watching the hourglass spin on another batch (open 1GB file, downsample to 20MB, save as tif) I'm wondering if the use of a RAM drive like the I-ram (4GB PCI SSD or ?) as my primary PS scratch would speed up a process like this. I do a ton of this kind of stuff. Presently I'm using a 35GB 10k Ultra SCSI for scratch. Most of the time is spent on disk grinding as the Task Manager shows about a 7-35% processor hit at any given time and PS scratch remains @ around 1.7GB. Also, would it be faster to include a "purge all" step in a batch like this?
1) I'm unable to designate an internal drive as a scratch disc (non boot drive). Drive is clean, empty, I've chkdsk'd, permissions set to full, I can read and write files on it, and I'm able to designate it as scratch for Illustrator but PS6 doesn't like it. Says I don't have access.
2) I upgraded to PS6 extended (cloud) and after a week it now hangs during startup at loading Nik Color Efex Pro 4 plugin. Hangs for about 3 minutes before continuing.
I intend to acquire ps cs4 andi have a 64 bit machine with 32gb of ram...problem is it would be difficult for me to set up a different scratch disc...how much ram would one need in order to see no benefit from a scratch disc ?
From what I've read, the scratch disk in Photoshop is there so that if you become low on RAM, it will move data from the RAM to the allocated scratch disk...so why bother making that scratch disk the RAM when it'll just be going from the RAM...to the RAM?
I've purchased a Windows 7 PC with 16 MB RAM, 2 terabytes and a 250 GB SSD. I'm going to load Photoshop on the SSD and the OS on the hard drive. Where should the scratch disk go?
Is it possible to use a network drive as a scratch disk? I have very little space left on my only internal drive and don't want to have to purchase a drive just to connect to my PC for a couple projects.
I have an internal expresscard 16 GB flash drive and Photoshop doesn't see it. So I can't select it as a scratch disk. Is there a workaround to get PSCS3 to see this drive? or did I just waste my money?
I just downloaded PS, ID, and Ilus for the Creative Cloud. I also have the CS6 versions. In my CS6 versions, I can see a particular drive that I've set as my primary scratch drive (I have four internal and two external drives); but I cannot see this same drive in the CC versions of PS, ID, Illus.
I just installed Photoshop CS6 on my wife's PC running Windows 7 Professional with all the updates.
In PS preferences I selected her internal D: drive (a non-boot drive), for her scratch disk. Now when I try to start PS it says I need to unlock her scratch file. What that file is called. I DO have adminstrator priviledges I cannot start PS so I can reset mer scratch drive preferences.
Just wondering is it OK to use a External USB 3 500 GB Hard Drive as Scratch Disk. I have USB 3 ports on my PC and have internal hard drive also, but would it be OK to use the external drive as a scratch disk
I have photoshop CS2 on my desktop computer (XP). The hard drive is partitioned and I have photoshop scratch disk on its own partition (10GB).
I have photoshop CS3 on my laptop (Vista Premium, 2GB ram). There is only one hard drive in the laptop. It is already partitioned into three - C drive: windows + programs, S drive: system files, X drive: recovery.
My question is do I keep my scratch drive on the C drive or can/should I partition an external hard drive (250GB) and put my photoshop scratch disk on there? The external drive is via USB.
I have opened Photoshop (7.0) I get a message on the lines of: -
You currently have Photoshop's Primary Scratch & Windows paging file on the same volume which can result in reduced performance.
It recommends that I should set the primary scratch volume to a different Physical Drive. I have looked at my preferences which I havent changed (not intentionally anyway) and the First Choice is set as Startup and the others have nothing set. I only have my C drive and am unsure how to Zone another area for a second choice. Is it as simple as setting a folder somewhere on the drive. (I have 14Gb free).
No one of the used files are bigger than 20MB in file size. When opening the file, my empty hard drive space (40GB of free space) decreases to ZERO. Which temporary file on earth can be 40GB big? My system is an i Mac with 24GB RAM. How can this happen?
EDIT: I just found out this might be the so called scratch-disc. But anyway, how can a file take up this much space? Photoshop has a allocated RAM space of 16GB on my system.
After doing everything i can find to optimize my hardware/software for doing 3D animation in Ps Ext CS6. I still cannot render an animation to video using the Ray Traced Final setting. (Ray Traced Draft, no problem.) The last time I tried (after repairing disk permissions), at least Ps did not crash and give me the same old crash report (Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x00000007a0020000). This time I just got an error msg that my request could not be completed. (Progress?) Checking Activity Monitor, I could see that my available RAM, which was 13 GB when I started the render was now less than 1 GB (761 MB).
So, I have come to the conclusion that my 16 GB of RAM and 300 GB available for virtual memory on my HD is not enough for rendering the type of 3D animation I am trying to do. Would you agree? Also, I have read it is not good to use the same HD your program is installed on for a scratch disk, so I am considering getting an external solid state drive to use as a scratch disk.
Mac OS 10.8.2. PS6 will not launch unless the boot drive is set as the number one option for the scratch disk. Even if I choose another internal drive and set it as the number one option for PS6 it will not launch. My boot drive is only a 120GB SSD so I don't want to use it as the main scratch disk.
I'm unable to point CS6 to the alternate scratch drive despite changes in permissions. I noticed my boot drive (C:) is actually Disk 1, not Disk 0, and my scratch disk (internal) is Disk 0. I can select an external drive (I:) with no issues, but that is a 2TB drive I use for data. So, I'm curious whether the mix-up with the boot disk order has anything to do with CS6 not being able to access the disk I want to designate as the scratch disk?
I recently upgraded to an SSD on my MBP, I bought a caddy and swapped out the optical drive for the original HDD internally. Now, I was hoping to move the scratch disk from the SSD to the original HDD, but the HDD doesn't even show up as an option in the Photoshop preferences. The drive is easily accessible anywhere else, and even accessible through the open/save/etc. menus within Photoshop, so OS X and Photoshop both know the drive is there, but Photoshop just isn't showing it as an option within the Scratch Disk options setting.
using mac os I need to change my scratch disc from the default "system" to an external drive.
In preferences> scratch discs it sees the hard drive i have attached...so i choose it, I click ok and get the usual warning about having to restart illustator to implement the change. problem is, when i quit, then restart illustrator, no dice. it's defaulted back to " system". I change it again. click ok. then, just to see, i re- open the preference panel. it's already gone back to " system". what gives? i've tried over and over and it just wont take.
If I have 4 Scratch disks does photoshop use all scratch simultaneously or does it wait for the first scratch to fill up before it starts to use the next one ?
Using Elements 11 - My photos are taking over my hard-drive and I want to safely transfer all my photos and videos to an external hard-drive. How do I do it without loosing info and/or later having to re-connect thousands of pictures?
I have Photoshop CS5 installed on my C drive. I recently bought an external terra drive and want to move Photoshop to the terra drive, as the C drive is pretty full and it's effecting PS's functionality. Do I have to uninstall and then reinstall on the external drive?
While changing the media drive in Smoke setup via commenting out the current drive isn't a complicated process, I personally would find a more streamlined option useful. Something on the startup screen would be great: select project, user, media drive. When using FW800 drives, I typically try to have a discreet project drive that has everything on there for the current project. With the larger Thunderbolt raids, I am going back a little to the old system of having active storage and archive storage. However, when thunderbolt prices come down, I'll most likely have a separate drive for each project again.
I moved images from my harddrive to an external drive.
I opened Lightroom.
Noticed there was a question mark by the photo folder I needed.
I synchronized the folders. Nada.
I rememebered I moved the images (first line ^^)
I re-imported the images from the external drive into Lightroom.
These images (other than one that was marked previously with a blue label) look completely untouched - completely original files - even though I spent hours working on them.
I am glad the images weren't deleted BUT re-doing 600 images will be a MAJOR FAIL if I can't figure out how to import the images with the settings / developments I did beforehand.
I have about 900 raw files on an external drive. I edited those files using my master catalog using a laptop while still travelling. When I got home, I copied the master catalog from the external drive to the desk top, then opened the master catalog on my desktop. I can see the edited images on the external drive. So far so good.
I want to copy (add) the edited images to my desk top. I tried to export the images as a new catalog and then import it into the desire location on my desktop drive. However, LR5 does not allow that. I get this message: "There is nothing new in the catalog you have selected. All of the catalog's photos are up to date in this catalog." Yes, but the edited images are not on my desktop.....
I also tried to Import from the external drive and then Copy the files to the desktop, but then I lose all of the work done in the develop module and the keywords.
I watched Kost's LR 3 video on merging catalogs, but she dodges the question of how to deal with this issue since the "merge" is within the same catalog.I'm using LR5 with Windows 7.
I'm copying RAW files from a shoot onto my network RAID drive in a per-album folder, from where I then import into a new LR catalog (I'm using LR 4.1) on my Windows laptop for that album.
I'm finding that editing RAW files on a network drive from a wireless laptop is awfully slow (not to mention not being able to continue the work offline somewhere else), so I'd like to cache those files on my speedy SSD drive just until I'm done editing and exporting/publishing that album.
I back up my per-album catalog onto the network folder alongside the RAW files since that's my IT-managed master repository. When I'm done editing, I'd purge the cached files and just keep the catalog previews on my limited capacity SSD.
So, is there a way to tell LR to, for one/all files imported from a location (in my case a network folder), look in an alternate location for the identical files? Since I create per-album catalogs in per-album folders, there wouldn't be filename clashing. Either LR can provide this caching behavior on its own or I'd manually copy files from the network folder to a local folder and tell LR to look there first.
I don't really want to make copies of files into secondary folders within LR since then it's a hassle to merge edits on the cached copy to its master copy (I haven't done this, but I'd imagine so).
I have my LR library and catalog on an external hard drive. I have a new iMac with a 3TB hard drive and I want to move the library and catalog from the external drive to the computer's hard drive. Is this something that can be done with a drag and drop?
I transferred my LR3 files from my WD hard drive to my new Lacie Thunderbolt drive and now I can only get the preview and it says the file is missing. Is there a setting I need to change that I am not aware of?
I am not changing anything in my system. I am using windows 7 and will continue to. No change in elements version (10). how to move my pictures from my computer hard drive to an external hard drive (this will NOT be a back up) but the primary locaton for my pictures. I will keep elements program on my computer and when I want to work on my pictures or download more pictures from my camera I will connect to the external hard drive.
