I have 2 questions.
1. How can I achieve the same background as shown in the image on Photoshop (perhaps with "gradient overlay Photoshop") ?
2. How can I achieve accurate shadow as shown in the picture?
Can someone please show me or point me to the right tutorial that will illustrate how to create a thin background image that has a drop shadow on both the left and right borders that run vertically down a centered web page?
The image has a white middle where content is placed and the left and right borders have a drop shadow. After the image is sliced to roughly 760 pixels wide by 1 pixel tall, it will repeat vertically down the page. It is typically placed in the container or wrapper div? It is similar to a faux column.
I have a pillow bevel applied to a paint splatter brush image, and I'm having trouble with the shadows. I want to save this splatter as a transparent PNG. The problem is that a drop shadow effect is showing up when I save it this way. I think it's a "shading" setting rather than a true drop shadow, as there is no drop shadow set in the layer styles.
The shadow does not appear when a white background is applied. It only shows when the background is transparent. I've tried reducing the shading opacity in the bevel dialogue, and this does get rid of the drop shadow....the problem is that it also removes the shading from the paint splatter, making the image look flat instead of raised.
Last week I shot a company event and didn't have an external flash or diffuser. This resulted in a very contrasty background shadow.
If it were just one shot, I would clone/stamp and be done; but I have about 25 shots to correct.
Any quick method to remove the shadow or at least reduce it's impact?
Photo below...
I have a picture of a girl in a dress. The background is white(ish) and some of the girl's dress is white as well as her blouse.
If I select the magic eraser tool the background is viped out, but parts of the skirt and shirt get wiped out as well... I've read somewhere how to solve this problem, selecting only certain "ranges" of a colour, so that not all the different whites' get erased...
Have also created some text and have added a drop shadow.. is there any way to get the drop shadow to be another colour than grey (i.e. green, pink, blue)..?
I want to change background of a let say chair but want to keep it's original shadow how i can do this?
View 1 Replies View RelatedI created a .png file from our organization logo. I used the magic wand to select and "delete" the backgound, leaving it transparent. However, when placed on our web site, the logo edges have a slight line. What must I do to not have the lines (to make the background truly transparent)?
[URL]
I'd like to add drop shadows to layers without it hitting the background - so it only lands on the actual objects behind.
I've currently done this by creating clipping paths to mask off the unwanted areas, but this is a faily complex setup on the file I'm dealing with. If I change the positions of any of the (many) items on the artboard, I have to recreate all the masks.
Is there a simpler way without using masks, like, for example, just telling the file not to render effects on the background?
I have a rectangular screen grab (Windows application) that I would like to simply round the corners and add a border. The image is not a photograph, but since I have Paint Shop Pro X3 and like how it works, I thought I would try it . I have spent some time trying to do this with Paint Shop Pro X3 with no luck. None of the pre-defined frames seemed to do what I need. I would also like to create a drop-shadow behind the image. how to do this or a video that I can watch. A list of steps would also be OK.
View 1 Replies View RelatedI have recently got photoshop and need some assistance with the basics.
How to I change the 1st image to the 2nd.
I have photoshop 8.0
drop shadow.
See the man on the left. I would like a drop shadow around the man himself, not the image of the man.
I am using photoshop CS
I have created a drop shadow on a green background.
Shadow Black value being C - 0 M - 0 Y - 0 K -100.
In the file and the hard print the shadow comes out as a reddish color. How do I get the shadow Black?
How would I make a perspective shadow on an image such as this? URL.....I have the Alien Skin plug-ins but it doesn't cover all the points of the image. I've also tried transforming a black fill layer with distort, skew and warp.
View 1 Replies View RelatedWhen I open an image to edit in CS6, there is a thin shadow line surrounding it. Can I get rid of that?
View 4 Replies View RelatedI will submit the Black and white ad created in Photoshop to the magazine. The requiment is that for grayscale images, the shadow density should be no darker than 90% and highlights should be no lighter than 3%. I don't know how to check the percentage on the document I made. I checked HELP in Photoshop and website. But I couldn't really get answer from them. I have little knowledge of printing. Please give me advice or helpful website.
View 2 Replies View Relatedhow do i render an image with layers that has a shadow, but hiding the layer that casts the shadow? i just want to see the shadow...
View 2 Replies View RelatedI have this image, and would like to extract the drop shadow from it. I made the drop shadow using the blending options. I would like to just have the drop shadow so I can use it as a background image in a div.
View 5 Replies View RelatedI am placing a photoshop image into Indesign. It is an image of a Poloroid picture. When I import it into ID the drop shadow is applied to the entire bounding box or image surface area. I'd like to have it applied just to the "element" or Poloroid image instead.I'm saving it as a flattened JPG and placing it into ID.
View 2 Replies View RelatedI use illustrator most of the time. I'm designing a brochure and I've always embedded images, but now I'm trying to it correctly by linking them instead. So I have an image in ps as a tiff. I created a drop shadow for the image in illustrator.
I want to copy and paste it behind the image into the same file so both are one file linked to the brochure. Also the drop shadow pastes as too small, then i also can't get it positioned right etc.
I have PSE7. I would like to know how I can add a drop shadow to an image in between the image and the color block.
Below is the image that I am using. I would like to add a shadow from the image on the left to appear on the purple color block.
I'm trying to remove the blitz shadow from head and body on a white/grey background, with the Lasso tool. The adjustments with Brightness/Contrast in the chosen area works like a charm, however I always get a nasty pixeled or whitelined boarder going constantly around the edited area; no matter if it boarders to a black area (shoulder) or a gray one (wall behind person).
I've tried to edit the primary/secondary color, with no luck. Any way to make this boarder "blend in" to the new brightness area - or to just remove it? The edited area is somewhat identical to the old background, so there is no natural reason to why it should be a constant boarder.
Or is it a better (and easy!) way to remove blitz shadow from a black and white picture?
I seem to be having problems when I lasso round a specific part of a photo taken with a white background and then try to add that part of the image to a plain #000000 black background.
I always seem to get a white outline around the image when I place it on the black background, even when its on ZERO feathered. I don't like using feathered as it adds a smudge round the outside of the image.
Do any of you have any tips or ticks for removing a drop shadow from a flattened image?
I have a jpg that I received from a client for a website I'm doing for him. He does not have the logo in any other format. The image is on a white background, which will not work with the design I'm making for him.
The image is fairly simple, it's just some text with triangles, but the text has some layer effects applied to it that I'm not sure where they came from or how to recreate them.
Any ideas on how to remove the drop shadow? I have attached part of the image. If any one has ideas on how to recreate the text effects (including the texture) I am willing to do that and recreate the logo instead of trying to edit out the drop shadow.
I'm using Photoshop CS6. I have a CMYK image of fruit on a white background with a drop shadow that has some cyan, magenta and yellow. The drop shadow is NOT AN EFFECT. It is part of the original photographed image shot against a white background.
I want to turn the drop shadow into a percentage of black only. I have masked the foot so I have the white background and shadow isolated but now I'm not sure the best way to make the shadow a percentage of black only.
I have attached an image that I would like to modify to add a shadow of her in the image, based on lighting directed at her.
How do I do this?
Attached Thumbnails
I am using my CS2 on OSX and when I view the image in a full screen mode the color around the image is grey, well it used to be grey but it is blue now. How do I change it back to neutral grey?
View 3 Replies View RelatedI am currently using Illustrator CS 5.1 and am having an issue with my PDF files. I have a graphic that I am building and when I import an image, place a clipping mask around it and then add a drop shadow to it, everything works fine and looks exactly as I want it on screen. However, when I save the document as a pdf, a hazy white line appears around the edges of the image.
However, the line is not on the clipping mask itself, instead it is on the square edges of the unmasked version of the image. So when I have 10 masked items on the page with drop shadows, I'm getting 10 faint white squares around each of the images which looks terrible.
I would like to create an inner drop shadow around an image like the one shown here in Photoshop or Lightroom, and then automate it so as to use repeatedly on different images. I know how to make an outer shadow but not an inverse one.
View 1 Replies View RelatedI need to produce a PNG image that will be used as a menu bar that has a shadow effect on the top side only. The image will ultimately be just 1 pixel wide and then be repeated as required to create the right width (length) on the web page. How can I slice the image without getting a shadow effect on any of the other 3 sides?
Obviously the edges of the image must be sharp so there is no banding effect when the image is extended.
I have a mac with Adobe Illustrator and I am just learning how to use this stuff. How to accomplish what you see below - white text that has shading/shadow and is on a white background?
View 8 Replies View RelatedI don't know if this problem was already there in earlier 3ds max versions, but i cant find anywhere on the internet how to create a shadow on a invisible plane like matte shadow could :
View 2 Replies View Related