem.   I've seen similar questions, but not an answer that has resolved this for me. I have an image I have sized to fit an 8.5 x 11 inch paper. Canvas and image size all indicate my image is sized at 7.33 x 11 inches. It is at 300 dpi. Print size view indicates full space is utilized on either side….BUT…
Â
When I go to print, I click "scale to fit media" (which is an 8.5 x 11 paper sitting in printer) image prints smaller with a bar on one side. .
When I uncheck STFM,
I get:
scale - 92.67%,
[code]...
I have a created a new PSD that is 8 1/2 x 11.The canvas size is the same 8 1/2 x 11.I want to put a border around the picture (say 1/2 of an inch all around), and put the finished picture in a Picture frame. After it is in the frame, you would be able to see the entire picture plus the border. Q. Should I change (reduce image size) of the PSD to (for this example), 8 x 10 1/2.     Then increase the canvas size to 8 1/2 x 11. After I increased the canvas size, do a Paint Bucket fill with white (to create the White border)? then print the changed size PSD on 8 1/2 x 11 paper so that it will fit into a 8 1/2 x 11 picture frame I realize I could have just created the new PSD to be 8 x 10 1/2 in the first place.
View 5 Replies View Related When I save a file to jpeg the image size in photoshop remains the same as it was as a tiff file BUT according to the information that comes up in windows properties the file is much smaller (300k vs 2.9mg).  Can you advise me which is the correct file size?  If the correct size is the one showing in windows (300K) does mean that the file compressed in JPG and lost a lot of information?
 and if this is the case how can I prevent that from happening and still save the file as a JPG?  [ I would like the image to remain the size photoshop shows it to be] . Thank you very much.
how people go about making skins for forums in Photoshop? Sizes, Any gaps needed for the actual space, and if so, how big etc?
View 2 Replies View RelatedI am in the process of designing a web site and would like to know if anyone knew of a tutorial online I could use to help me with my project?
View 5 Replies View RelatedMy friend has asked me to make tickets for his music gig in my town. I was wondering if I should make this ticket in Photoshop or Illustrator? Also, How big would this ticket be?
View 1 Replies View RelatedI have to design a 2 x 12 ft banner which is giong to be printed on canvas. I was wondering what the document setup would be for something like this. What would the document size be, and at what dpi should I keep the resolution. And are there any color guidelines when designing for something like this.?
View 7 Replies View Relatedcan a watermark stay the same size even when an image size is altered? say if its text and it gets too big when i enlarge the image how do i shrink the watermark ? when it is already merged and flattened as one picture without a separate layer.
such as a php or java script to keep the watermark distinct in a way even in a flattened pic or to select the watermark to erase it and re-apply it in the right font size back onto the resized pic?
Is there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies View Relatedfor a web designer for designing a Mock-up for a web site(page+subpage+specialpage), what from Adobe PS required? eg. Selections, Layers, Slicing, Guides, ... knowledge, well, is it needed anything else? I a reader ADOBE PRESS CIB PS CS6 BOOK.
View 2 Replies View RelatedWhy would you take a layout from Illustrator or Photoshop to InDesign when you can do the entire layout in either of those programs, with crop guides and save the files as a PDF for printing? Is there any reason to not do an entire layout in Photoshop?
View 3 Replies View RelatedI've updated to the latest version of Photoshop that finally gives us retina support.. it does look beautiful but is it about to make our life harder? I design for both web and print and decided to test it out.
Â
I created a standard document 1024x768/72, i was given a tiny canvas on screen, definitely not the size it should be, my understanding is that if i save this and load it on non-retina it will be the correct size?
Â
So, if i want to create the same document, but also the correct size on retina, what should the dimensions be? Do i simply double the pixels, increase the resolution? Am i going to be forced to save all graphics twice?
Â
We're headed down a path that requires adding new steps to our work flow and i'm not quite sure what that is yet.
I need to create a few mockups of an Intranet site for a project, the task can be done in HTML and CSS or using an art package.
Ideally I want to be able to change the colour of text, background colour or maybe border colours throughout the site at the change of a hex value as you would on a stylesheet.
Is it possible to group text/assign styles in Photoshop so that any changes will occur throughout my PSD file, in a similar way to styles in a Word doc?
How do you guys go about making mockups? Art package or CSS and HTML?
I've used illustrator a bit for drawing pictures, but never for web graphics... I need to create some tabs (for the top of a webpage). Maybe illustrator isn't the most common tool for this but it's the one I can use the most.
Anyone know of any tutorials that might be useful (i've not found any) or have any tips for making the tabs look nice (e.g. what effects to use)
I am having trouble with Image/Resize/Image Size in PSE7. In the past I had a document size of 4x6. When I wanted to reduce the # of pixels, I just entered new #s and the document size remained the same. A couple days ago I changed both the document size and canvas size. I cannot get my old settings back. I even uninstalled and reinstalled the program, I also have PSE11 on a trial basis and it also only sees the changed settings. I've tried changing Scale Styles, Constrain Proportions & Resample Image, in addition to changing the Canvas Size but cannot get it to work like it did before I changed the settings.
View 6 Replies View RelatedPS pat files are patterns? how used, applied & imported to PS? How appear Grid lines(eg 960 grid system; how configure?) when designing a mockup with PS cc or cs6?
Â
PS cs6 -to-> PS cc needed uninstall/reinstall... or can use upon update (no uninstall)?
This problem will probably be very simple for a lot of you. Unfortunately, I'm not as adept at Photoshop as I should, or would like to be.
I want to design a postcard for my business, using several photos in a scattered arrangement on the card, with my business name on.
I'm using Elements 5 and have played around with the "create a greeting card" function. It comes close to what I want to do, but it does seem rather basic. As Photoshop always seems have more than one way of doing something, I was wondering if there is more effective way of going about it, buried in Elements somewhere. Or perhaps there is another, (preferably cheap) program that is better at this. One thing I would like to do is to change the background colour on the card and not have to rely on the background templates offered in the special effects palette. Ultimately, I will be getting them professionally printed, so I will need to supply the printer with the art work in the appropriate form.
I'm new to Photoshop and want to design a new baseball jersey for my team. Is there any way of doing this on Photoshop and if so, what plugins will I need? I want to be able to see a picture of a jersey and edit the colors, logo, etc...
View 2 Replies View RelatedI'm interested in using PS to design tool icons for application toolbars. This question really relates to using PS for very small images (say less than 32x32 pixels in size). Are they any tips for working with small images in PS that you can share?
I've tried some dedicated programs like Microangelo but PS has more tools and effects.
I have an upcoming job which requires me to design a series of icons for screen usage (32x32 pixels). I've had plenty of experience designing icons and logos for print, and would appreciate some tips on the method for designing them for screen.
Is the process just a matter of designing the logos in a vector program, importing them into a 72dpi PS file (32x32 pixels), and then optimising the file in Image Ready? (batch process?).
I go through a lot of sketch stages to get to a final picture, and I sometimes print on legal paper. My Brother printer does fine at that with Apple Pages, MSWord, Acrobat, and Illustrator, but with Photoshop there's a problem. I set up a legal-size image in PS, go through all the settings I can find for printing to a non-letter-format sheet, hit print, and what I get is a letter-size patch of image on a legal-size sheet. Clearly, either I am missing something or PS is missing something.
View 3 Replies View RelatedI am interested in designing text similar to the way "urban" is designed in this logo. How would I achieve this?
Â
[URL].........
I need to make some artwork that might be viewed in both RGB and printed with CMYK. I know I can switch the color mode after making the artwork, however, I'm concerned with color shifting when changing from RGB to CMYK or the other way around. How do you design something that you can both print and display on screen without compromising the colors?
View 4 Replies View Related