I managed to figure out the weird new crop tool and cropped my image. Now I want to hit CMD-ALT-SHIFT-S in order to save for web, as I have done in ages past. When I do that, nothing happens.
Prior to cropping, I was able to do this.
Cropping and saving makes my images disappear in CS5 Extended
View 4 Replies View RelatedI have heard of .jpg files and lossy compression. My camera produces 2592x1728 pixel files. I notice that cropping an image and resizing it to fit 15cm x 10cm photo paper results in significant loss of definition. Should it make any difference saving to .png, for example, or is the damage already done because the camera creates a .jpg file instead of a lossless compression file?
View 1 Replies View RelatedI tend to always have a few pictures in rotation that I end up cropping multiple times when I am printing. Pictures where today I need to print a 4x6 and tomorrow it's a 5x7 of the same picture, etc. I am trying to figure out a way to save the file with that cropping. Ideally there would be a way that if I also modified anything else in the image that would also show up in the other versions. I know there is Create Virtual Copy, and that could work if I could then figure out how to change the file name so it would show that it was cropped for 5x7 or whatever.
View 3 Replies View RelatedI'm new to CS6 and I'm having trouble cropping .CR2 files. Basically, I've just found out that I've been editing all of my RAW files as JPGs on CS5, which meant that I've been storing those huge files on my computer, but haven't been using them to their full potential. Now on CS6 I discovered Camera Raw, but I'm a bit confused as to how cropping a .CR2 file works on Camera Raw and on CS6.
If I open my .CR2 on Camera Raw, click 'Open Image' then use the Crop Tool, the image looks incredibly grainy (see below).However, if I open on Camera Raw and crop it there before clicking 'Open Image', it looks fine (see below). Why is that?I'm using a 5184 x 3456 px, ISO 400, 43mm, 0 EV, f/5.6, 1/60 .CR2 file and cropping it to 714 x 516 px. The image doesn't look grainy on Preview.
Also, when I open the .CR2 file on Photoshop, the image looks really dull and lifeless compared to when I see it on iPhoto (see below). Is that because the RAW file is stripped of all settings to give me more flexibility when editing it? If so, is there a way to match the settings that I see on iPhoto?
I am using Photoshop CS5 with all current updates installed on a Mac running Lion. I am having a problem with the handling of the camera raw format (specifically .arw) and how Photoshop handles the format.
My first issue is that upon loading the format into Photoshop, the program is cropping a bit of the image from both the left and the right. I have not found a way to stop this from happening.
Another issue is file size. A client is having issue with the file size presented. They are providing me an ARW file that is 14.8 MB and I am making edits and provided them with a large jpg from photoshop (jpg qaulity turned all the way up) and they are getting a jpg at 9.7 MB. They are concerned that I am giving them a less than quality result.
I know that any conversion from a camera raw format to a high resolution jpg will result in a lower file size and that has been explained however the client has taken the raw format parsed it through Mac Preview, saved it, and resulted in a larger file size than I could provide in Photoshop.
This then becomes a confusing situation to handle.
Questions:
a) How to explain the lower file size happening in Photoshop to the client (what is lost?)
b) Why they can use mac preview and get a larger file size that I can at full resolution jpg in Photoshop?
c) Is there a way I can make this client happy without moving to a tif file format?
d. Why is Photoshop cropping the .arw file?
AutoCAD LT 2012
I had my automatic save set up for every 10 minutes but files were not being saved regularly. I deleted files from the Temp folder thinking it was full and now there are no .sv$ saving at all. How can I make drawings save automatically every 10 minutes?
Background info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
Using Photoshop CS5 -- I saved a Photoshop file I created as a .pdf file but some of the areas on the .pdf file (specifically, sections of text) do not have any of the color/fill information, they are just white (blank areas). I've seen this before when converting other Photoshop files and could not find a work around. I tried saving with various compression levels (max, high, med) and it makes no difference.
View 12 Replies View RelatedIs there a way to automate repetitive actions such as file size and file saving to the same folder?
View 4 Replies View Relatedam having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View RelatedOpen an .AI file saved on a netapp or windows shared directory with full permissions (prior to saving I noted that all security groups are intact in file properties as we have 2 for read and write access)Make any changesTry to save and get the prompt: Can’t save preview, but all other information was saved successfully. The file couldn’t be found. ID = -43 (file is now corrupted and looking in security group file properties the 2 security groups designated for read and write access for the directory is now gone and shows an unknown security group????)
Save as works without a problem. Try to press save again and get This file has been modified outside Illustrator. Do you want to continue?Continue and prompted This file cannot be foundObviously the file preview icon goes from a thumbnail of the file to a generic iconWhen I try to open the file I get: Can’t open the illustration. The file is locked or in use.It led me to believe the issue was either OS X or CS5.5. I was able to open the file fine on Windows Illustrator CS5.5 make a slight change and resaved (which fixed the file and opens again in OS X and read/write security groups show up again?)Optionally, I was also able to fix the file to where I could open it in OS X by simply giving myself Read/Write access to the file from Get Info
Notes:No issues with the same file in 10.7.x.
I've tested on all available Mac Pro / MacBook Pro machines and issue doesn't seem to happen on MacBook Pro retina?Photoshop and InDesign not affected
I'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue.
I recieve this error:
Error in rule: Material, in document: Part6
'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.
It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.
When I bring up n image file from a folder and after I work on it I would like to save in another folder other than from the original download file which is the only choice I seem to get.
Is there way to designate a "default" folder for saving other than having to continually search for the folder I wish to save to?
I saved a symbols file with a few symbols in it.
I then create new .ai files - create some graphics then want to save some of them in the symbols file.
I dont see a way of saving symbols from the .ai file into the already existing symbols file.
Im working in a graphic design class that uses cs5.5 and I just bought cs6. How to save a Photoshop file down to cs5.5 format so my teachers can grade it.
View 1 Replies View RelatedI just noticed that CS6 Help file is available for downloading as a PDF file. So I did that, but there seems to be no way to save the file. File > Save doesn't do anything, surely I don't have to download the 20Mb file each time I want to use it.
View 9 Replies View RelatedUpgraded from CS4: If I open a previously worked tiff file in CS6, and make some changes, instead of being able to click Control-S as before, and have it just save, now it comes up as save as, and I have to click 3 time,s as it asks if I want to overwrite it and have the same compression. And if I just modify and press alt-control-W - which would ask if I wanted to save and if I chose yes, it would just save it, now it would default to save a tiff as a psd instead.
Also if I have a group of images open, that I may or may not modify, and use the alt-ctrl-W to close all when done, with CS4 it would stop on the unmodified image and ask if I want to save it. Now if there are unmodified ones, it asks this, but it doesn't stop to show that image, remaining instead on a different image, so I must look at the file name, which for me is usually just a number and name, that I do not have memorized for each similar image. This is all such a step down in efficiency. Is there some preference to go back to the more sensible way?
I am unable to save or "save as" any file to a cd while in PHotoshop CS3. I get the error message "Program error" I can save the file to the desktop or pictures program, then can save it to a cd. Adobe personnel said it is a windows error. Has anyone had this problem. How was it resolved?
View 4 Replies View RelatedInstalled Photoshop on my new Dell. Can't save files in BMP format.
View 8 Replies View RelatedI'm using Adobe CS3 suite, Mac OS X. I need to know how I can transfer or save as a psd file to jpg.
View 3 Replies View RelatedHow do I save an eps file in Photoshop.
I can't seem to save it so that it is able to be opened in any resolution.
I have trouble with file size, example I design a poster say 120mb and open existing poster 200mb so that i can copy certain images and text from it and even though I delete the second poster before the saving the new poster but the file size becomes 320mb?
So I thought there was something worng with my machine i.e a virus.
I repeated the example above and removed all the images and all background and left the text on the poster and save the final poster with text only but the file size is same i.e. 320mb?
I am setting up photoshop cs4 extended and the default file saving is "tiff". I need it to be 'psd'. How do I do this? I have looked through all the settings and cannot seem to find it.
View 2 Replies View RelatedI'm saving a tiff image from an Imacon scanner before opening in ACR and modifying it.Then, proceeding to Photoshop CS6 for Mac for further modification. On saving it will only save as .pbm and not .tif. If I modify the suffix is shows as .tif.
However, it will then not import into LR4. It will then open in CS5 Photoshop and it also tries to save as a .pbm, but it will easily change to a Tiff suffix and save and then re-open in LR4 as a .tif.
Why is it that when I save a file that has many, many layers to a PDF without layers as a copy that the file size is larger than flattening the layers and then saving the file as a copy to PDF? 19Mb vs. 5Mb?? Wouldn't saving a file without layers be the same as flattening the layers and then saving the file??
View 1 Replies View RelatedPhotoshop cs6 is hanging when tyring to save. Seems to pause at 83% and then takes over a minute to save the file. Computer details below and the system info. Gone back to using cs5.5 for now.
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro5,1
Processor Name: 6-Core Intel Xeon
Processor Speed: 2.66 GHz
Number of Processors: 2
Total Number of Cores: 12
[code]....
I have CS5 and whenever I try saving any file type to PDF it maximizes the file size tremendously. I have flattened the layers so that is not the issue, and it doesnt seem to do it with other file formats, so it makes me think there is a hidden preset that i cant find pertaining to PDF formatting. Example: Opened up a PDF file sized at 3.1M, and saved it without making any changes and it jumped to a size of 10.3M. (I tried doing the same thing in Photoshop 7 and the file stays at the size of 3.1M.)
View 1 Replies View RelatedIs there a way to save an image on Photoshop as an icon file?
View 2 Replies View RelatedBasicly i have made a flyer design for an event im doing, but i can only save the file as a photoshop image...i need to save it as a jpeg.
View 6 Replies View Related1. Is there any point in saving a file as a TIF when it was created as a JPG?
2. Should I be taking all my digital photos as RAW then converting them to TIF or some other format?
3. I assume that the only time I need to save a file as a PSD is when it is still a work in progress and not the final image, correct?
4. How do I know what file formats to use and when?