I'm exploring the 4.3 trial and have got as far as importing a few photos, then when exploring the various dialogues one of the photos has acquired a red cast and is dimmed. I can't find what I did to cause this and can't find a way of undoing it. I have done ctrl-Z all the way back but its still there.
View 21 RepliesI shot an event for a couple (a reception) and I didn't have my gray card so I set my Canon 5D mkII on auto white balance (shooting with a Canon 24-70 2.8 and a Sigma 85 1.4). As you'll see from the two example photos - the shots taken in the venue lobby looked fine, but the shots from inside the event itself were amazingly saturated. The room had a ton of very bright uplighting in purple and pink - the shots looked fine in the viewfinder, but once I brought them into LR4, there was a nearly complete purple/pink cast over everything. Setting the white balance in LR to auto, tungsten, flourescent - nothing worked. Adjusting the temp sliders - only slightly better. Reducing vibrance and saturation useful a little more, but I'm really having a hard time finding a fix!
View 6 Replies View RelatedI am using Lr 4.3 and want to import vacation photos. Lr says they have already been imported but I can't find them even if I search by photo name using Explorer. Should I just uncheck the box not to import suggested duplicates and import again? I have over 4,000 and don't want them on the hard drive twice.
View 3 Replies View RelatedI imported photos from a shoot, and after getting them into lightroom I realized the year was off in the camera. My import preset uses the year as the first part of the file naming convention. So now I want to rename the files by correcting the year in each one. Is there an easy way to do this? I suspect that unless I go through lightroom somehow, the catalog won't know where they are if I change them.
View 7 Replies View RelatedWhen importing pics from a particular folder this morning, I must have accidentally asked Lr to import my photos from my desktop, but because all subfolders are listed, it's imported 27000 or so images from all over my computer. This is an absolute disaster because it's not just taken a copy, it seems to have transferred them or sucked them into Lr.
How I can undo the import?
I am using Lightroom 3.5. I imported todays shoot into Lightrooms catalogue. They were converted from raw to dng. But only when the import was finished did I notice that all my collections and photos were missing. Before I went to my most recent backup I went to my catalogue and double clicked Karls catalogue.lrcat. This restored all my collections and photos, except for todays import.
When I open Lightroom I always hold down Alt so that it opens my catalogue rather than creating a new catalogue, but I must have not pressed Alt hard enough or something because I suspect Lightroom did in fact create another catalogue. I did a search for .lrcat in windows explorer and found my catalogue and 3 backups on my external drive, however I also found Lightroom 3 Catalog.lrcat in C;/Users/Karl/Pictures on my laptop.
How can I retrieve todays import and put it onto my catalogue?
I have several external drives that are too small to hold my entire photo library (and one large enough to hold everything).
I'd like to select certain photos from my catalog, say those with attribute >= two stars, and back them up to one of my smaller drives. It's important I back up the photos themselves - with or without a catalog - as the goal here is extra security.
Is there a way I can do this inside Lightroom?
LR4 in import mode shows photo files that it has labeled with a leading "_" in a muted format and states they have already been imported and will not allow importing. I have been unable to locate them by file name or date in LR or using file searches. How can I find and/or import them? Do I have to rename all the files by deleting the leading _ in the file name?
View 1 Replies View RelatedProbably a very simple problem, but I have just installed the program for the first time and do not yet know my way around it. But when I pull photos in from my digital camera directory, they immediately display a warmer orange hue. However, I have not touched any of the settings at all. If I immediately export the photo, it matches the original on my HD. So there seems to be some kind of calibration problem with the real jpeg colors and the colors on screen in Lightroom. What can I do about this?
FURTHER DETAILS:
When I hit IMPORT and have the photo selection window come up, all the colors are fine. When I select a photo and actually import it, the colors are orangey. Where the heck is this change of color coming from? All I have done is install the program! I haven't adjusted anything.
I have a Lightroom catalog on each of two different computers. Each of the two catalogs have imported photos from the same "Photos" folder on a server.
There is one main folder with hundreds and hundreds of sub folders.
The one catalog is showing 226,186 photos and the other catalog is showing 218,732 photos.
I've tried syncing the computer's catalog that has 7,454 less photos imported than the other computer but I always end up with two different totals on each computer. Very frustrating since both catalogs must match.
One computer is a Mac and the other computer is a PC (not sure that should make any difference).
Lightroom 4.4 on a Win 7 computer will not import visible jpeg photos from a chip because the files can not be read. The same photos import fine on another Win 7 computer using LR 4.4. Lightroom has been importing fine up til now.
View 2 Replies View RelatedI'm trying to create a smart collection that contains the last X (say 1000) photos taken/imported. Not sure what rules to use
View 2 Replies View RelatedHow do I get the file names for the photos I imported into Lightroom 4 to show up.
View 2 Replies View RelatedI have saved my photos in RAW format and imported them into Lightroom. I have then made changes to them and exported them from Lightroom as JPEG files. However, when I go to a printing kiosk and get the photos printed, they are all darker than what they displayed in Lightroom. What do I need to do to be able to print accepable photos?
View 3 Replies View RelatedI recently had to format the ext drive that my photos were on. after doing that i put all those photos back. i opened Finder, clicked ext drive titled Photos and placed the parent folder, My Pictures there.
When I now look at the folders panel the parent folder is Photos and then My Pictures. in older catalogs the parent folder was always My Pictures. there are no ?s anywhere. wondering whether i put the photos back in the right way or right place.
Even though i select a specific folder when i now import photos they go to a completely different and new folder and seemingly to a new drive titled Photos. that is also the name of the drive that all the photos are on. when i click "show in finder" all images show the original drive titled Photos. so when you look at the folder panel it looks like there are actually two drives titled Photos and the imported photos are now going to the second Photos drive. in reality there is only one drive titled Photos.
i can't get imported photos to go to the correct drive.
I can't open any of the recently imported photos in LR3? When I pull them up from my external hardrive it tells me the photo is allready imported and wont let me do it again. I can open older photo's just not recent ones.
View 1 Replies View RelatedI've noticed that if I use Lightroom to import photos from my iPhone, it fails to recognize that it has already imported them. I don't see this behaviour when imporing from my Canon. How do I get LR to recognize what it's already imported?
View 6 Replies View RelatedWhen I go to import and look at my photos (previously edited in PSE9 and saved as a jpg on an external hard drive) they look great. But when I import them some of the photos look weird - too bright usually or the colour has gone all funny. I've deleted them out of LR and then tried importing them but it happens again. Only on a certain few. They are jpgs.
What is happening? In finder on the mac they look normal too. under Import on LR4 they look normal. It's just once they are imported.
I just got Lightroom. I imported 800 some new pictures on and started to develop them. Then, I went into Picasa to check some older pictures and it captured all the new pictures and since then, I cannot develop my pictures in Lightroom. I can still see them in the Library, but a message appears above them saying they are missing.I can't. They are on my hard drive and in Picasa.
View 4 Replies View RelatedI have Lightroom 5 and a Mac computer..Uploaded photos via card reader to Computer.Lightroom Opened but would not show previews. - said show source - would not open the previews on the imported photos
When I tried to activate the source to upload my photos - all when blank after 1 second of showing information (Photos) that were the previews. - then went blank.I stopped the process and ejected the card correctly through the finder. Thought I would try importing via image capture.
This was also a problem as the previews only showed as a flash of a second.I also notice that for some reason Lightroom 4 keeps on opening when importing photos and not Lightroom 5 - Though Lightroom 5 opens up when I edit other photos.
I use LR 5 and I cannot seeme to get my location data imported when I import my photos. The data is there because it show up in PS Bridge but it is not in the metadata record in Lightroom and the map module cannot find it. I looked through all of the setting and I found nothing that would preclude location from being loaded.
View 1 Replies View RelatedNormally I import as RAW, and then convert to DNG; today is first time that I've Imported/Copied directly to DNG.
Using LR5, I "Copy to DNG" a bunch of images from my CF Card, that I shot over the weekend. In Grid view, under the Histogram, I noticed the icon "Originals without Smart Previews" had a 1, "Originals + Smart Previews" had a 0, "Smart Previews" has a 0, and "Missing" also has a 1 next to it. Admittedly, I forgot to check the "Build Smart Preview" check box, so I Library -> Previews -> Build Smart Previews. After the process finished, I now have "Originals without Smart Previews" - 0, "Originals + Smart Previews" - 1, "Smart Previews" has a 0, and "Missing" - 1. When I go into Develop module, under the Histogram I also see "[!] Photo is Missing". When I Right-Click and select "Show in Finder" it takes me straight to the original, in the correct folder location that I Copied/Imported into. I've also done "Find All Missing Photos" and re-synchronized the folder. Nothing has changed.
Some of my imported photos are showing blank in preview mode before I import, reading Preveiw unavailable for this file. Does this mean when I import they wont be imported.
View 1 Replies View RelatedHow do I export all the photos I imported back to their original folder just as they were, they haven't been modified, adjusted etc. I imported them by mistake.
View 6 Replies View RelatedI use Lightroom 3 and recently it has started making multiple duplicates of recent imported (and exported) photos without me doing anything.... what happens is I import a batch of photos, make adjustments to them, export them... close lightroom.
Then when I reopen lightroom, the previous imported set of photos have all been duplicated and sometimes there is more than one copy of each photo.
Is there anything I can do to stop this? I'm pretty sure I didn't change any settings to make this happen.
I am a new Lightroom3 user trying to prepare a portfolio for a juried show. I have imported photos from CDs and a flash drive and have created a Collection for my portfolio. When I click on what seems like a random grouping of photos in the collection (in the Library Module), I get the error message "file xxxx is offline or missing", even though the image is showing correctly. I am unable to work on any of these images in the Develop Module.
View 3 Replies View RelatedWhen attempting to import photos from memory card, I see the preview, however when I select the files to import, I'm getting this message:
The following files were not imported because they could not be read. (221)
Files are in .cr2 format as always...see screenshot...
I am using Photoshop CS3.
My wife gave me some old photos that have turned Orange over time.
Do you know how to get back to the right colors.
The layer is turned off but the table is still turned on!
I’m wondering how come the layer in which the table exist is turned off while the table is still turned one!
The screenshot and the file are attached.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I imported my photos from my camera to adobe bridge and they looked great. I had no problems saving them in the file folder that I had chosen and when I open them in Photoshop CS4, they look awful. They are all pixelated and broken up and I really don't think my Nikon D90 had anything to do with this and I am very frustrated. Is there a setting that I am missing that could be the problem? What steps can I take to make sure I haven't missed anything because I find it difficult to enhance photos that look so bad when opened in PS.
View 7 Replies View RelatedHow do I ####add new photos to groups of pictures with specific tags? - these tags were used to organize pictures in Elements 5. As these groups are extremely important to my organization (100s of pic) I am not very happy with Elements 11
View 4 Replies View Related