I'm trying to copy a pattern on a baby blanket in a photo, there was someone holding the baby and I was able to cut out the hands, and replace it with a general color from the eyedropper tool but now it just doesn't look right with the solid color. I tried to use the spot healing brush and coax the pattern onto the solid color but to no avail
View 4 Replies
What I want to do, is take the path tool, make a pattern around a picture (which is rectangle) placing it on a picture of a board like this...and then pull the picture horizontally, and vertically, to make it circular, to fit the perimeter of the board. If I understand it correctly, when you use the path tool...it allows you to make an image round (from rectangular) is that true?
View 1 Replies View RelatedI cant copy and past pic into another pic after deleting all around pic.
View 2 Replies View Relatedyou could copy the layer from picture 1 to picture 2.
So you coud copy whole "effect-strings" much easier as before.
Is there a chance to implement this feature to P.net?
I have created an intriquite pattern. How do I copy it vertically and horizontally and make it appear seamless?
View 1 Replies View RelatedSo I have been hired to map a pattern onto a picture of a bag so it looks like the pattern is on that bag. I have the whole adobe creative cloud so I have all the programs I could possibly use but I don't know how to make the bag look like it has a pattern on it. I know to to creat a geometrical shape, revolve it, and map a symbol onto it and I know to to make a symbol but what I'm trying to figure out is just to have a plain image and map a pattern on that.
View 1 Replies View RelatedI can't even copy the picture on Adobe elements10 because of a guestion mark on all my pictures how can I get around this?
View 1 Replies View RelatedI have 2 jpeg images one of a scanned pattern, one of a hand drawing black only. See attachments.
I would like to fill the inside of the black line. Basically an elipse with the pattern that has been scanned in.
How do you add a "pattern" to a frame around a picture. The reason I ask, is when you go to make a frame around something, it asks you what "color" you desire. I don't want a "color", I want a "pattern" (the birch wood pattern).
View 6 Replies View RelatedAfter opening a picture in Photoshop Elements 12, how can I copy this picture to a word processor document?
View 3 Replies View RelatedI have a problem with copy paste from illustrator to photoshop. The pasted picture/element is rasterized and not sharp. I have this problem with vector element too.
View 3 Replies View RelatedI am working with inventor 2014 professional now. But There is a problem. it is ( a: 2d translator not installed and b:sketch export failed ) . dxf drawings of sheet metal environment, particularly these problems started recording format.
View 3 Replies View RelatedOn my website, especially when pictures are side by side, I try to make all the same, i.e. square. To me it looks better. I have a picture that is rectangle and obviously cannot resize to a square - distorts the picture. I know there is a way to copy the rectangle picture into a square picture frame which allows the picture to be square while not distorting the rectangle size.
But I don't know how to do this. I have watched a video on this but still not clear how to do it.
How do I copy a picture from a Word document and save it as an image file?
View 1 Replies View RelatedI am working with Paint-Net 3.5.8 and have a problem: I want to open two pictures and like to copy one detail of picture 1 into picture 2.
Sounds easy but isn't, probably because layers in involved ?
When I have a picture of my daughter, wearing a blue dress and I want to add some text in blue, how do I do it to have the same shade of blue as her dress ? Is there a way to sort of copy a color ?
View 5 Replies View RelatedI'm making a texture with paint.net, but i need to move certain pixels to other picture. How do i do that?
View 2 Replies View RelatedSo here's the problem: I am working for a photo journalist/traveling photographer moving his 8tb database into Lightroom 4.Now, for whatever reason, he wants the ISPC-metadata headline, the title, and the caption to be same for each picture. What I mean by that is not simply giving every picture the same exact name, but rather have a picture with the headline "Machu Pichu during Sunset" also have the title ""Machu Pichu during Sunset" and the caption "Machu Pichu during Sunset". So far I've done copy and paste between those boxes (I usually only have a headline) for every single picture, but as you might imagine, with 8tb, this will drive you absolutely insane. What I'd like is to have is some sort of Metadata preset telling Lightroom to just take the headline and copy and paste it to title and caption. Is there any way that is possible? This would really save me tons of completely redundant work.
View 1 Replies View RelatedI'm wanting to know if there is a way to Copy a selected area from Excel and Paste into Autocad and have it as lines and text objects?
Before everyone is entering the information in RED multiple times, once in excel and again in our cad file.
I don't want a data link because we are sending, only, cad files to our customers.
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
The pattern stamp is not loading the correct pattern in Photoshop CS6. Although it shows the correct image when I go to Edit - Define Pattern, once I start painting I see that is not correct.I tried resetting my preferences.
View 3 Replies View RelatedI have a pretty basic knowledge of Photoshop and I am trying to change fabrics on curtains I have managed to do this but now I am trying to use pattern maker to create a tiled pattern with a fabric so it repeats correctly I have worked out how to start this off but every time I generate a pattern and tile it it becomes distorted I have tried increasing the sample detail but this just seems to distort it more.
View 2 Replies View Relatedwhere could i find a pattern overlay/pattern of holes for a metal floor.
View 9 Replies View RelatedHow can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
As you see in the template photo (the photo was scanned by Microsoft Security Essentials, healthy) I wanted to extrude my circle, and I made 28 pieces with circular pattern feature; now, do I have to choose all the pieces by one by to be able to choose all?
The sum of the problem: while using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time.?
How is it possible to use "Feature Pattern Select'' to make the Pattern a want in an assembly?
View 9 Replies View RelatedIs it possible to take a feature created by a pattern and reuse it to create another pattern? I have a circular part on which I have created a linear pattern (using the rectangular pattern feature) of holes, 6 in total listed as 3 ccurrences. if we number the holes 1-6, I would like to make a circular pattern based off holes 2 and 5. I have been unable to figure out how to select the individual "occurrence" related to the hole once in the pattern feature. If I create the circular pattern first and then the linear and try to suppress the others it supresses both holes in the occurrence.
View 4 Replies View RelatedI played with the feature a bit and understand how to create the patterns. Problem is when I go to fill in my 12x12 space there are seams. I have chosen different sizes in the pattern window but all show up with seams when I fill the larger space. Am I doing something wrong or is the largest size you can create with this tool seamlessly only 9x9?
View 8 Replies View RelatedWell, the title pretty much says it all... if you have a pattern set that you've already created, how do you continue to add new patterns to it while keeping those already there? I'm going to end up with a few gazillion of them because I do texture maps in Poser. So I HAVE to be able to keep adding new patterns to the Plaid Set, the Polka Dot Set, the Purple Monkey set... But I can't find this info anywhere.
View 3 Replies View RelatedI am creating an assembly with my base part being a weldment. I've added other components that mount to my base part. Now I need to add fasteners to the mating components. I have added my first fastener and now want to pattern the said fastener using the "Pattern Component" and by using the "Feature Pattern Select" option and selecting "Associated Feature Pattern". At this point I have already selected the component that I want to pattern and selected the "Associated Feature Pattern" to select my base pattern. The only problem is that I am unable to select the pattern desired.
A note on how my Weldment was constructed -The holes were created in the "machining" step of the weldment, not in the individual part before it was placed in the weldment assembly.
If I move the hole feature and its pattern to the individual part and then place it in the weldment assembly, I can then create an "Associated Feature Pattern" in my assembly file.Why can I NOT create the associated pattern when my hole features are created in the weldment assembly? Or am I missing something?
I have an assembly which I am using as a icopy component. In the assembly I have the adaptive sketch which os used for the icopy function and a part which is adaptive to the sketch. I then have the part pattern itself in the assembly. The problem is the pattern will not update when changes are made unless I edit the pattern. The pattern references parameters from the sketch so that when the sketch changes the pattern should change. It works but the pattern will not update unless i open the pattern to edit it. Is there a vb function which will force the pattern to update when a change is made? I tried the update document vb functions but no change. I will try to get a sample together that is a smaller file size so you can see what I am talking about.
View 2 Replies View Related
