Photoshop :: How To Add 30 Years To Someones Appearance?
Nov 3, 2005how to take a picture of someone who is 30, and make them look 60... adding wrinkles.. age spots etc.
View 8 Replies
ADVERTISEMENT
Photoshop :: How To Put Someones Face Onto Another Persons Face
Jan 31, 2005how to put someones face onto another persons face.
View 3 Replies View RelatedPhotoshop :: Looking For A Glossy Appearance
Jun 5, 2008Is there any filter, or technique that would take a PS picture and give it a glossy look? Something like as if the picture were printed on high gloss paper.
View 1 Replies View RelatedPhotoshop :: Appearance Of Panels In Workspace
Nov 24, 2013The panels windows take up so much space on screen. It's mainly the width of the panel. I'm constantly having to move the panels over and back in forth in order to see what I'm doing.
Here's what it looks like.... Nearly 1/3 of the workspace is taken up. Is there any way to make the panel thinner?
Photoshop :: Remove Chrome Appearance
Apr 16, 2007i would like to powder coat a majority of the chrome plated items on my vehicle, however prior to doing so, i'd like to get an idea of what it will look like. i've seen it done before, but i don't know exactly how to do it in photoshop. if anyone has advice, tutorial, and etc. that will remove the chrome from a photo,
View 1 Replies View RelatedPhotoshop :: CS6 - Image Resolution And Appearance Across Devices
Sep 27, 2012I used CS6 standard. Why have some images have soft edges under retina (iPad 3) but sharp on a screen (non-retina)? Does this mean I will have to rework all my images to work with retina display? As most of my images are 72dpi, not sure if this relevant or not?
View 11 Replies View RelatedPhotoshop :: CS6 Layer Comps Not Saving Appearance Of Layers?
Mar 14, 2013There is a bug in CS6 layer comps that does not save the appearance of layers which have had their layer style cleared.
Steps to recreate.
1. Create a black square in a new photoshop document.
2. Create a layer style on the black square and set the over layer color to red.
3. Create a layer comp and turn on "Appearance" tracking, then update the layer comp.
4. Clear the layer style for the square, it should now be black again.
5. Create a second layer comp also with "Appearance" tracking on, and update it.
6. Go back and forth between the layer comps, the layer should turn from red to black, and the layer style should disappear and reappear on the layer, in the layers panel.
7. Save and close the file.
8. Re-open the file
9. Go back and forth through the layer comps, both will show a red square. The layer style never gets cleared.
Photoshop :: How To Save A Document That Has Adjustment Layers Without Changing The Appearance
Nov 16, 2013Basically I am making a new pattern of stars, so I created a 1000 by 1000 document, filled with black, added noise, then added an adjustment layer to thin out the noise and make it look like stars in space. It looks great!
How to save it without the effect changing. I tried flattening the image, and it messed up how I wanted it to look. I tried merging visible, that didn't work. I tried just saving it as a PNG, like I do with all my projects, but that didn't work. And defining a pattern did the exact same thing. I just want to have what I physically see on the screen save as is so I can use it with other things.
Lightroom :: Change The Appearance Of 3?
Jun 16, 2012How can I change the appearance of Lightroom3. It is black and white lettering. I would like almost anything else. This is one of the great failings of Adobe. My old eyes need better contrasts.
View 2 Replies View RelatedRevit :: Custom Materials Appearance?
May 9, 2012I'm working on a 3-D rendering of an interior view for a client presentation. I need to create a custom material appearance for the carpet and paint to show exactly what the room is going to look like with the clients finish selections. I know there was a way to create custome materials and assign them custom appearance jpg and/or png images in Revit Architecture 2010. Is there a way to do the same thing in 2012?
View 1 Replies View RelatedAutoCAD .NET :: Adjust Appearance Of Tabs?
Jan 1, 2014Appreance of the ToolBox and Form file , so the problem is that they are in tabs and not side by side with each other as shown in the following image .
So how to adjust the apperance of them to become side by side and avoid pressing each tab to move from form to Toolbox ?
AutoCad :: How To Change Appearance Of Nodes
Apr 11, 2007usually when I use the 'divide' command I can leave the nodes on the drawing as they are only dots which appear hidden within the line by the time I'm printing, but this system is set up to plonk huge great crosses on the drawing
I've tried the help menu and had a quick search on here but cannot find where to alter the settings for node appearance
AutoCad 2D :: How To Control Appearance Of Dimensions
Jul 23, 2013I am trying to dimension a drawing and I get some strange results
Bad Dimensions.jpg
How do I control:
1. the size of the arrowheads;
2. the size of the text;
3. how the dimensioning lines contact the object being dimensioned;
4. etc.
Illustrator :: Duplicating And Reapplying Appearance?
Sep 30, 2012I want to create different gradients and effects on a shape and somehow copy them in the appearance panel and then reapply those gradients and effects on other shapes.
View 4 Replies View RelatedIllustrator :: Freezing And Appearance Not Working?
May 28, 2012 For some reason to time I need Illustrator to be perfect and it fails on me ON EXAM WEEK.
I used it yesterday perfect for a good 3-4 hour session. I get on today and I notice that clicking on my groups and paths freezes it for around 5 seconds then works again. Isolation mode also takes a while to go in and then come out and when I minimize it it takes longer to open back up again (10 seconds).
That is also not the only problem
I'm trying to copy the appearance from one group to another by dragging the swatch in the appearance panel. When I apply it to an object that object turns invisble but I can still see the path it just has no fill or stroke
Illustrator :: Expand Appearance Of Multiply?
Sep 14, 2012I have a question about expanding appearance and multiply. I work in print-on-demand, and one of the limitations is that we can not use multiply on artwork. In order to achieve a similar appearance, when I receive these kinds of files, I flatten transparency, and that will sear in the way the multiply effect is interacting with the other elements of the same art file. (in the example below there are no interacting elements) However, if it is intended to interact with the background, I have to fiddle with the cmyk values (adding k) and opacity level until it is as close as possible. It is time-consuming.
we use 'expand appearnce' instead, and I tried it once and it worked! It did all the legwork for me; it spit out a different cmyk value and opacity level that mimics the effect of multiply, so I don't have to calculate it manually. However, I can't get it to work again. Illustrator thinks it is already its simplest form of appearance and will not expand it further. I've tried adding another effect and expanding but it will only expand the effect and keep the multiply.
Maybe she and I were both tripping when we thought it worked once? how to expand the appearance of multiply? Here's a picture of the 3 methods I'm speaking to: on the left is multiply, the center is flattened transparency, and the right is achieving a similar effect of multiply with opacity & color build.
InDesign :: CS6 - Appearance Of Blues Are Desaturated
Feb 27, 2014All bright, vibrant blues are appearing as muddy and desaturated. I've changed the transparency blend space, the color settings, and did everything else I could think of including restarting the program.I've looked everywhere for a solution to this, but the only thing I found suggested changing the transparency blend space...which I tried several times.
View 5 Replies View RelatedAutoCAD Inventor :: Add Appearance Tab To IPart Table?
May 31, 2013Is it possible to add a Appearance tab to a Ipart table? I am cataloging a set of parts and one part is made with steel but in Gloss - Black and Matte - Black and i'd like to differentiate the 2 without haveing to make 2 seperate Ipart files.
View 2 Replies View RelatedAutoCAD 2010 :: Same Linetype And Scale But Different Appearance
Dec 13, 2011Same linetype and linetype scale but different appearance!
I got the linetype Dot2 with linetype scale 0.02
The linetype Dot2 with 0.02 linetype scale appears in two different ways!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Inventor :: Glass Appearance Not Transparent
Aug 24, 2012I'm having trouble finding or creating an 'appearance' that actually looks like glass. Each of the appearances in the Inventor library and Autodesk libraries are milky and not very transparent at all. I'd like to find or create a material that is almost 100% clear, but reflects the environment.
The transparency slider scales from 0-100% but the results are more like 0-75%.Inventor Studio looks just as bad.I've got to believe that it's not impossible to do without Showcase or 3DS Max.
AutoCAD Inventor :: Appearance / Colors Looks Strange
Jan 10, 2014I need to do a ray-traced rendering of a smooth black anodized surface.
However when using the "Anodized Black" appearance, I get a speckled surface when using ray trace, and the part looks like galvanized steel.
AutoCAD Inventor :: Translucent Parts In Appearance
Nov 12, 2013In Inventor LT, it would be very useful if some of my parts were translucent in appearance. I have changed the "feature appearance" of the extrusion to Polycarbonate Clear" but it's still at the default grey.
View 5 Replies View RelatedAutoCAD Inventor :: Autodesk Appearance Library
Dec 7, 2012How to set Autodesk Appearance Library as default using API
View 2 Replies View RelatedAutoCAD Inventor :: Missing Appearance Asset
Jul 15, 2013I created a host of materials with a certain appearance etc and saved them as a library. When I open my Inventor 2013 this morning I seemed to have lost my appearances. It says my materials are missing the Appearance asset - see attached screenshot.
What is this, and how can I rectify the problem?
AutoCAD Inventor :: Wrapping An Appearance To A Sphere
Oct 6, 2012I've been attempting to create a sphere with an Earth texture, for which I've made a custom appearance with a flattened picture of earth. Instead of wrapping to the sphere, however, the image is mirrored on both sides of the sphere and extremely distorted. I knew wrapping 2D geometry to a sphere was not strictly possible, but is there no way to pull it off with an image?
If not, would something like this be possible in 3DS max?
Revit :: Change Appearance Of Imported Mass
Aug 22, 2011Is there any way to change the appearance of a mass imported into Revit? I simply want to change the dark grey that shows in the rendered view and/or the white that shows up in the shaded view so I can control how background buildings (imported through google earth/sketch up) look in my drawings.
I do not want to rebuild the masses with walls, ceilings, etc, because they are just background site elements. I have tried to do this through object styles. I have tried to do this through "Override by Element" and "Override by Category". I am importing the files as in-place masses and there is no way to edit materials because "Materials" doesn't even show up as one of the element properties.
AutoCAD Architecture :: Color Pencil Appearance
Feb 10, 2012I have created a 30 page 8.5 x11 booklet, using Architecture 2012, for a campus mater plan. Now our priciples want to see it in a hand sketch format. I can do the lines with the visual style sketchy but how do I get the solid hatch colors to look like color pencil? I am assuming I will need to use Photoshop but just wondering if there is something I can do in Autocad Architecture.
View 9 Replies View RelatedAutoCAD .NET :: Adjusting Appearance Of Leader Drawn
Oct 12, 2011Using some slightly modified code from the samples provided by Autodesk as shown below I'm attempting to draw a simple leader with MText annotation.
In the attached bitmap the top leader shows the result of running the code and the bottom one the appearance I want which is obtained by changing the AutoCAD properties of the leader under
Text
Text pos vert
from 'Above' to 'Centered'
I can't identify anything in the API which allows me to draw with this change, but feel it should be there. Searching the web for code to draw leaders, basically only returns minor variations on this code with only the same functionality.
<CommandMethod("TDD")> _ Public Sub TestDrawLeader()DrawLeader("Here it is", New Point3d(0, 0, 0), New Point3d(15, 5, 0)) End Sub ' AddLeaderAnnotation ''' <summary> ''' Called from: AddLeaderAnnotation ''' </summary> ''' <returns></returns> ''' <remarks></remarks> Function DrawLeader(ByVal spText As String, ByVal pPtStart As Point3d, ByVal pPtEnd As Point3d) As BooleanDim acDoc As Document.
[code]....
AutoCAD Inventor :: Extrusion 3 With Glass Appearance
May 22, 2013How can i have extrusion 3 with the Glass appearance or clear so as to look like Glass ?
View 2 Replies View RelatedAutoCAD Inventor :: Can't Clear Appearance Override In IAM?
Mar 6, 2013I am clearing an override of a part in a subassembly. I tried to use the clear appearance button but I get message saying Active Design View has no appearance overrides which is not true. You can see in my attachment there clearly is an override from Chrome-Polished in the IPT to Satin- Brushed in the IAM.
There is no "Clear Override" in the Appearance pull down. I think I used to be able to click on color As Part in previous Inventor version but now it's different. The black areas are embossed features representing silkscreened graphics I need to preserve.
I tried to post the files in Inventor/Customer Files NG but the "new message" button was grayed out & not working.
AutoCAD Inventor :: Ral Colors Appearance In 2013?
Jan 7, 2013I have an xml file with RAL colors I used befor the new appearance was added in Inventor. Now I want to use ral colors in Inventor 2013 but that I can not manage. how I can add ral colors and also properly be given in my parts.
View 1 Replies View Related