I have photoshop 7 and all of a sudden I'm having problems getting the program to load up. As its going through its initial processes an error comes up saying the request was not understood by the server. HTTP# 400- Bad Requset.
Reinstall?
I just installed CS3
I was sent a .psd-file (actually 3) which were created in Photoshop CS3 but I can not open any of them, because PS tell me
"Could not complete your request because it is not a valid Photoshop document."
Also, I was sent a lot of .psd-files during the last years and I have most of them in my email-account. Unfortunately, I can't even open any of them either!! And these were .psd-files PRE CS3 and worked just fine in CS2 ...
I tried everything:
- Drag & Drop from Windows Explorer into Photoshop
- "Open as"
>> Nothing seems to work...
I have no MS Paint or digital photography skills at all. I have tried, but it never turns out the way I want it to, so I come to the digital photography pros for a favor. Would anyone do a simple job for free? All I need is text added to the picture.
I would like "GA VA 2006-2007" and underneath have "22-14-8". The bottom left would be the best place, I think, but if you have another idea, go for it. All I want is to make it look good.
I use Photoshop CS4 now and I have a problem when I want to import (by dragging'n dropping, importing, open - I tried every way)a .png or i.e. also an .jpg:
when I worked a short time with PS (i.e. 10 minutes) and want to open a .png then, there comes the popup-window with: "Could not complete your request because the file-format module cannot parse the file"
The funny thing is: my file is NOT broken!! Because if I then shutdown PS and open it again, there is no longer a problem to open the .png-file.... after a while of course it comes back...
Using CS6 Photoshop extended on iMac early 2008 model.....
Processor 2.8 GHz Intel Core 2 Duo
Memory 4 GB 800 MHz DDR2 SDRAM
Graphics ATI Radeon HD 2600 Pro 256 MB
Software Mac OS X Lion 10.7.4 (11E53)
I get this message when I try to open a .mov file...
"Could not complete your request because DynamicLink is not available?"
A customer of mine has a problem when he tries to open a pdf document in photoshop. This document is only 50MB large, but Photoshop displays the message "could not complete your request, not enough memory (ram)" when he tries to open this.
It is a windows 7 x64 system with 6GB of RAM. When the file is being opened, in process explorer you can see that photoshop is using more and more RAM untill it reaches the point of just above 2GB. Then photoshop displays this message.The system still has 30% free RAM memory left, but adobe won't use this memory.
I run CS4 on Windows 7. Whenever I boot up, I get an error/prompt that says I have to restart the computer for updating to continue.
I know this has been discussed in many different places here, and I have tried everything everything I can find in them. Sometimes I get a fix, and then the next time updater runs, it's back.
Why can't this well-discussed problem be fixed in an update sometime? Or, perhaps this is my penance for still using CS4.
I am trying to open a video to edit in CS6 and I get this error: Could not complete your request because DynamicLink is not available..I read on one of these forums that I should uninstall and reinstall the program.
I tried to uninstall the program and it told me to use the Adobe Application Manager.Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. " Token Number: 40-87772-063201122012...I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following: #Restart the computer and try the installation again.
I'm using Windows XP and PhotoShop 8.0. I've been working on a drawing all day, and I've opened it up numerous times over the last few days. I've edited it in Paint Shop Pro as well, and haven't had any trouble with it until now. Out of nowhere I got that 'file not compatible' error and I have no idea what to do. I've tried opening it in GIMP (won't open), PSP (won't open), and ImageReady.. which opens it, but all the layers except the bottom one are blank, and the bottom one's colors are wrong and it only seems to show the top half of the image.
Is there any other way I could open and save this picture? I don't have any more programs that might be able to open it, but if someone else could or something, I'd greatly appreciate it. Thank you.
I receive this ERROR when I try to open in Photoshop CS2 different files from the same project.
The file size is about ±52MB, with several layers and SmartObjects.
What makes me insane is that I am able to open it on ImageReady CS2 and Illustrator CS2 but not in PS CS2.
I already try to open it in Windows Safe Mode but no success.
This is vital file for my work. Does anyone knows a solution for it?
I cannot save or go into blending options~
Is there something I can do to not lose all the progress of made of getting that far?
Would any of you guys be able to change the color of this logo from yellow/red to lightblue/blue? Or possibly explain how to do it?
View 2 Replies View RelatedI started to get the message "Could not complete your request because of a program error" a little while back, but it would go away after restarting photoshop, so I wasn't too worried about it. But now I've encountered this one file that won't let me do anything to it. As soon as I open it it pops up with the error message. No amount of clicking makes it go away, and I have to force quit photoshop. Always the same thing. I haven't found anything that works (I tried the file info>copyright idea and deleting Photoshop's preferences, even getting rid of extra fonts, and clearing the library>cache.)
More info:
It's a psd file. There are only 2 layers on the files, one is a vector smart image.
I opened the file and was able to edit it fine on a friend's computer, no error messages whatsoever - so it's not a corrupt file. (But that doesn't solve my computer's dilemma.)
I am having trouble with completing value scale gradations. I do not have a problem using the Gradient Too. My problem begins when I attempt to pick up the color with the Eye Dropper Tool and then apply it using the Bucket Tool. The H slidder remains at the correct number. The S and B sliders do not move so gradation does not occur. I keep getting a "Could not complete your request because of a program error."
View 1 Replies View RelatedI am trying to open a video to edit in CS6 and I get this error: Could not complete your request because DynamicLink is not available
I read on one of these formus that I should uninstall and reinstall the program.
I tried to uninstall the program and it told me to use the Adobe Application Manager.
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
I am on PS CS6 version 13.0.06 x64. Running on Mac OS X version 10.9. Installed the new Maverick on November 10 and not sure if that has anything to do with this.
In PS I get the error above when I go to File/Open and look for a photo file to pull. Before I even get a chance to chose a file the error pops up and does not let me go any further.
Also if I am in LR5 and send a photo to PS through Photo/Edit in/Edit in Photoshop CS6 it will open it. However, when I go to save as JPEG the folders just disappear and brings back the photo and does not allow me save.
Photoshop CS6 version 13.0 v64
On Mac OS 10.8.5
Error Message: Could not complete your request because of a program error.My CS6 photoshop was working before I upgraded my operating system to OS 10.8.5. I uninstalled photoshop and reinstalled it. Still doesn't work. I can't do anything in Photoshop, it comes up with that error every time I try to open a file.
How can I stop CS6 repeatedly requesting entry of the license number.
View 10 Replies View Relatedphotoshop cs6 was working fine a few weeks ago. After not using it for about 2 weeks, I try opening a RAW file and I get this error every time. JPGs open and work fine. I have extensively searched on the internet for solutions and have tried everything such as: disk checking, deframgenting, playing around with photoshop preferences, deleting temp files, resetting preferences, clearing disk space. I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free.
View 8 Replies View Relatedcs 5.5 - launch program get (could not complete your request)? how to fix this?
View 2 Replies View RelatedI've re installed photoshop CS5 in this Mac with success. When I want to finished the installation by updating my profile on URL... website using my Adobe ID I've got an error:Error processing your request"We're sorry, we encountered an error processing your request."Please try your request again. You may wish to try one of the following links: In my profile this CS5 is already declared.
View 4 Replies View RelatedSince upgrading to PS CS6 I too frequently get the following message when yrying to open a document: "Could not complete you request because it is not a valid Photoshop document". This never happened in CS5 and this is the 3rd or 4th time in CS6. The documents are quite simple. Only a few layers - just slightly adjusted photo graphs.
View 1 Replies View RelatedAlthough I have been using it, today I tried to open Photoshop CS4 and received the message: "Could not complete your request because of a program error." I've tried restarting (imac late 2012, Mountain Lion 10.8.2), reloading the program but still get the same message.
View 18 Replies View RelatedI have a single user who's PS (CS6) that seems to always (or atleast, a great majority of the time) corrupt large .psd documents. It doesn't seem to matter if she is working with previously created files, or starting from scratch. If she saves a file that is larger than about 900MB, it corrupts and nobody can open it anymore. I've tried removing the entire CS6 design suite, and reinstalling it, but the issue persisted. I have about 10 users on identical systems that have never had issues, and she never had issues until about two weeks ago. As far as I know, nothing major changed on the system when this started happening. how I can stop the file corruption?
View 21 Replies View RelatedI want to request a background removal for two images. I only want the two girls (in separate images) with a transparent background, as clean as possible.
View 9 Replies View RelatedWe have Photoshop CS2 running on Windows XP SP2 machine with 3 GB memory. Whenever we try to open illustrator CS3 file in Photoshop get following error message:
"Could not complete your request because there is not enough memory(RAM)".
We used to be able to do this without any problems untill I upgraded the memory from 2 GB to 3 GB. Dell technician came and changed the memory chips on the PC still get the same message. I went into performance monitor and not much memory is in use when this error comes up. Tried opening just one application at a time too.
Is there any patch that I need to install on the PC.
I get this message whenever I try to open a PS7.0 file. Strangely enough, this file I opened once with CS and it worked fine, I made some changes and saved it (shoulda saved copy) and now when I open it, you see the loading bar go right to the end, then an error message comes up:
"Cannot complete request due to program error."
The PSD opens fine in ImageReady. But I really need it in photoshop!
I have tried alot of things to make it work, opening in IR then trying to switch to PS. Loading up PS7, saving it again,
I cannot save anything inside of Photoshop.
Ive tried every scan you can think of and restarting PhotShop and Rebooting my Pc.
Using Windows Vista .
Could not complete your request not valid photoshop document
View 1 Replies View RelatedI have a particular set of images that I am editing and then trying to save as RGB JPEGs. I keep getting the message 'could not complete your request because of program error'. I am working on Photoshop CS2 on Windows XP Professional. The files will save as TIFFs and PSD files but not JPEGs. Photoshop will save everything else but not these particular images.
View 7 Replies View RelatedI have a folder filled with 900 PSDs. I want to print them all at once, in order preferably, without having to open up each PDF one at a time and selecting print.
I tried creating a batch action by recording print. However, once it opens too many tabs (around 280 or so within photoshop) the program creates an error stating "could not complete your request because too many files were selected for opening at once"