I have downloaded a trial version of cs6 and for some reason i can't see the marching ants when i make a selection, i can use the marquee tools and draw the selection, and the marching ants are there,but as soon as i let go of the mouse the ants dissapear, i have tried clicking and unclicking the selection edges in view but that makes no difference.
View 3 RepliesI am having trouble in CS6 with selecting a portion of my photo, with any of the tools- quick-selection, lasso or magnetic lasso.
What happens is that once I have completed my selection, I get strange rectangles of 'marching ants' throughout my selection. These show up as different colours on the layer mask as well. When I first used quick selection it worked properly.
The newest version of Gimp no longer maintains the marching ants for the selection window when you select an image that is on a transparent layer (my observation). It seems to only select the (smaller) image(s) that are contained therein; the selection is restricted to the outline of the image only. I am trying to maintain proper spacing etc. and the marching ants selection window was wonderful for that.
View 5 Replies View RelatedI'm using PS CS5.1 (extended, Mac), and until this afternoon my crop grid has always displayed as a solid grid. Now it's displaying with marching ants, and it's driving me insane. Did I accidentally do something?! How do I get my crop selection area to display as a solid grid once again?
View 1 Replies View RelatedPhotoshop CS4 Extended, Win XP SP3 - all updates / 4 gig ram / Core2 duo quad 2.4 / Invidia 8800 GTS with latest driver and no brush problems / GL drawing enabled.
For some reason, my marching ants are not marching when I made a selection. the selction is good and can be filled, masked or invereted, but the ants aren't marching. Anyone have a clue as to why?
On Photoshop CS4 Windows XP the Marching Ants don't so much as march as they run.
PS I have updated the driver on my Nvidia "approved" card.
The marching ants interfere with my selection work consequently I always hide them with command H but this option does not appear available in CS6.
View 5 Replies View RelatedIt seems like all of a sudden my marching ants are dim to nearly invisible as I'm making a selection. I haven't updated my software. They show up in some graphics better than others, and once I've made the selection, they show up white again. Example: I'll be using the rectangular marquee tool.
This happened at the same time that my custom blending options all reverted to the defaults. However, I hadn't made any custom marching ants settings. I don't know why my custon blending options reverted to the defaults, but it's possible that this was triggered by a hard shutdown that I had to do after my trackpad froze.
Computer: Mac OSX 10.6.8
Software: CS5 extended 12.0.1
I just came from a friends house I we were look at his cs5 and I noticed that his marching ants on selection tools were much lighter than mine. to the point of being hard to see were the anchor points...which brought me here with this question, "can marching ants be made lighter or darker" and if so where is the control for that
View 3 Replies View RelatedI seem to be unable to get rid of yellow marching ants and yellow dashed border around the entire frame.
I have created a new file, white background, drawn a rectangle, bucket filled it black but want to move it around.
When I use the move tool it moves the whole frame i.e. white background the black rectangle. Do I just need to add a new layer for the black box?
I used to be able to select a layer (getting the Marching ants of a layer on a image) via the Layers palette (I think I used to press ctrl + mouse-click) but now, in Photoshop CS2, I can't get it to work.
View 4 Replies View RelatedThis morning, my Selection Tool (the filled-in arrow) is acting like a Direct Selection Tool (the hollow arrow), but only when I click and drag on a group. It ends up select the anchors within the group rather than the whole group itself.
I've checked my preferences, quit and relaunched Illustrator a few times, and nothing seems to fix it. The problem briefly went away a few minutes ago, but came back when I quit and relaunched for good measure.
It's happening in Illustrator CS 5.1. I have CS6, and that version works fine, but I'm waiting on some plugins to be updated for it, so I'd like to use CS 5.1. I'm also running the latest Suitcase Fusion 4.
Using the selection tool i should be able tp reduce or shrink the size of the box or an image as a whole without changing the format. Iam not able to do that. I think i disabled something in my illustrator.
View 2 Replies View RelatedI have been continually annoyed, when creating a vector mask-heavy document, with trying to select vector mask points by dragging a rectangle only to find that it instead selects a layer higher up which has a larger vector mask.
The only workaround is to manually select the points of my mask or to drag a rectangle from outside the canvas, meaning I have to zoom out or scroll to the edge - sometimes annoying if I am zoomed in quite far.
I know that the move tool can be set to automatically select a layer, depending on what part of the image is clicked, but why is there not an option to turn this off for vector editing?
If you look closely in the attached picture, there is a spot of light blue on the player's helmet, that looks like a mistake (think it should look like the grass behind it)...though it actually may be part of his helmet.
Regardless, I'd like to take it out. My idea was to select the blue with the quick selection tool, then bring that selection out to the grass, select the grass with that size/shape of selection, copy/paste and then bring the grass selection into the blue part so it looks like grass in what was the blue part.
The problem is I don't seem to be able to move the selection without taking the blue with it (so it's not an empty selection and therefore can't select a piece of the grass.)
When I use the square selection tool, the selection edges are rounded rather than square. I can't remember how to rset this.
How do you make the edges square by default?
I just installed a trial version of PSCS4-Extended, I donot have a GPU instead depend on the inbuilt Intel solution for display (onboard). I have plenty of RAM (2GB) running Vista Ultimate.
1. All the menu items are grayed out upon launch, this can be corrected by clicking on one of the tool icons.
2. Whenever I use a marching ants based tool (magic wand, marquee etc) The display does not update to reflect the selection. One has to click on another tool icon or move the window and then it shows. Also, the marching ants are no longer "marching" but its kind of a dashed line selection.
3. The thumb in the palette window becomes garbled upon any work done on that layer.
I have an image that has three different subjects on it. (mountain scene) I would like to control levels, contrast, etc. separately on each subject. In channels I have been able to isolate the first subject from the others through levels, erasers, and paint brush. In a trail run I used this channel copy as a selection, switched back to layers, copied the image under that selection, (pasted into) a new layer, went back to channel, copied the channel layer that I just created, inversed the selection, went back to layers and copied image under selection, (pasted into) a new layer. When I turn off all layers except these two, I end up with a white line where the dancing ants inhabited. Therefore I assume the width of the dancing ants is not part of a selection or is centered on the selection.
View 3 Replies View RelatedI did something and I'm not sure what. But my selection tool has changed. Now when I try to alter the length of a clip in a timeline, it automatically switches to the rolling edit tool with the 2 arrows on either side of a line. If I try to just grab the end of a clip it also drags the end of the clip beside it as well. It affects inserts and almost anything I do. I can't figure out how to return my selection tool to normal.
View 2 Replies View RelatedI don't understand if the problem is the same of this: [URL]
Any way i do not understand with after using -convert point tool- the tool -Direction tool- (2) do not leave me to manage both the direction handles (3). I try to upload a screenshot:
(1): how work Direction tool (it moves both the direction handles).
In Indesign CS6 using Mountain Lion, the hand tool appears and I can't select or work with any other tool. All I can do is move the document around. After trying the space bar and other key commands I restarted and it worked for a while. Then it happened again. I work on a Macbook pro, so when I removed the mouse and worked only with the trackpad there was no change. When I quit and reopened, no change. I then deleted prefs and restarted and it worked, but it's been happening from time to time. Any other fix without restarting or deleting prefs.
View 24 Replies View RelatedOnce I close the selection of the pen tool how do I copy it to a transparent canvas?I right clicked and chose copy but when I pasted it onto the new canvas the whole background came with it.Or maybe the path isn't completely closed because I don't see the marching ants.
View 3 Replies View RelatedI am trying to cut out a selection with my pen tool, I make cut out but it does not cut out what I wanted, instead a new layer is created when I try to make the cut out selection, What do I do so it cuts out what I want instead of making a new layer
View 2 Replies View RelatedPhotoshop CS3 sees the addition of the quick selection tool. Designed to be semi-automated, it's designed to speed up the selecting process, especially good if you're in a hurry!
My question though, is just how good is it? Anybody mastered it yet? One of the things I'd like to see is a kind of sensitivity control, I know that would start to defeat the object of it being a 'quick' selection tool, but sometimes having the option of adding more control to a tool can drastically improve its useability.
I recently moved up from Photoshop Elements to CS5 which included a Selection Brush Tool in addition to the Quick Selection Brush. The Selection Brush Tool allows you to paint a selection free style without being bothered by the "Quick" feature that provides guesses about where you might want to select. I could not find the Selection Brush Tool in CS5. Is there one? The lasso is not as easy to use.
View 3 Replies View RelatedFor some reason, all of my selection tools (like marquee tool) become invisible as soon as I let mouse 1 go. So I can't really see what I have selected, however I can modify my selection, cut it, transfor or do anything else I want..
View 3 Replies View RelatedAdobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1
System architecture: AMD CPU Family:15, Model:15, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 1
[code]...
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
[code]...
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash: NONE
Installed TWAIN devices: NONE
I want to use the Burn and Dodge tools to create Shading and Highlights...However, I need a Rounded shape selection for the ... uhhh "grooves" between the prongs in order to dodge and burn precisely
To my dismay the Marquee tools don't have a Rounded Rectangle nor could I find a way to set the corner radius of the Marquee Rectangle..The Lasso doesn't allow me to create what I need and even if I could use it to make it just right I couldn't make it exactly the same three different times.
Why is the scribble selection tool not in Photoshop CS6?
View 10 Replies View RelatedUsing CS6 on windows 8, when I use the selection tool, my entire project flashes. Whats wrong and how do i stop it?
View 2 Replies View RelatedWhenever I try to use a selection tool my image starts to flash from a blank screen back to the image and i can't do anything after that point unless I undo the selection.
View 1 Replies View Related