I'm running a e-Geforce 8400 GS graphics card using dual VGA monitors. How can I select which monitor an image opens in? I want images to open on my calibrated Lacie blue. When images open I have to drag to the orher monitor.
Running XP pro and CS4.
When I use the quick selection tool my monitor starts flickering what do I need to change in my set up.
View 5 Replies View RelatedWhat is the best way to get consistent color from one monitor to another. Is that even possible?
View 6 Replies View RelatedWhy can't I drop a clip in the Program Monitor from the Source Monitor in Premiere? When I try to move a clip from the Source to the Program Monitor, a hand displays with the "circle with a line through it" symbol.
View 2 Replies View RelatedHow can separate Multicam Monitor from Program Monitor? I would like to put Multicam monitor on one monitor and hte Program on another.
View 2 Replies View RelatedI have been continually annoyed, when creating a vector mask-heavy document, with trying to select vector mask points by dragging a rectangle only to find that it instead selects a layer higher up which has a larger vector mask.
The only workaround is to manually select the points of my mask or to drag a rectangle from outside the canvas, meaning I have to zoom out or scroll to the edge - sometimes annoying if I am zoomed in quite far.
I know that the move tool can be set to automatically select a layer, depending on what part of the image is clicked, but why is there not an option to turn this off for vector editing?
If you look closely in the attached picture, there is a spot of light blue on the player's helmet, that looks like a mistake (think it should look like the grass behind it)...though it actually may be part of his helmet.
Regardless, I'd like to take it out. My idea was to select the blue with the quick selection tool, then bring that selection out to the grass, select the grass with that size/shape of selection, copy/paste and then bring the grass selection into the blue part so it looks like grass in what was the blue part.
The problem is I don't seem to be able to move the selection without taking the blue with it (so it's not an empty selection and therefore can't select a piece of the grass.)
I have Photoshop CS5 on a Mac OS 10.7.4 My problem is that when I am using curves or a slider, my selection does not stay in the same place. For example, I chose the number 8 on a slider, after I release my selection it will either go one number after or before my selected number. I have had this problem since I got my computer, December 2011, but it has only recently started to frustrated me because of having to use Photoshop a little more than I usually do.
View 2 Replies View Relatedhow to "drop out" the background from this photo (I have loads to do which are very similar). Thus far I have tried channel selections and the calculations tool + all the normal quick selection tools and I just cant get it to work without spending hours adjusting things. The end effect I need to achieve is a perfect white background without loosing any of the detail if possible. On a side note I have also tried taking the photo on blue, green, black and white backgrounds but due to the number of colours present in the products its just not working for me.
View 5 Replies View RelatedUsing photoshop, how do you make a selection out of a text and expand the selection?
View 4 Replies View RelatedI am trying to cut a person out of a picture with a deatiled background so I am using the quickmask selection and paint brush. I'm done selecting the person and have gone back into normal editing mode. I then inversed the selection created within quickmask to select everything but the person in the background. When I click delete, the background vanishes and the person become opaque.
View 3 Replies View RelatedIf I have mad a selection with say an ellipse marque, of say 100px and now I want to fether that same selection outwards, ie to start the feather 10 px outward of the 100px selection so that the 100th px has a 100% transparency and the 110th px has a transparency of zero,thus making the new selection 110px, how could I go about doing it. With the current feathering of the selection, it feathers only in the marquee already selected, not outward, and you cannot place negative feathering px. I know that there is most likely some sort of a ration where you would expand the selection by a certain amount of px, and then apply a ratio of feathering to it to enalble it to feather outside of the 100px marquee.
View 3 Replies View RelatedWhen I pasted a selection made with the Marquee tool there is a transform grid around the pasted selection. I use a MAC and Photoshop CS6 and would like to deactive a feature for this automatic grid, if there is one.
View 3 Replies View RelatedWhen I select a hatch or polyline or any object with grips for that matter, and hold down shift to select multiple grips on the object or objects and then press my middle mouse button to pan or scroll it to zoom, the grips that I have selected de-select, meaning I have to set up the view so that all the grips I want to move are visible before selecting them.
This is only happening on some drawings (although it is most of them) and only when I use 2012 not 2011. Which system variable it is that has gone screwy that I need to reset? or is it something else?
I have a flexible sub-assembly in my top assembly. Sometiems I'm trying to demonstrate to others how a mechanism in the sub-assembly works using this flexibility feature. It works great, but when I move just one little part of a flexible assembly, Inventor displays the wire-mesh of the entire flexible assembly, because technically the entire assembly is selected, even though I'm only moving one part. It clutters up the screen very badly, detracting from what I'm trying to show.
Is there a way to prevent Inventor from displaying the selection lines? Either only when I'm moving a part in a flexible assembly (which would be great), or to just turn them off completely when I'm presenting like this? I know I can turn off pre-select, but that doesn't work, because once I start moving a part in the flexible assembly, the assembly is "selected" and the wire-mesh displays.
When creating a selection Command using the PromptXXXOptions and PromptXXXResult. The entities are selected on the current view, but once the selection ends the entities return to an unselected state.
Is it possible to leave them in selection mode.
I want to this, because it will be better to use Editor.SelectImplied() instead of saving the last selection object Ids.
I've created a lisp that draws the boltholes of a pipe flanges, using the correct number of holes, at the correct diameter at the correct bolt-hole diameter and then rotates. Everything works seamlessly, when i do just one flange. But I've discovered that fewuently there will be mulitple times when a user will have to perform the command.
So the idea I had was to do the following:
Select all circles with (setq CirclesFirst (ssget "X" (list (cons 0 "CIRCLE"))))
Go through the code to create the new circles.
Select all circles with (setq Circles (ssget "X" (list (cons 0 "CIRCLE"))))
Remove selection set "CirclesFirst" from "Circles".
But what for some reason (command "_.select" Circles "R" CirclesFirst "") does not work.
I would like to view my work as I edit it on my prime monitor on a second monitor in order to get a view of the work as I edit on the prime monitor. Is this possible?
View 2 Replies View RelatedMy ten year old crt is displaying color fluctuations - from calibrated to redish and back again, every few minutes.
I went on line to decide which crt to buy as a replacement and was stunned to find only very low end units offered, I can not find any suitable crt choices.
I need advice as to, are lcd monitors now up to the task for quality editing in Photoshop.
Your expert advice, gained from 1st hand experience will be appreciated.
I've read that the best way to shop for a new LCD is to test out each model 1st - even though I live on the border of Chicago (Evanston), I don't think there is any outlet available where this can be done.
I've also read that LCD makers use differing conditions and benchmarks to rate their contrast ratios.
I'm working on a graphic for a Flash presentation. I've been working in Windows RGB proof setup. Then I realized that when I save as a JPG, it changes color. I spent a lot of time getting the colors on this abstract piece perfect, and don't relish the thought of having to go it again using the Monitor proof setup. Is there a way to convert the way the colors look in Windows Proof to be the same as it looks in Monitor RBG proof?
View 3 Replies View RelatedI have calibrated my monitor with Colorvision Spyder2. Why does Monitor
RGB in Working Spaces in Color Settings dialog indicate sRGB IEC61966-2.1
as profile for my monitor instead of the profile created by Colorvision?
Does this mean that Photoshop ignores the Colorvision profile and uses
its default (sRGB?) instead?
Iam using CS3 and WinXP home.
Right after one makes a selection, say by using the Rectangle SelectTool, is presented with handles that allow altering the selection.
If one then selects another tool without deselecting is being deprivedof these handles while the selection remains active thus rendering himunable to alter the selection in that fashion.
Thus forming my question: is there a way to make these handles to(re-)appear on a non-freshly created selection?
I am using Revit Arch 2011 and it is more natural for me to use shift to add to a selection and control to subtract from a selection. Can this be changed and how?
View 1 Replies View RelatedI have been having a problem using photoshop on the second monitor connected to my mac.Here i have put photoshop between the two monitors to show the issue.Here is how my mac screen looks and this is how my second monitor [LG] looks
I have checked all the plugs and no other programs have this problem.I have photoshop CS6 and up until just over a week ago it was working perfectly fine on both monitors.
I am using Photoshop CS4 and I just upgraded to Mavericks. When I opened PS I discovered that all the palettes that normally reside on a second monitor are now all on the same monitor with my PS document and I can’t drag them to the second monitor. It seems that PS does not recognize there is a second monitor there. I can drag documents and palettes from other applications onto this monitor so it appears to be only a PS issue.
View 2 Replies View RelatedThere is an vast amount of information on this topic, that topic being LCD monitor calibration. Some LCD have presets, theater, games, etc. I want to calibrate my LCD so that if someone else is viewing my work on their monitor and they complain it is too light or to dark, I can say it is your monitor.
One of my LCD has two presets that are of interest 'standard' & 'sRGB' my other LCD doesn't have any presets. What is the best or near best calibration I can manually set both monitors too, if this is even possible on LCD.
I have a CS3 version on two computers. The color is way off on one although the monitor is calibrated. I have cross checked the preferences against each one, but can not find a difference. How to fix?
View 1 Replies View RelatedI've been running CS6 on my laptop for the past month with no issues regarding lag.
Today I decided to start using an old monitor as a second display, but whenever it's plugged in there is a huge amount of lag within Photoshop - so much lag that it is pretty much unusable.
From what I can tell, most other programs run fine with this setup (I've tried Sai and After Effects, and both are lag free).
I've tried searching this issue - and there's a lot about configuring refresh rates on the individual monitors so they're the same. Tried that - makes no difference.
Any settings within Photoshop I could tweak to make it run better?
i use led wide screen monitor but it's show wide and when i want to use photoshop i must change monitor resolution to 1920 * 1080 this is good & show everythin normal but this is very small if it's possible which resolution can i use that show normal & good for photoshop & other editing software
View 1 Replies View RelatedI am a photographer and I'm in the market for a IPS touch monitor. URL....and I own photoshop cs6. I would like to use a stylus pen to edit photos rather than a mouse but I have not been able to find any info online about how well photoshop works with a touch screen.
View 1 Replies View RelatedI have a 146 gig hard drive with 3 gigs of ram. Im currently using PS10 as part of CS3 to finish a job and will then be loading CS4 with the new Photoshop, which I have. I tried Vista Ultimate and after nearly cracking up, went back to XP Pro SP3. I had a Nec Multisynch CRT and decided to go for a new LCD monitora Lacie 320, which Im most unhappy with.
The problem is screen resolution. According to the Lacie specs, monitors should be set at 1600 x 1200. At that resolution, Photoshop as well as the rest of the CS, and the visuals that I create in PS, are all minuscule, and my three websites look stupid. I called Lacie tech support, and they said that I could go down to 1400 x 1050 but no further without distortion.
There are three problems: 1) Even with adjustments in XP, I still have to keep my nose to the screen at 1400 x 1050 to see PS menus, read PS help etc., and would like the resolution to be at 1024 x 768; 2) indeed, 48+ % of computer users have monitors set at 1024 x 768 or lower and will have the pleasure of seeing what I cannot see and would like to see; 3) 38 % of computer users have monitors set at 1920 x 1200 and will see my work as postage stamps,