I have been googling this but can't seem to work out a) if it's possible and b) how to do it.
I have around 200 images of varying sizes that I want to get to a 75 px sq thumbnail. I can make an action resize and save for web but the crop tool is difficult. Could I somehow get the crop tool to start at the top left of each image and restrain the sq by the right side of the image to be cropped?
Is there any way to create an action or keyboard shortcut to set the Crop tool to the front window size in Photoshop CS6? I find that I use that several times a day. I got used to it being the top choice in the Crop tool presets menu.
View 3 Replies View RelatedIn the old days, one could just use the crop tool and, while drawing crop lines, check the perspective box if you found that you needed to change the perspective. With CS6 if you start with the crop tool, and find you want to change the perspective, you have to change tools to the new perspective crop tool. In the process, you have to tell the newly opened dialog box that you don't want to crop, to get to the perspective tool, which now has reset to its defaults. You've lost your cropping and you have to start over.
View 9 Replies View RelatedI am a labtech at a community college and look after 48 mac pros in which the students use the entire creative suite. (I only mention this becuase any answers need to consider variations in system settings or photoshop settings. college students get into everything!)
Â
But the issue is when you select the crop tool and enter a custom constraint and crop
Â
The image size is sometimes a full 2 inches off of what you set as a crop?! I havn't run into this before
[I do know you can use the drop down box and use {size and resolution} but I want to know why it doesnt work under custom and unconstrained]
using the crop tool to highlight a picture and crop the sides?
View 1 Replies View RelatedJust recently upgraded from Photoshop CS5.5 64bit to Photoshop CS6 64 bit. Crashes when using burn tool, crop tool, or dodge tool?
View 2 Replies View Relatedwhen I select the crop tool, my image disappears during the entire crop process. I can only see the image in the preview pane. Why is this happening? I am using the most current version of Lightroom, and I am on a PC.
View 1 Replies View RelatedI am missing a crop tool which can rotate the crop rectangle. Similar to photoshop's tool. I found no way to rotate the crop rectangle in gimp. How do you cut out something from an image if it needs to be rotated while cropping? I tried rotating first then cropping but it does not give me enough precision so I end up with transparent areas at the border.
View 5 Replies View RelatedHow do I set the crop tool in Lightroom to crop only one aspect at a time (e.g. - vertical). Right now all crops do a vertical and horizontal at once.
View 1 Replies View RelatedVista 64bit / Photoshop CS4 Friends - I'm struggling to create an action that will insert a length and width size (3840 x 2160) in the crop dimensions? Simply, I go through the steps to create the action and nothing happens when I try it.
View 7 Replies View Relatedhow to create a simple action, i.e. rotate, crop, etc. What I can't find in a search of the Forum and web is a clear tutorial on how to create an action using text. For example, midway through the action, I want to enter text; however, I don't know how to have the action present the text box for me to select the text/font/color, etc. Each time I use this action, it will be with different text, and if I simply enter the text as part of the original action, that same text appears in all subsequent uses.
When I include a Stop and add text, then begin recording again, it doesn't seem to work either?
I have several thousand images to process. All of them end up being different sizes by the time the different editing steps have been performed.
Is it possible to setup an action that will crop the image 500x500, finding the center of the image prior to the cropping?
I am having a problem with the crop tool. It will not crop the area I want; it goes to a point and stops. It's as if it has a mind of it's own and I can't direct it. I thought it might be the mouse so I took it apart and cleaned it, and then I put a different mouse in. It still does the same thing.
View 3 Replies View RelatedI have images of varying sizes that I need to all be cropped to a specific aspect ratio in the center of the image and extending either to the side edges or the top and bottom depending on using the maximum portion of the image. How do you set up an action to do this.
Â
If I were to do this by hand, I would use the rectangle marquee, change to fixed ratio, and drag from one edge to the other. They move the selection to the center (as best I could) . Then do Image<Crop?
Â
But I need to automate this process and have have it exactly positioned in the center. Can this be automated in an action? If so, how?
Â
FYI, I have CS5 (and CS6). I am comfortable using the image processor. So as long as I have an action set up, I can process all of my images using the image processor. I also have lightroom 4 if there is some way to do it there.
how to create an action or script that could take all images in a folder and crop them to an aspect ratio of 16:9 and then resize them to 640x360?
I can't just change the pixels to 640x360 because that would distort the images as the current aspect ratios are not 16:9.
I have CS5 for Mac. The crop tool from the left vertical tool bar mysteriously disappeared.how to get it back...
View 2 Replies View RelatedHow can I resotre the Crop Tool Icon to the Tool Box? It suddenly disappeared but is still in the Enhance Menu
View 2 Replies View RelatedMy crop tool has vanished from my tool bar. How do I find it and put it back?
View 4 Replies View RelatedI've been using the crop tool without any knowledge of the little boxes you can fill in to restrict its WxH dimensions. I always wanted my crops to come out at a 2:3 ratio and could never get them perfect since I was just eyeballing it.
So then I found the WxH controls and if I put "2 in" for width and "3 in" for height, my image will come out as desired, no scaling of the image, but with the unfortunate side effect that my DPI has been changed, which causes problems for me later on. Now if I put "2 in" x "3 in" and then specify 72dpi in the "resolution" field, it will actually scale my image which is not what I want either. Now if I put "2 px" by "3 px" of course it will massively scale my image, which again is not what I want.
What I want is to re-crop my image to a 2:3 ratio, WITHOUT scaling, AND without modifying DPI. Is this possible with the crop tool? It seems that my WxH numbers are required to have units after them and I don't want any of those units (inches, px, mm, etc). I want unitless cropping, basically cropping by ratio. Does this make any sense?
I have a work-around which involves batch resetting all my DPI's at the end of the session. But that adds another step to my workflow which is not a very elegant solution.
cutting up and manipulating vectors ? I want my script to 1)open from a designated folder 1b) copy and paste 3 instances of the vector object 2)add a rectangle or two , 3) use those rectangles to crop the edges aaand ,4) reflect the images inside those two rectangles 5) perfectly line up the reflected rectangles to their mirrored edge of the third remaining item...?
View 1 Replies View RelatedEver since I upgraded to Photoshop CS6 and started to use the new crop tool, I get this quite interesting visual error and some artifacting.
Â
I didn't have the problem with the crop tool in the previous versions of Photoshop.
I am having recent difficulty with the crop tool in Photoshop CS5. When I crop an image and hit enter it goes to a grey dot and NO IMAGE???  This has never happened before.
View 2 Replies View RelatedThe crop tool does not seem to work in conjunction with a slight rotation. I do not have this issue on my personal computer, only at my place of work, where honestly it's much more important that this function work. The machine I'm on is running XP32 SP3 with 4gb ram, intel proc. Dell machine. Nothing non-standard. I'm using PS CS3 and I believe it's the creative suite package. I know I've used this tool on other machines and at home without issue.       What causes this issue? A two step workaround is not a solution, because the tool does something unique. This is akin to the image size dialogue being broken for me. It's an integral tool and I need it.       The second issue is one that I haven't seen mentioned at all: when using the perspective function of the crop tool, the final image ends up misaligned from the intended crop. For example, if I took an image of a house that was slightly skewed and lined the top and left sides of a crop box with the edges of the house, checked the perspective box, moved the handle in the lower left in to adjust perspective, and then hit enter, the top and left of house will have shifted a large amount away from the top and left of the crop. In effect this gives me a wrong crop. I've never seen this before.       I've tried "ctrl, alt, shift" to reset the prefs and it does indeed reset the prefs, but does not fix the problem. I've tried deleting the prefs files manually in my profile, which does indeed reset the prefs as well,
View 3 Replies View RelatedBut I need to know the steps to using the Crop Tool.
View 3 Replies View Relatedeverytime i go to use it (which is alot of the time) it won't go in 'all' directions.
View 2 Replies View RelatedI used the crop tool to get the smaller size but I tried to use the crop tool to drag over the image but it stopped half size of the image.
View 5 Replies View RelatedWhat I want to do is have the crop tool set at a fixed dimension, WITHOUT resampling let's say I have a picture set to 72ppi, that's 8"x8". And I want the crop tool to be fixed at 150px by 90px, res: 72ppi. What is happening now is, the crop tool is dragging the entire span of the picture, and resampling my selection to the size I specified in the options bar above. I don't want that
What I want to happen is that when I click and drag, only a fixed 150x90px box appears, so that I can't make it any bigger than that...I have done it before....but for some reason I cannot find the option to turn of resampling, or for that matter the options for deleting the cropped out space or hiding it.
I have never had any trouble cropping photos but now I can't seem to make the crop tool work. It has the corner boxes for adjustment but the boxes between the corners that allow me to stretch the selection are gone.
View 8 Replies View RelatedI found out a way to handle and bypass the function so it works like in earlier versions.
1. First step is to change to classic mode (this is done in settings above the image a little "gear")
2. The second step is to change ratio to unconstrained.
Â
The third step is the tip!You know when you want to crop a landscape image of a portrait image and want to go from side to side.The problem was that I started to rotate a crop frame that was there by default... REALLY CRAPPY FEATURE!
Â
3. So here is the tip
Place your cursor is outside the picture Before you begin dragging, hold down shift.
Begin the dragging, then let go of shift, and "tada" the crop frame behaves as it should.
CS6 - Mac OS X 10.7.5. With Crop tool selected and placing cursor outside of crop area to get rotation handles, image is not rotated but crops in pro. How can I get back the rotation facility?
View 4 Replies View Relatedmy crop tool has gone 'pale' on the list under 'image' and won't work. How can I get it back?
View 5 Replies View Related