When I move a photo from the ORGANIZER to EDITING (in Elements 10) the image looks different (color, contrast etc.) This has stopped me from ubgrading at this stage.
View 5 RepliesI'm using Elements 11 and cannot see how to edit Tags in Organizer.
View 7 Replies View RelatedI've been trying to get Adobe Photoshop Elements software to work on my computer since mid December. I've had alot of responses to different options, even from Adobe themselves, and nothing is working. I get the Welcome Menu screen but when I click on either Organizer or Edit nothing happens. I am the administrator on my home computer and tried launching as administrator but nothing works. I've tried launching it from "Program File" exe but nothing. When I do this I get this error message;
"Windows cannot find 'C:Program Files (x86)AdobePhotoshop Elements12PhotoshopElementsEditor.exe'. Make sure you typed the name correctly, and then try again."
I've tried a Install Photoshop Elements in a simplified mode, nothing. I've shut down my firewall and virus program and then install, nothing. Looks like I've stooped everyone. Now I can't even return it because the package is open.
My computer is a 64-bit Operating System, Intel (R) Core i7 CPU, 869 @ 2.80GHz, Windows 7 Professional.
When I open an image in 'edit', the reds become much more saturated than when it was viewed in the organizer. The amount of red saturation is abnormal and the photo remains this way afterwards, even when viewed in the organizer or opened with other software. Why is this happening and how do I stop this from happening?
View 1 Replies View RelatedWhen I click Start >Adobe PSE PSE starts in Organizer mode. I want to go directly to Full Edit mode. I looked for a setting in Edit > Preferences, did not find a setting there. How can I tell Adobe, PSE what mode to start in?
View 9 Replies View RelatedI'm using pse10 on a computer with an i7 processor with 12GB of ram and windows 7 with a color laser printer. The print function works fine while in organizer and sharing mode, but not from full edit. When I try to print from full edit, I get an error message with a red "X" on it that says: "Before you can perform printer related tasks such as page setup or printing a document, you need to install a printer." I can't figure it out. The printer is in "ready" state, and works fine in the organizer mode, and in share.
View 2 Replies View RelatedI have been learning elements 9 and when i save an edit lots of times the organizer shows it as a torn or broken photo. When i bring it back into full edit, the picture is there but sometime i get the wrong one as i can not see the photo.
The save or save as did not automaicly put in the suffix. Added that and it showed up. Maybe some one more advanced than i can collaborate that finding.
how to upload images from an album in Elements 11 Organizer to an online print service? I am using a Mac OSX 10.9.2.
View 8 Replies View RelatedI am using an iMac with up to date software. I import photos from my SD card. It creates a file in "my folders" but image does not appear in organizer window. I have tried restarting the computer as well as uninstalling and reinstalling the application.
The only files that appear under "Media" are the music files. There are 8 other pre-installed folders (animals, flowers, holidays,etc) but highlighting them does nothing.
I have PSE 8, PS Premier 8 and LR 4 insta;lled and haven't had any problems with them. Yesterday I tried to open PSE 8 and received a 'Bad Image' message that stated
"C:Program Files (x86)AdobeElements Organizer 8.0amtlib.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.'
However, I went to My Pictures, selected a file that I had edited in PSE 8 a few weks ago, right clicked on Open With PSE 8 Editor and there it was. When I right clicked on Open With PSE 8 Organizer, I got the same error message as shown above. I also tried openiong Organmizer through Editor ald also got the same error shown above.
How do I resolve this? I'm running WIN 7 Pro, DELL XPS 8300.
I am trying to import some jpg files into organiser from a windows folders. What turns up in organiser is a thumbnail (there is no image) for each photo. Properties indicate that it is the correct jpg. I can open the file in Elements. There is something about the files that is causing the problem. Moving the file to another folder makes no difference.
View 11 Replies View RelatedWhen I import JPEG files to Organizer, the resulting thumbnails show up as opague with an hourglass symbol.
I previously imported hundreds of JPEG files and those thumbnails were always visible. My organizing has been brought to a standstill.
The Organizer and the Editor stopped working together in just 1 of my catalogs. It happens to be the catalog in which I have done the most image manipulations such as renaming, stacking, albums, rating, etc. Now, when I select a photo in Organizer and click on Fix, Edit, the Editor window comes up but the photo does not appear in Editor. The only way I can get an image into Editor is to pull it directly into Editor. Then, when I want to save it as a Version Set I have to choose File> Organize Open File in order to save the image as a version set. Other than deleting and re-creating the catalog, how can I get Editor to open the image from Organizer like it used to do?
View 2 Replies View RelatedThe Organizer thumbnails is showing broken images for some pictures, but when I look at the pictures using Windows Explorer or any other photo editing program, they are fine. I've already tried right-clicking the image and clicking "Update Thumbnail". How can I fix the thumbnails?
Adobe Photoshop Elements 11.0.0.0
When I try to add a rating to an image, i get an error message: the requested change could not be completed because the catalog is corrupt. You can attempt to repair in file - catalog.
View 1 Replies View RelatedPrevious versions of PSE have displayed the date/time info for each image in the organiser. PSE 11 doesn't do this. Where I can change settings so that it does - this info is very usefu to me.
View 1 Replies View RelatedWhen I import my photos from my hard disk to the organizer the image number does not come with it.
View 2 Replies View RelatedHow do I transfer the entire organizer of Elements 9 to the empty organizer in Elements 12? By the way, Elements 9 is so defective, it will not even let me back up my organizer in 9. The 9 organizer would let me select a photo, bring it into the editor, print it and then it would crash... then I had to start all over again... the darn thing crashes as it was prone to problems that adobe ignored. Is it better to just re-load all the photos from a fresh folder that is on my desktop? There are 5,000 !
View 1 Replies View RelatedI'm using PE9. Every time I go to the Organizer (even after switching to another program briefly) the Update box appears, searching Watched Folders for new pics. It always finds them, frequently the same, imports them and then tells me they're already in the Organizer. During this process, which may last 5-15 minutes, I can't use the program.
View 1 Replies View Relatedhow to scan an old 1888, 10x12 photo in two halves (left and right), and used the Elements Photomerge to combine the two shots. It worked quite well - slightly askew at the top edge, but the rest of the image appears to be well-stitched - to the naked eye, at least.
After sharpening the image, I went to Guided Edit and began using the brush to "heal" a few of the old marks on the image at full size - that worked well!. Until I moved my brush into the area that had been the left side, that is.. The brush no longer worked. Then I noted that the about 1/3 of the left side was not sharpened like the right side was, either! To test it further, I changed it to a black & white photo. Only that larger right section changed to black & white, and the left part of the image stayed it's old sepia color. I saved the images, closed and re-opened Elements - but had the same results. The left side just can't be edited.
Isn't there a way to edit the entire merged image?
I've saved the image as a high-quality JPEG, and also as Adobe Elements format - but they still won't fully edit. The two are large files - I was thinking that I'd need to save it at high-quality in order to end up with a nice retouched & sharpened 8x10, suitable for framing.
Also, I'm running Windows 7 Home Premium, 64 bit on one laptop, and Windows 7 Professional, 64 bit on another..(I'm trying to get by with the Elements version I have, due to finances.)
What is the diff in CS6 and Photoshop elements 11.
View 3 Replies View RelatedI've resized a photo in Image Size but when opening Canvas Size, the dimensions have changed slightly. Why?
To get the printed size I set in Image Size, do I have to alter the canvas size or do I not need to bother with it?
I was working with Photoshop 6 & 7. I just loaded CS on my PC this weekend. Just wanted an outline as to what the difference between PS cs,element and image ready.
View 2 Replies View RelatedI generally have ½ a dozen graphics minimized in the full editor where they dock from the bottom left by default. When switching to the Organizer and back to Full Editor the minimized graphics have moved to a position relative to the top of the Organizer’s lower view panel. This generally leaves the minimized graphic’s behind the currently open graphic.
I see no way to lock the minimized graphics and the only work around is to manually dock them at the top of the Full Editor’s workspace, which is a time consuming hassle.
I am trying to understand the difference between apply image and blending modes as I realize my grasp of it is weak.
Why blending the duplicate of an image with the original, with a given blending mode, does not give the same result as, Applying the duplicate of an image to the original with the same given blending mode in Apply Image?
What I have done in Photoshop, to be clearer :
1. one image ("background image"), duplicated it ("copy1") and set the blending mode ot linear light (for example). I get the result 1.
2. I selected "background image" and applied it in linear light (for this example), with Apply Image, to the "copy1" image. Result is different.
I'm using version 5.5 in Windows 2000. I am confused because all other images in other programs etc appear normal whereas in photoshop 5.5 they have a greenish tinge. I corrected this on the original image by choosing View > Preview > Uncompensated RGB. However, if I try colour adjustment etc e.g. variations, all the preview images still have the green tinge. Does anyone know how to correct this?
Also Uncompensated RGB is supposed to be the default view, but when I close PS the setting is lost and on opening, all images including the original are back to green. What am I missing? I have other versions 5.5 and CS on other pcs with no problems.
Can anybody tell me the difference between Merge Visible and Flatten Image?
View 1 Replies View RelatedI made an image using CMYK (for printing later on), and the color is fine when I try to print it onto printing paper by just selecting the Print button on PS. However, when I saved the image as a .JPEG, the color changes drastically.
View 2 Replies View RelatedI am using PSE10 and am finding that the colour showing on my edited photos is different to what displays on the Print Preview screen. This displays and prints much darker. I am using a Canon Pixma IP4950 printer recently purchased. I have tried various adjustments to settings but with no success. I find that I have to lighten each photo x 2 to get a decent colour print.
View 14 Replies View Relatedwhat is the different between a movie file (.wmv) and a PDF file (.pdf)
View 3 Replies View RelatedWhat is the difference between a catalog and an album?
View 5 Replies View Related