How do I change the color and/or adjust the color of a single object in a layer without it effecting the other objects in that layer and without it effecting the other layers in the group? I'm using PS6 .
View 2 Replies
I want to change all pline in drawing to a specific object color (color 253). My code is not working & my brain is not functionning properly today...
(DEFUN C:TR() (SETQ ALL_PLINE_IN_DRAWING (ssget "_X" '((0 . "LWPOLYLINE")))number_of_pline_in_dwg (sslength ALL_PLINE_IN_DRAWING)entity (ssname ALL_PLINE_IN_DRAWING 1)data (entget entity)new_LAYER (list(cons 62 253))data (append new_LAYER data))(entmod data));END OF DEFUN
I want a lisp to change all object colours from bylayer to its color Example (if layer doors its color is blue the color of objects drawn in this layer will by blue not bylayer)
View 9 Replies View Relatedlisp..It work fine but just that i need some minor modificatio to it...At moment, when i activate the lisp, it will automatic select all dimension,leader and multileader to a layer call "DIMENSION"...Anyway i wonder if it is possible to prevent any dimension,leader or multileader in layer "Section" will not be change to layer "Dimension"?
View 2 Replies View RelatedI have try Coreldraw X6 64bit in Windows 7, After use Color Harmony, I have a question about it, How to change color for selected object only, because color harmony change all color in object even it in different page ?
View 1 Replies View RelatedI have a photo that has a Black car in it which I need to change to a bright yellow. I have tried to use "color" to change the color but it is not the bright shade of yellow that I need. What is the best way to change the color of the car without losing any of the shadows, lines, etc.
View 1 Replies View Relatedim trying to do is change color of a certain part of a bike like a frame, wheele, seat, etc.
View 9 Replies View RelatedSomehow I've turned off the color selection so that I don't have a color when I select a part of a drawing on a layer. The drawing area stays black whether I have selected it or not and I don't know how to turn back on the color.
how I can turn on the color again so that when I select a line it changes from black to red or magenta or whatever?
I am trying to follow this tutorial ...
[URL].........
Under #2 ... I am assuming the author means to draw with the Rounded Rectangle in Path mode ... am I assuming correct? I think it is suppose to be set to Path b/c it's the only way the Blend Mode reads "Pass Through"
this tuts steps aren't really numbered well but also under step two where the "BG" is filled with black the resulting shape is suppose to look like this :
But mine looks like this :
Notice how the left side has a lighter grey color and the one from the tut above is clear?
Also under step #2 ... where it comes to the part where I am to color the resulting shape with a yellow gradient this is what happens to me :
the entire canvas becomes colored ... ? Here are my Layers.
I select the "BG" layer to apply the gradient.
Here is the Layers panel from the tut which is confusing to me b/c the only difference I see is that the tuts panel has the down arrow and folder of the top layer/the "Body" layer seems to be greyed out... and the tut says something like : Activate the "BG" layer and cancel the mask view. Well, how to go about canceling the mask view and I looked all over Ps for such an "action" and also throughout the online manual.
I made a layer, then I added an ellipse to it then I created a duplicate but I want to move this one somewhere else but change the color.
I tried using the tool that you get when you press 'w' and selected the shape but then how do I change the color? Is this the correct approach to take at all?
I should say is there a tool that can change the color of the layer quickly? So if I open photoshop, then I want the entire layer to be a color what should I do?
I did Apple - A to select All, Edit...Fill and picked a color.
PS6. How does one change the BG Background color of their layer?
My Steps:
File>New Layer> OK with parameters
New Layer is created.
I use the Rectangle to cover transparent layer. It fills the color with Grey. The color that is selected in the little box at the bottom of my tool bar.I go to change the color and want to fill the color or change it to say Blue... It won't. What step am I missing to do such an easy thing?
I would like to change the silver colour VCR into black colour and with all the details and shinny reflection.
View 1 Replies View Relatedfor no apparent reason I am suddenly unable to change the layer that a object is assigned to. Normally I select a line, then go to the layers pull down menu and click on the desired new layer. Automatically the line changes color to the selected layer.
When I follow this procedure now, the layer name changes in the pull down menu as if the change has been made, but the line remains the old color. Checking in Properties for this line, it shows that it has been changed to the new layer as well, however, when I reselect the line, the Properties changes back to show that it is still assigned to the old layer (color: By Layer is selected).
I have a collage I put together of several guitars, and I want to outline the guitars in a gold outline and change the background color to black, to make them stand out. I can't figure out how to do this. If it matters, I have Photoshop CS2 for Windows.
View 1 Replies View Relatedhow to change the colour of the selected layer in the layers pallete? It's quite annoying the way it is (Dull grey/blue) and sometimes hard to see what layer's selected?
I prefer the brighter blue on my other computer!
How do I change skin color using a layer mashow do I apply the mask if I want just change say an arm or just the face area
View 1 Replies View RelatedI cannot change the color of any object in any drawing file from the properties manager or color command. I can change the color through the layer manager by assigning a new color to that layer, but cannot override the ByLayer and ByBlock settings with the object properties. The color drop down is simply grayed out. I am using Autocad lt 2006.
View 7 Replies View RelatedI am working on piping plan. I have four differents pipes on same layer. I would like to change color of one pipe in active viewport and keep the layer color unchanged in same Viewport. I would like to keep the layer color unchanged for model space or other viewports.
Is there any way to change the property of an object in active viewport?
I bought an image from shutterstocks... But when I change a colour, it all turns in monochrome colour. My Ai (CS6) knowledge is very limited, so I do not know what to Google "How to..."
I would say that in a moment I change colour Ai understands that I colour in borders and all lines overlaps each other... However, I do not colour borders...
Image is very complex pattern and I believe it is somehow related with image production... The image does not appear as it looks like - everything is over layered with cut-outs of object above... But it is beyond my knowledge...
I have tried to ungroup but with same results... How to manipulate this image?
I made the background of an object (single color symbol) transparent, then re-sized it. I then added a transparent layer to another image, with the idea of placing the symbol onto that layer. I tried to move the symbol, but that didn't work. I copied the symbol image and tried to paste it onto the layer. It pasted, but all I got was a transparent rectangle that matched the size of the symbol image.
View 2 Replies View RelatedThis is in regards to the LIP command in Toolpac. The layer properties for a selected nested object (LIP) used to default to nested. Now you have to select nested from the list of options. Why they would change LIP. My whole company had gotten so used to it.
View 4 Replies View Relatedlayer manager not keeping your color selection the first time when you attempt to change the color of a layer? I have not repeated the experience enough to know the particular situation under which this happens but the result is the same. I open layer manager, click the color swatch to bring up the color selector and select a color, select ok and ok. When I look at the layers color it did not change. It seems to happen most on newly created layers.
View 6 Replies View RelatedI can see the opacity controls for Layer Properties, but I can't seem to set the color of the layer itself. How do you do this?
As always, what I'm trying to do is create an overlay "mask" to cover up part of a GUI screenshot. I've learned the hard way that you can't simply draw a box and then move/adjust its properties, so I'm going with a layer as instructed.
I use the brush to paint. After a while I would like to change the color of that object.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
Is there a tool out there that will allow me to pick an object and change it's layer properties?
View 9 Replies View Relatedwhat/where is the pref to change the color of wire frame of a selected object- I'm trying to use the unwrap uvw and the fragile, winsome pale blue of a seam doesn't show up against the peak white of the wireframe.
(I must say my whole experience of 3dsmax has been awful because I can almost never clearly see what I am doing, as the whole interface color scheme is horribly designed)
here's a pic - spot the seam - this is in hidden line mode as you can/cant see, the pale blue line of the seam is blown out by the wireframe.
I've been trying to change the edge color for a 3D solid object but not able to.
I've tried using the function in Autocad but it just wont work.
I need the finished script to create a rectangle with no fill and a 20% gray stroke to outline each artboard. I dug this up off these boards, which works perfectly except the rectangles created have no fill or stroke. certainly save me a lot of time drawing rectangles on a daily basis.
#target illustrator
var docRef = app.activeDocument;
var artboardRef = docRef.artboards;
for(i=0;i<artboardRef.length;i++){
var top=artboardRef[i].artboardRect[1] ;
var left=artboardRef[i].artboardRect[0];
var width=artboardRef[i].artboardRect[2]-artboardRef[i].artboardRect[0];
var height=artboardRef[i].artboardRect[1]-artboardRef[i].artboardRect[3];
var rect = docRef.pathItems.rectangle (top, left, width, height);
rect.fillColor = rect.strokeColor = new NoColor();
}
I'm working on this study and I need to change the color of an object inside a symbol when I click another object.
The object is called "bola", wich is inside the symbol "ponto" and the clicking object are the colored pencils (each pencil should change the color of the symbol's object, giving the impression you'd selecting a different pencil to draw).
I think it's simple to understand what I mean when you see the files.
I already tried this line on click event of the pencils, but it didn't work:
sym.getSymbol("ponto").$("bola").css("color","#123456");
I would like to improve the experience of drawing as well. I made it with the "mousedown" event. Is that a better way to get a similar effect?
If I drag an effect from the target circle of one object to anther in the layer's panel it replaces the effect along with all appearance. But I want just to add the effect. For example, a layer has a drop shadow and a path, round corners. I want to move the drop shadow from the layer to the path so that the path now has the round corners and the drop shadow. To do this I have to open the shadow effect of the layer wright down its parameters, then create a shadow effect for the path with the same parameters which is a lot of work.
View 3 Replies View Related
