Trying CS6 for the first time and noticed that I'm having trouble aligning 2 anchor points in a vector shape. For some reason, no matter how much I zoom in, the anchor "snaps" where I don't want it to, which wouldn't be so bad if the anchor I'm trying to align with it snapped at the same place, but it doesn't.
I tried checking/unchecking "align edges" and "constrain path dragging", but neither has any effect on the problem.
CS6 Extended (not beta version)
Windows 7
I need the anchor points to snap to whatever I have my gridlines and subdivisions set to in preferences along with guides I place. When I make the initial anchor points, they snap, but moving them after that, they don't snap. I see the new snap vector to pixel grid, but for the majority of my projects, that will not be used.
I have snap check marked and snap to all selected. Never had this problem before CS6.
In PS CS 6 it used to be possible to draw a shape, like a rectangle, and then use the direct selection tool to select and move one corne of the rectangle. However, in PS CC this does not work anymore. When I try to use the direct selection tool, all anchor points remain selected and so I can't move a single point, just all of them at once. What might I be doing wrong? Did something change in the CC version?!
View 9 Replies View RelatedI am wondering if there is a way to add/remove/redistribute anchor points on a compound shape so that there are evenly spaced anchors along the outline of that shape.I am aware of the "add anchor points" command. But that adds a new anchor at EVERY midpoint between two anchors. It doesn't smartly calculate where to add and where to avoid adding anchors.
View 1 Replies View RelatedI'm just wondering if there's some function to add an anchor point on a path between (exactly in the middle) two anchor points. Like Object > Path > Add Anchor Points, except only between two selected anchor points.
I'm using Illustrator CC (17.1) on a Mac.
I have a shape in illustrator CS6 that I'm trying to edit. When I try to click on a point with the Delete Anchor Point Tool nothing happens however I am able to select the point using the Direct Selection Tool and then remove it using the "Remove selected anchor points" option in the Control palette. Same issue with trying to use the Convert Anchor Point Tool.
View 7 Replies View RelatedI am adding a marker to a map, but I do not know how to align my marker (red) square with the street Laurie Shepway. how I can align the shape with the street in Adobe Photoshop CS2?
View 3 Replies View RelatedIs this possible? I'm in Windows, Photoshop 7.0. I also have a pretty early version of Illustrator, not sure which one.
View 3 Replies View RelatedI am adding a marker to a map, but I do not know how to align my marker (red) square with the street Laurie Shepway. Could anyone please tell me how I can align the shape with the street in Adobe Photoshop CS2?
View 2 Replies View RelatedI was just working with the pen tool in Photoshop CS6, and unexplainable the anchor points changed from being circles to being squares. How I did it or how to reverse it. What with all the keyboard shortcuts it's possible that I accidentally hit the keystrokes to change it (as I have done it in the past), however I have been unable to find exactly why or how I made this change.
Screenshot for visualization of the issue: [URL].......
How can I combine two anchor points which form part of a shape? I know I can drag a marquee around the two points with the direct selection tool. Then, according to the help file, an icon should appear which I can simply click to combine the two anchor points.
Basically my two anchor points sit on top of each other and I want to turn them into a single anchor point.
How to get count of path anchor points? I'm pathing right now pearl necklace with very diferent colors and some are almost transparent so i didn't know how to use any masking trick on it. So i'm pathing, pathing and pathing one more time. And after 1+ hour start to wondering is there any way to know how many path points i'd made?
View 10 Replies View RelatedWhen making a path, if I select a single anchor point and drag it about I can do so freely and smoothly. If I select several anchor points though, they 'jump' a pixel's width at a time while dragging them around.
View 4 Replies View RelatedI am creating a vector shape and I was wondering how to join points. Here is a sreenshot so that you understand my problem better: Or is this just not possible is photoshop and I have to use Adobe Illustrator ?
View 1 Replies View Relatedhow to do selection with the pen tool. I have made my anchor points and connected the path. But, I need to go back and move the anchor points and mess with the angels a bit. I know I need to push CTRL and the anchor points and handle bar to make these changes , but not sure how to make the points and handle bars show up again,
View 4 Replies View RelatedI am creating a vector shape and I was wondering how to join points.
Or is this just not possible is photoshop and I have to use Adobe Illustrator?
I want to make a vector shape from a path. Is there a way to bypass having to define a new custom shape? I just want to quickly add the vector shape to a new layer, but I don't need it defined as it'll just be used once.
View 5 Replies View RelatedIs it possible to align object by 2/3 point using .net? Its easy to do with autocad, but I can't find a way to do it using .NET.
View 6 Replies View RelatedI've just created a load of subpaths with strokes now when i try to move their anchor points the stroke doesn't follow it.
View 3 Replies View RelatedI've been using the pen tool for almost a month now… I'm actually getting pretty good with it now, mainly using it to make my selections more precise… I haven't even bothered to try to draw with it, yet…
Anyway, I was already kind of sleepy when I started to outline the chopper with the pen tool… I got pretty tired & saved what I have done into a PSD. In Illustrator I know it would probably save my anchor points…
When I click on my Path palette, I can see some of my outline… But, the rest of it is filled in with white as a shape…With all of that said, in Photoshop… Is there anyway I can pick up where I left off tracing the nice Harley-Davidson?
Or… Do I have to start all over?
I already tried to use the Direct Path tool & Direct Selection Tool… My anchor points remain hidden.
I have come up with a parabolic curve from a 'Sag Chart' program for calculating wire sag between Utility Poles. I now need to place this curve into my Profile that has the poles laid out in it. I need to make the curve Tangent at each attachment point between two poles. The best I can do as of now is eyeball it in there which will get me the sag distance pretty closly but as any Autocad user knows if it isnt exactly aligned it will drive you nuts. I made a rough sketch of what im trying to do.
View 9 Replies View RelatedI want to get the coordinates of anchor points in every path layer. Can illustrator itself offer me a list of corrdinates X/Y?
View 14 Replies View RelatedI draw with the pen tool a rectangle... When I click with the direct selection tool on the left side anchors, none of them have the corner widget... The right side anchors / both have corner widgets appearing.
I have tried clicking the left-side anchors and converting them to 'corners' both nothing happens..
[Illustrator CS5]
I need to copy and paste path segments in order to create uniform serifs for letters. (For example, specific path curves).
So imagine I have a horizontal segment and a curve segment. I mouseover each one seperately and I can see they have anchor points where I want them to merge afterwards. I drag one towards the other to make them intersect. Then I try to select both anchor points and press CTRL + SHIFT + ALT + J, but it displays this error: "To join, you must select two open endpoints. (...)" Which makes me think I'm not really selecting both anchor points when they're overlapped.
I have the idea that they can't overlap, because my path segment won't detect the anchor point in the other path. They're just visually intersected but not connected.
If I try to join them when they aren't overlapped, they will join but distort the original shape of the path segments. I select them both with the Direct Selection tool, pressing Shift to add the second anchor point to the selection, which won't work when they're overlapped because Shift + Clicking will deselect the anchor that seems on top.
I also tried various shape modes in pathfinder and nothing works.
How can I properly overlap and join / merge them?
(I'm using a white fill so I can see the shape forming as I add more anchor points so I'm sure they aren't joined).
I want to move two opposite anchor points in opposite directions so that they are equally spaced. So if I have one anchor point I want to move right and the other left how can i make sure that they have equal spacing apart without having to resort to rulers. Is it possible to select both points and get them to move in opposite direction together?
View 4 Replies View RelatedThe direct selection and lasso tools keep selecting entire paths. I thought these tools were for selecting individual or small groups of anchor points so that they can be edited. I am using Illustrator CS6, and I'm not sure if I'm doing something wrong or if my program is being buggy.
View 2 Replies View RelatedI'm making a picture and I have a problem - I need a maximum of 2000 anchor points, and I have about 11k.
Seems like I have a lot of unnecessary points, but when I try to simplify the picture gets all messed up. Any other way to fix this?
Here's part of the picture, you can clearly see that a lot of the points don't have to be there..
How do I measure a path between two given anchor points?
View 5 Replies View RelatedIn the above image, I have four symmetrical corners of an ellipse which I'm trying to join together into one ellipse that is perfectly symmetrical. I am trying to line up the anchors perfectly (one corner at time) and then do a join, yet the result is always slightly off. I've been selecting the two points I want to join and using Path -> Average, then Path -> Join to do this, yet as mentioned it's not coming out precise.
View 10 Replies View RelatedI have Illustrator CS6 for mac ox mountain lion. I was working with a vector image and everything was working fine. Now when i try to move any anchor point, it acts as if its not calabrated, for lack of better terms. If i try to move it one way it snaps twoards another, or if i try to adjust the hadles, they do the same. it doesn't follow my direction like it did befor. Its now impostible to use!
View 2 Replies View RelatedWhen using the pen tool in illustrator I see the handles as I create the object, but when I go to modify it sometimes some of my anchor points don't have handles to manipulate them. I went to show edges, bounding box, and clicked the little handles box but it still doesn't bring handles to certain points I want to curve or straighten.
View 3 Replies View Related