when I attempt to add a speech bubble to my picture the original Background corrupts.
I always make a copy of the background to work on, and I make the Original background un-visible to protect it.
Is it possible to put a speech bubble on a layer for use as a popup? In this case it would be a layer on a layer. I can draw a graph and I can import a jpg, but can't get the speech bubble on a layer.
View 5 Replies View RelatedI use a nice plugin for making speech bubbles and wondered if there was one that enabled the 'thinking' bubble too.
Its something that has been very useful, and the 'thinking' bubble, would be great as it is not an option in the plugin I have been using up to now.
What technique should I use to make the edge of a video reel border the speech bubble, like in the attached sketch. I've already traced the speech bubble and the exclaimation mark.
View 1 Replies View RelatedIt happened a couple months ago, but I thought it was a bug, and now it's happened again, and now it's corrupting my original files.
Here's what's happening, at least my actions thus far. Lightroom 4 worked fine and dandy. No issues whatsoever. We then upgraded to LR5.
Now, as I'm going in Library tab through images as it's seems to be pulling up an image it shows up with jagged edges and just looks -- corrupted. So then I look at the file in Finder and now that image can't be opened up in Photoshop, Preview or any other application. For some reason LR's previews are corrupting the ACTUAL, ORIGINAL images.
Now back a month ago, it happened when it wasn't a big deal, I had the RAW original files backed up, but now, now it's corrupted at least two folders and the original RAW files can't be opened. Here's the summary:
-- As for corrupt cameras/disks -- I have files from Hasselblaad and from Canon doing this. I have many different cards that were used in this.
-- It's only when I opened up in Lighroom 5. Otherwise files were fine. JPEG conversions that were made from these images weeks ago were fine.
-- It's happening to one out of every 5 pictures or so. Which is A LOT OF PICTURES TO BE CORRUPTED.
For the ones that I have backed up, now I have to go figure out which....rename them...etc. AND HOPE AND PRAY this doesn't happen again.
-- It says it can't open the file.
And then when I go to finder, through lightroom, to RAW image it doesn't work to even bring it in Photoshop.
SO it's corrupting my files so that Photoshop can't recognize them. NOT all photos are being affected, just the folders I go to in Lighroom. Any other files in lightroom (from same day/camera) are okay.
I want my leader line to always have an 'invisible extension' that goes through the centre of the bubble (unlike the attached image)
how do I do this?
How do I add speech bubbles on Photoshop 10
View 1 Replies View RelatedI have recently began using Windows 7 speech recognition with my Photoshop elements 10 software. It works wonderful. Now that I have all of my "routine" tasks with verbal commands I can focus on what I am drawing rather than spending much time clicking menus and tapping keys :-) I would like to expand my verbal commands to be able to set the options in all of the "option tools menus" and it would be great to pick items from the drop-down menus.
View 1 Replies View RelatedWhere do I find a word bubble?
View 3 Replies View RelatedWhen you select the option to apply any changes & overwrite your original photo does the program attempt to try to a default setting to keep the picture approximately the same size as it was before? (assuming that you haven't cropped it) If it doesn't default to a size automatically can is there an option to do so?
View 4 Replies View RelatedMy photos are printing out much darker than what is on the monitor display. I have calibrated the monitor and changed the color profile, color management & color space numerous times and they I cannot see any difference in the prints. I've changed the printer settings, still too dark. I have edited the photos and brightened them, still much darker than on the display. I'm using Photoshop Elements 10 with a new monitor and computer. My old computer and Adobe Photoshop CS2 program did not have this problem.
View 5 Replies View RelatedI upraded elements 10 online. I need to uninstall it (as I keep getting message that its incomplete or missing some elements, as shown in screen shots) and then reinstall but since I don't have a disc can I do that? How do I go about this?
View 5 Replies View RelatedCan't transfer clone on PSE10. Worked OK until a week ago. What are Possibiities
View 1 Replies View RelatedIs Photoshop Elements 10 compatible with the new Windows 8 operating system? Microsoft now has an inexpensive Windows 8 upgrade path for laptop and desktop running Windows operating systems.
View 5 Replies View RelatedHow can I compare photos side by side to determine which ones to keep?
View 1 Replies View RelatedWill start using lasso tool and then the picture will flicker and the lassoo tool will not function to continue with the selection. Has worked ok in the past but not now. Have tried reset tool but did"t work out problem. Why the flicker of the picture as this through the alignment of the lassoo off and you cannot continue with the outline.
View 6 Replies View RelatedI have my LR4 settings correct, when I click edit in PSE10, PSE10 opens but no photo transfers over with it
View 2 Replies View RelatedI have created my photography logo using a stamp in Elements 10. I create it and then hit define stamp. I can close out Elements and open it back up and its still there. However, the moment I have to use a different brush, I lose the stamp I created.
View 4 Replies View RelatedI have Photoshop Elements 10 on my Mac and my PC. I have several catalogs on an external harddrive with older photos. I have tried to get my Elements on my Mac to read those catologs. However, it gives me a message that the catologs are in a older format and need to be upgraded or damaged and need to be repaired. I ran the repair utiity on the catologs using Elements on my PC and it found nothing wrong. My PC version can open the files without any issues. Both versions of Elements are the exact same. I installed them both the same day from the same CD set (Elements 10 came with both PC and Mac versions).
View 27 Replies View RelatedI need to know the area in the elements 10 that I can change a photo into a water color looking photo?
View 1 Replies View RelatedNB: I'm using the word 'register' in the printer's sense, i.e 'correctly aligned'.
I frequently edit multi-layered maps, in which each layer must be precisely registered (to the exact pixel) with the canvas. In older versions of PSE, when I've wanted to import layers from another file, I would turn off 'Maximise' mode in the Window menu, and drag the imported layers from one image onto the other. By pressing the SHIFT key at the same time, the new layers would be precisely registered on the new canvas in the same relative position they were on the old canvas (if the images were different sizes, the old canvas would be centred on the new one).
In PSE10 there is no 'Maximise'mode, so I use the 2-up option in the Arrange menu. However, pressing the SHIFT key doesn't seem to work any more, and the new layers don't come up in their original position. Apart from manually lining up the layers, I can't find a way to register them. The various 'Align' options aren't useful for this, as they re-calculate the centre of the layer based on its content. I need the layer to be aligned as it was on the old canvas, whatever the content of the layer.
I'm using Adobe Photoshop Elements Version 10 and I cannot print anything either directly from it, or even anything created out of it to my HP Officejet 5610 series printer. I am not having the same issue that others have reported with the Fax Window coming up, nothing prints at all. It doesn't even go into the Print Queue. I have been discussing (on a forum) with HP and they have suggested using the Deskjet 990C driver. I tried that and still nothing happens. I can print to a Canon Pixma with no issue, it's definitely something with this printer/print driver. I tried renaming the printer to make it shorter, I have tried completely deleting and reinstalling the printer (using HP Cleanup utility), I have updated drivers, tried using the 5610 as well as the 450C and 990C.
This is happening directly out of PSE as well as anything I create and save - so making it a PDF, it won't print. Making it a JPG, it won't print. I can print PDF files not created in PSE with no issue. I can print JPGs not created by PSE with no issue.
Moved some catalog keywords but do not know where. How can I locate them. I know their names from below each photo.
View 2 Replies View RelatedToday i went to copy and then paste an image onto another one,i could not use the copy or paste function(in pse 10). Only the paste function was usable and when i hit it it pasted the picture of an eagle onto the image. This eagle i had copied from a particular website(unrelated to photoshop) amd pasted it to a folder in windows live photo gallery. I tried deleting this eagle from the windows gallery,but still i could paste the eagle onto the other picture. And it created another layer with the picture of the eagle. Also as usual my lassoo tool is malfunctioning in pse 10? Maybe uninstalling and re-installing pse 10 would solve the problem.
View 3 Replies View RelatedI've tried to resize images after reloading my Photoshop but, whatever I do and whatever size I do, the original remains the same.
View 1 Replies View RelatedI have several images in my project bin, then use the Arrange icon to divide the workspace into "2 up."
There are now two images side by side.
Over the left one are several tabs, although not one for every image (they don't all fit).
Over the right one is a single tab, with the name of the open image.
How do I change which image is shown on the right?
I can change the left one by selecting the left image then double-clicking on the image I want in the project bin.If I try the same on the right, the image I double-click on goes into the left side of the window.I can't pick from tabs, because there aren't any (other than the currently open one) over the right window.
I am using PSE10 with Windows 7. I've looked at the on-line documentation and tutorials, and they don't go into details about controlling the division of the windows.
Would it be possible to update the PSE10 Raw to level ACR 7.2 to use the RAW from Sony RX100
View 2 Replies View Related take jpg + RAW pics with my DSLR, for the most part the jpgs come out fine but now and again I like to tinker with the RAW's. So I like to keep both incase I'm inclined to tinker in the future.
To keep my photo catalogue looking neat and tidy I stack the jpg and RAW so only the single image shows. I can obviously select both images and the select stack, or I can select a whole load of images and select auto stack which then suggests stacks based on photo likeness. This is OK sometimes, but often many images are of the same subject and I don't want 10 stacked, just the 2 same files in jpg + RAW. Is there a way to automatically stack the same file number jpg + RAW?
Is their any way that I can get PSE10 ACR to recognise NEF files from a Nikon D600, apart from changing the format to DNG?
View 1 Replies View RelatedJust started elements up and all my files appeared, most of which i didnt want to open.
View 3 Replies View RelatedPSE 10 & Lightroom 5...I import my photos to PSE10 organizer & use the editor for some corrections. I purchased Lightroom 5 because of its ease of exposure correction. I Imported the PSE 10 catalog to LR and make the exposure corrections. How do I get the corrections back to PSE?
View 2 Replies View Related