I get artifacts when I lighten (dark specks) or darken (white specks) when I use the adjustment brush to adjust exposure on my photos. It would seem to be a big enough bug to get noticed and promptly fixed, unless I am doing something wrong.
View 1 Replies
I'm still using Lightroom 3.
I'm trying to fix the exposure on the TV screen using the brush tool, and it's not doing the job at all. Even with multiple overlays of adjustments it's not changing the exposure nearly enough, and you really can't see the game at all. The white areas of the image on the screen are remaining that way and the rest is just slightly darker and becoming less saturated as well.
I thought maybe LR was just not up to such a radical adjustment and that I need to use Photoshop (which I don't own), but then I tried changing the exposure on the whole photo, and taking it down to zero made an enormous difference on the TV screen, which turned out at the correct exposure, well saturated, with only a little loss of data. This tells me that the data is there in the image--so why can't I get it locally with the brush tool?
After that I tried leaving the whole image underexposed and then using the brush tool to increase the exposure everywhere but the TV screen, but it stayed pretty dark.
Is there a way to specify the begin and end exposure adjustment on the gradient tool?
What I really want to do is apply an even exposure adjustment to the bottom section of an image. There's a hard line where I want the adjustment to begin, so I don't really need a gradient. I know I can do this with the adjustment, but that requires passing the brush over a large section of the image and, of course, being very careful in lining the edge of the brush up with the edge of what I want to lighten. I'd like to be able to put a line across the image and say "lighten everything below this line" by x amount.
I have been using Lr 5.3 to adjust some RAW images. My Develope pane is now missing the pane for White balance, hue and also the pane for Exposure, Contrast, highlights etc adjustments. I don't know how this happened or how to restore them. I am using iMac.
View 3 Replies View RelatedWhen I use the Adjustment brush it turns the brush line red.... even is I change the exposure, tint, saturation, color...etc
I cant seem to undone it... even if i restart program
I have a batch of photos that are adjusted individually for exposure. Now I want to increase the exposure to all of them by say. .10 stop. Is there a way to do this in LR4 without having to adjust each file individually?
View 12 Replies View Relatedwhen importing photos (raw files) to Lightroom they look very different than in the camera. At the very beginning photo looks more or less the same and then, a message „Loading…” is displayed and in a result the photo looks differently. It looks like with imposed dimmer yellow/red filter, higher contrast, much lower sharpness and what is most important, they are all overexposed sort of. The screen settings are as sRGB, ICC profile: sRGB IEC61966-2.1. I am using DSLR Sony A700 that save photos in ARW format, Lightorrom just updated to version 4.3 .
View 1 Replies View RelatedI want to adjust exposure and gamma for many jpeg files. is this possible using a patch ?
Here is a sample of Mafia II 1920x1080 can be used as a wallpaper after I modify it manually.
I read nothing regarding the use of the exposure adjustment panel.
View 5 Replies View RelatedWhen I use the Adjustment brush it turns the brush line red.... even is I change the exposure, tint, saturation, color...it is always red
View 1 Replies View RelatedDoes exposure slider exactly simulate the photographic exposure?
View 3 Replies View RelatedIn Using the adjustment brush with exposure mode active I get a light red/pink color over the area the brush is used, this is not the mask that shows up when the curser is put over the pin. I also can not not make real time adjustment but when I click the adjustment brush to turn it off I can see the changes I tried to make.
View 2 Replies View RelatedMy adjustment brush doesn't want to move away from painting local colour adjustments. I would like to move it to paint local exposure adjustments. What I am doing incorrectly.
View 1 Replies View RelatedWhen I try to use the adjustment brush by selecting the brush, the sliders shown for the brush change the complete photograph, which I do not want it to do. When I use the brush it makes changes. But, if I make a slider change that I want for the brush it actually changes the complete photograph. It has worked properly in the past. I was able to make a slider change and it would only make changes to the area the brush selected.
View 1 Replies View RelatedIn Develop, when preparing to use the Adjustment Brush, first I adjust the size of the brush. I slide my cursor along the Size slider and the displayed adjacent "sample brush" varies in size. Next, I move the cursor into the field of the image. When the cursor crosses over into the image field, the circle indicating brush size changes; it gets larger by roughly 25%. I have been using the adjustment brush now for what seems like 2 or 3 years, but I can't recall it changing size before. Is this normal? 2 screenshots: a) the cursor(sadly not reproduced in the screenshots) hovers at the slider; b) The cursor is moved to the image field, and the Adjustment brush circle has increased in size.
Mac OS 10.7.4(current), Macbook Pro w/ NEC external mon., 2.8GHz, 8GB ram on 2 cores, Catalog on internal HDD, Library on external HDD, LR 4.1, Nikon raw files.
I am new to lightroom - trying to use adjustment brush - but it always is pink regardless of where I set the color
View 18 Replies View RelatedI am using LR 4.2 and I have a question about the non-destructive editor, specifically the use of adjustment brushes. After I work with an adjustment brush and then go on with my editing I can't figure out how to make tweaks to what was darn earlier on the adjustment brush area. With all the other editing functions I can change something and then later make a change. For example, I can set -10 highlights and then later I can change it to -15 highlights and then later change it to something else. With things I have done with adjustment brushes though I haven't figured out the technique to do that. If I select adjustment brush and then click on the area that I had earlier changed with an adjustment brush it doesn't seem to reselect that area so that I can tweak it. Is there a way to go back and tweak areas selected with an adjustment brush?
View 3 Replies View Relatedeverytime i try to use the adjustment brush it crashes lightroom?
View 12 Replies View RelatedWheever I try to use my adjustment brush in LR 4 I get a red tint as I apply what ever adjustment I'm trying to do.
View 1 Replies View RelatedWhen I select the adjustment brush and paint across the image no changes are made. I have tried moving the sliders to the extremities but no effects to the image are made.
View 2 Replies View RelatedI have a couple questions regarding adjustment brushes in LR 3.6 .
1. I recently found out there should be Iris Enhance, Skin Soften, etc. brushes in the presets. I can't find them under the adjustment brush. I've tried going to Edit->Preferences->Presets->Restore Local Adjustment Presets as several others have suggested but it doesn't appear to do anything.I have found these files where I've read they're supposed to be (../AppData/Roaming/Adobe/Lightroom/Local Adjustment Presets) but I can't find them in LR unless they're somewhere other than the Adjustment Brush panel.
2. Also, 'O' turns the mask overlay on and off as it should. I have 'on' set to red but for some reason 'off' is set to blue and I have to desaturated it everytime I turn off the overlay mask. How do I change the "off" state to be no color?
My adjustment brush is not working. I can select it, move it, etc. but it makes no changes. i.e. I want to whiten teeth, I have tried to adjust exposure, brightness, contrast even make them green nothing works. But I can move the brush, it shows up as if I had made changes when I click the done button and reselect my adjustment brush but no change has been made!
View 4 Replies View RelatedIn Jeff Schewe's book "The Digital Negative," I read that Lightroom 4 comes with Adjustment Brush and Graduated Filter presets. I use Camera Raw (CS6), which doesn't come with presets. Looking for the settings for each Lightroom 4 preset so I can create the same presets in Camera Raw?
View 1 Replies View RelatedI am fairly new to Lightroom, and the Adjustment Brush tool specifically, and I am having some problems with it! I have watched tons of tutorials on using it, and it seems relatively easy...although when I go into my program and attempt to use it, nothing happens to my photo...say if I wanted to adjust the exposure on the face of an individual, I will go in and select the tool, decrease the exposure, make the brush and feather the size I want it, and when I go to "paint" the area I want altered, nothing happens? The pins appear as if to show me that's where I started, but then no change happens to the area I attempted to paint. Do I need to select something somewhere to be able to actually use the brush to paint?
View 3 Replies View RelatedSo why in the world would I update Lightroom in the middle of a job.?
Before I was able to do in and touch up shadowy areas using (K) adjustment brush, but now it doesn;t seem to work. The radial brush does a good job for a defined area but for SPOT touching I have always used the the adjustment brush?
Is there a setting or am I missing something or is this a bug?
I just installed the LR4 upgrade (MAC). All other functions seem to work, but when I select the adjustment brush, LR quits unexpectedly.
View 2 Replies View RelatedI recently took some Milky Way photos and was attempting to process them in Lightroom. Many of the effects I am using are hardly doing anything. I'll use clarity for an example.
I typically use the adjustment brush to add effects like clarity soley to the Milky Way. I find a setting of 40-60 is usually sufficient. Sliding the scale from -100 to 100 is DRAMATIC, making the Milky Way overly "pop" in a disgusting, artificial manner.
However, on my most recent batch when I applied a clarity of 50 I could hardly tell. Sliding the slider from -100 to 100 had a very small difference. Other effects are behaving similarly.
When I go back to my older photos the brushes seem to work. However, any of these new photos (which have various exposures settings) all behave similary in that I just can't get the effects to do much. The originals of my older photos and my new photos look comparable.
How do I get the adjustment brush to "paint" white? I have tried the color panel, but nothing works.
View 2 Replies View RelatedWhen I first started using Lightroom, the adjustment brush worked fine. Now, I will select the adjustment brush, click on the photo I'm editing, and a red circle will appear depending on the circumference I chose. If I look at the thumbnail in the navigation sidebar to the left, the red circle appears as a black circle in that photo. In addition, none of the sliders will work with the exception of the exposure adjuster. However, the effects of adjusting the exposure only appear in the thumbnail in the navigation sidebar; the main image will stay red in the area selected.
View 1 Replies View RelatedMy adjustment brush in LR 5 suddenly quit working. It paints a white smudge instead of doing what it should. Even with the latest update, Ver. 5.2, the results are the same.
View 2 Replies View RelatedI downloaded the trial version of Lightroom 4 onto my Macbook pro and when I try to use the adjustment brush the cursor that normally turns to a brush when you hover any part of the photograph only changes at the very edges of the picture. When I move the cursor towards the center of the photo the cursor changes back to an arrow and I cannot make any adjustments. If I start an adjustment at the edge of the photo I can drag it into the center of it, but I cannot release and then do any further painting in that region. At the point where the brush icon changes the cursor becomes a small arrow that points to the edge of the frame and if I hold down the left mouse button and move to the transition line it becomes a double facing arrow, I can then drag the area I can work in to make it even smaller, but I cannot increase the area.
View 1 Replies View Related
