TRANSPARENT IMAGES.jpg
When I paint a picture in a any palette (TPX or C) , and with less than 100% color, and make convert to bitmap with transparent background, he converts the entire image transparent.
I need it so that there are around and not make clear the image. As the link.
I have searched everywhere, but all I ever find is people saying TRANSPARENCY.
For this web project we need cropped images with no transparent background, no background at all.
I need to strip my current image of its background color so that the background color on my website goes thru my image. In other words I need a transparent background for my image.
I have create a new layer that is transparent, but the background color on my website does not go thru it. The background color of this image appears to be grayish not transparent.
I’ve been looking for over 2 hours now how to do this and I’m still no better off, however I have learnt a few tips here and there,so I’m totally new to gfx stuff but i know how to make an image transparent.
i want the logo on the image but i dont understand how too?? ( with out getting all the grey and white boxes (around the logo on the greenhouse pic which goes white once i save it) i want the image background to still be there.
How would i make an image transparent.. for example take this image.. how would i make this image transparent.. would i have to cut around it.. then paste it in to a transparent layer?
View 2 Replies View RelatedHere is a photo that I am trying to duplicate the techinque from. I have figured out how to tint my original photos, but I can't figure out how to layer them so you can see both, without either of them becoming faded. I'm running CS6. It seems like it should be so simple.
View 7 Replies View RelatedI am trying to import a photoshop image into a powerpoint presentation but it looks like a box with the image inside the box. The box is the color of the background in the image file. I would like to know what I would do to import the file so only the image in the file is seen with the background color eliminated.
View 3 Replies View RelatedLoaded 2013 and did a normal insert image a simple line diagram a BMP file and can not get it to be transparent, tried transparency etc when plotting comes out a solid object and adopts the layer colour.
Works fine 2011?
What I want to do is cut part of a photo out and place it onto another background.
I have been trying to do this by: using the magic wand tool to cut out the background of the image I want to move. Then I save that as a .png file. I then open the image I want to use as a background and (after copying the .png image,) I paste the .png image on top of the background.
At this point, one of two things happens: I either get the first image on there with lots of backgrounds showing through faces, etc; or I get the image pasted onto the background but I get the box with the little grey squares and I cannot see the background through that. I have tried playing with the transparency of the background, but then it still blends through the original images.
I've got all these great digital backgrounds that came with my studio set up and danged if I've been able to use a single one. (I don't have photo shop because its above my head and I really don't have the extra cash for it right now.)
I have a question about the transparent background. I want to make the background of the following image(its a part of my image) transparent but when i use the magic stick the teal color is gone also.
Attached Thumbnails.
I am working on an anime picture. I want to have two of the same images, one larger, with no background, and transparent. The other will be just the image. I have that done, but how do I get rid of the checkerboard pattern, it's difficult to work with it in the way. Also, both images move together, how do I stop that from happening?
View 6 Replies View RelatedI just purchased the new software and don't have any experience with this program. I'm trying to find out if I can make the background of images transparent.
View 1 Replies View RelatedIt looks like merged-image-data in PSD files contains RGB data which is blended with white color (based on transparency). Is that correct for all versions of Photoshop/PSD? Can I disable it or change that color?
View 7 Replies View RelatedI love refine edge in Photoshop CS5, but parts of my image go semi-transparent. Is there anyway I can fix this issue after Ive created my mask?
Ive checked out some videos (about 6 mins 10 seconds in) PW124 - Photoshop CS5 Review - Refine Edge Tool - YouTube
The guy seems to be painting over some layer or something with a black or white brush and it brings it back in correctly, but I cant replicate this.
Im making a website, and im not that educated on the new photoshop. I need to make a few buttons, and the main logo have a transparent background.
View 5 Replies View RelatedI created an oval logo from scratch. Its a gif. I saved it using the "save for web" option under the File menu. I use this logo for our website. As long as the logo is placed on a page with a light background it looks ok. But when I put it on a page with a darker background, the image is outlined in white. Its getting very frustrating. This is happening with any image that i give an transparent background.
View 1 Replies View RelatedRunning Designer pro 6.1.2.13287 on Windows 7 Home Premium
I'm probably bumbling around and buggering up the export of png formatted images, but it appears something besides transparency is getting exported as backbround.
I do `Select all' then export to png.The poorly drawn green arrows were added in photoshop to show the area I'm talking about. The xara document which is apparently also getting exported in some way.At least certain other tools see a black background in that area. Not all tools have that problem with the image. For example; photoshop sees only transparency there.
But when I browse the exported *.png files with `Epson print CD', it sees black in that area as illustrated by the screen grab below.The first two images look clean as expected (I'll explain in a moment) but the third (the one that hasn't been cleaned in Photoshop) shows the black background in that area.
The first two were cleaned up in photoshop and now appear clean as expected.So to get a usable image for import into Epson's tool I must:
1) Export as PNG from Xara
2) Open with Photoshop and run thru a procedure where anything outside the outer blue ring in the image is deleted.(Even though PS only sees transparency, if I select everything from the blue ring outward and delete it, saving back to png, then Epson's tool sees transparency there)
3) Import into `Epson Print CD' and print the graphic to a printable DVD.
How can I skip the second step? That is, how can I get a clean export in step one? What is it that some tools are seeing as black background?
Is there a way to hide the checkerboard while editing? I need to be able to see through the clear areas whilst positioning the object,but i cannot find anything on Google.
View 5 Replies View Relatedhow to make only certain areas of a stock images transparent.
View 3 Replies View Relatedlet's say I have a page with 6 images and 6 captions. is there anyway to crop out more than one at a time and save them? Currently I have to crop out all but one, then save that one, then reload the image and crop out another one and save etc over and over. is there a better way?
View 4 Replies View RelatedI just learned how to make the background of my images transparent and am learning how to use layers. I am trying to save my pictures to picasa and photoshop so they are backed up and I can easily access them from any computer. I noticed that some of the pics are showing up all black. It's like the colors are inverted almost. I can kinda see the image in white, but mostly the whole thing is black. I noticed the same thing happened when I tried to open some of the images in paint.
I checked to see if they are all the same file type and they are not. Some are gif and some are png.
Also, some of my images won't open in windows photo gallery. They open in a blank web page. I originally go to my pictures and find them there, but when I click on them they open a page in IE instead of windows photo gallery so I can't crop them or anything.
I am trying to work on a project where I print silhouettes or simple images on vintage sheet music to use as art. I need to be able to take them to a print shop to have this done and I can't do that if the images show up black or won't open in a regular program.
I am attaching a pic that saved black like I talked about and a pic of what it is supposed to look like.
I have been using Gimp for a lot of "tile based" images, which feature layers composed of several "tiles" pasted into those layers. However, I just recently started creating transparent tiles, and pasting them.
One of the strangest things I have run into here is that I don't seem to be able to move my selection ( Floating Layer? ) if the opacity on the source pixels is 0.25 or less. Specifically, I do not get the usual "drag box" when I hover over the transparent pixels. Instead, I get the "anchor box" ( which seems to crop the pasted area before anchoring ). I tried this on a composite image with some more transparent pixels ( 0.25 ) and some more opaque pixels ( 0.26 ), and the "drag box" appears only over the more opaque pixels.
Why this might be happening? It could be that this is just context-sensitive cursor behavior which varies on transparency, and if so, is there another way to move the pasted selection?
Whenever I have a selection in an image, I can move it around all I want and wherever I want until I anchor it, but when I open that same image again after saving it and then select a part of the image, I can't get my selection to move. Rather the entire image moves and leaves transparent pixels. How do I move selections and not whole images without leaving transparent pixels?
View 1 Replies View RelatedIm sure there must be something im missing here with the PNG export settings. I like the way the new export window appears but I cant figure out how to export from Draw to a PNG with a transparent matte of a color picked color.
How I did it in X4 was to chose to export to PNG, and when the window appeared to select a color for the transparent area, a color picker was used. Whatever I do with X5, i cant do it .
I am trying to check and un-check options for Transparent Interface, but only menus and color palette became transparent. Dockers are staying opaque.
Is it me, my computer, or a bug?
CorelDRAW X6, updated, HF1
Win7, 32bit
CorelDRAW X6
when importing a - otherwise well displaying - transparent png image, it's becoming total blank in Corel. An example
[URL]
How do you make a JPEG transparent so that the negative white box surrounding the image allows the background color to come through?
View 7 Replies View RelatedUsing CoreDRAW, so I drag a PNG from the web ([URL]......) into CoreDRAW. The image shows up perfectly, but the background is black. I know it is a transparent image because the background is white on the web page. I want to make the background transparent.
Also, after the image is transparent, I want to extrude just the visible part. Will I be able to just "Convert to Curves" and then extrude?
I have a question about circles can you make a circle with a color in the middle fading out to transparent? so basically i want say a purple circle then towards the edges of the circle transparent.
View 15 Replies View Relatedhow can I design a new pattern with transparent background? I can only create patterns with a white/intransparent background.
View 14 Replies View RelatedI am trying to make a gradient to go from "transparent to white" example: I have a circle that the center is transparent, but I want it to go from a transparent to a white. I can't seem to figure out how to do this.
View 2 Replies View Related