How to make the colors in the color bar look right. I do screen printing and use a lot of halftones (shades of the same color).
In X5 for example, 40% black shows as solid black on the color bar as with any other percentage. Also, is there any way to have the buttons (side bar) look like the ones in X3?
Is it possible to transfer a colour pallet from X3 to X5?
View 3 Replies View RelatedWhen I try to install Corel X6.1 I downloaded from Corel's site, I can not install because I see no option to continue the installation.
Configuration of my PC: i7, 16GB with Win 7. There are Java and NetFrameWork installed.
I tried installing the X5 and had the same problem.
I recently installed GraphicsSuite x6 (with SP4) on a new Surface Pro 2 tablet running on Windows 8.1. My command bar buttons are not displaying properly. Depending on whether I have the open on the tablet screen or an external monitor, the toolbar buttons will not be displayed. This also affects some (but not all) dockers. For example the buttons and labels on the Align and Distribute docker are not displayed, regardless of which display I am using. This issue affects both CorelDraw and Photo-Paint.
View 3 Replies View RelatedIs there a way to apply a color to selected objects without having to search for the color in the color palette. So say if I am working with an image that has multiple colors but want to use only one of the colors in that image, is there a way to apply it without having to create or add it to the palette.
View 3 Replies View RelatedI still use Corel Draw 12 and my question is is there an easy or automatic way to make the outline color of an object the same color as the fill color? I do it the hard way of trial and error until I get the right outline color from the color dock/pallette.
View 10 Replies View RelatedI'm having a major issue here, I use custom colors (created in my custom palette), X^ used to hold it very nicely, even in PDF exports etc.
Now - with the latest update, X6 "forgets" the custom colors, it resets it to default color, I have to manually set every object to the custom color all over again.
Is there anyway to transform a 4-color CorelDraw picture into a 2-color one at reasonably good quality?
The problem I met is at the galley.
I could, or might, only be able to get a 2-color printer at reasonably good price.
The original design is 4-color. But the actual detail is not very important.
They are book covers, which only need to protect the book.
The exported picture is shown below:
To create 2-color artwork from any colored vector clipart I used to be able to:
import colored clipart convert to CMYK if needed select entire graphic and create new styles with 2 parents change (edit) the colored parent to a named Pantone spot color (the child colors automatically become percentages of the Pantone spot color) "find and change" the remaining CMYK to Grayscale, and then back to CMYK (this ignors the spot color and converts the annoying rich blacks to percentages of K) export to a PDF file--which when imported into, say, InDesign, will separate on the K and Spot Color Plates only, in all its glorious shades of gray and tints of Pantone spot color.
I'm completely at a loss on how to do this in X6, and I'm on a short deadline.
Is there a way that we can have the default color pallet to work like X3 where you hover over the color and it would say 80% Black? In X6 it give you the RGB coding instead and only shows you 80% Black when you have it fully open to show the color names. Is there a way that part can show up like X3?
View 3 Replies View RelatedWhat does the CV mean at the end of a PMS color and what is the difference between C and CV? I know it's a coated color.
View 2 Replies View Relatedi accidentally removed the color pallette at the bottom of the page that has the colors from that specific document, how to get this pallette back
View 5 Replies View RelatedWhen I print the same file out of X6 & X4 the color is much different. I know this has to do with color management but now sure how to correct. The color coming from X4 is much better.
View 2 Replies View RelatedWhat is the default color management setting (all the setting) that Coreldraw X5 is set to after installation. We had a tech guy from our local printer chage the values and now we only have problems
View 5 Replies View RelatedYesterday CD upgraded itself as I turned it of to go home from work, when starting it the day after all seemed to be as it was util I should print out a color separation. Suddenly I now have to check every color that I want to print out, the only color that doesn't need to be checked is black(cmyk black) all pantoen colors have to be checked.
Why is this changed?
Can I set it up so all colors is to be printed as default?
Also having some trouble in exporting to EPS, when exporting all seems fine, but the file appears to be empty, the next exported files seems to be fine thou. First export is always empty.
For our sublimation printing, we use Corel X3,
For some time we have problems with the colors.
As standard pallette we use Pantone Coated, but after I export a .cdr to .eps some colors are replaced with a new color with the same name, when I open it in Coreldraw again afterwards. The colors are placed in a new user pallette and have different CMYK values.
How knows how to keep my PMS coated pallete?
Color nodes are blue by defaut. When I draw something with blue, I would like having red nodes, or another color. I guess there is a set-up for that, but I realy don't find it.
How do we change nodes color ?
On the bottom page the outline box has a white vertical square/line on the right of it. Since this happened my outlines are transparent when place on top of other objects. How can I fix this to get it back to soid colored lines.
View 14 Replies View RelatedI have a vector graphic with two colors and zillions of pieces. I am trying to group by color and can not figure out how to do it.
View 3 Replies View RelatedI must have clicked on something that has caused there to be no color in a design or text. It looks transparent. In the lower right corner it shows to be the correct color and outline but it does not show up on my screen.
View 3 Replies View RelatedI have corel on 2 different computers and all settings the same however the colors still come out different on screen and when i JPEG..
CURRENT COLOURS PReferred colours
Where can I find RAL Color palette (.cpl) for CorelDRAW?
View 10 Replies View RelatedAdding the PerfCutContour color swatch in CorelDRAW? Having trouble adding it, I keep getting an error saying that color already exist in the pallet....when it is not in the pallet.
Using VersaWorks and CorelDRAW X5
We are facing a strange problem in Corel Draw X4 and X3.First Corel Draw X4 corrupted its color pallet so that all colors were shown completely wrong.After that I tried to instal Corel Draw X3 which seemed to work ok. After a while when opening some older files, Corel corrupts these files. After I have opened them they are completelty empty and the file size is something like 10kb.
View 11 Replies View RelatedI know there must be a way to change the colors of multiple objects without doing each one manually. But I am not finding the instruction. Say I have 17 parts of a drawing that are blue, and decide I'd rather have them blue/green.
View 5 Replies View RelatedI'm just checking back in to see any updates on how to quickly and easily clear all color styles in a document. I've tried the following:
Os's nifty color styles patch (comes with recentfilesDecBeta macro)
saving as CMX (that bites because it converts underscores to objects and other mean things)
manually (takes too long and sometimes replaces colors in current document then save settings as default (I not like this).
When I open or import a DWG into CorelDraw X6 it changes the colors (see image).
I tried changing the Color Management Settings to Minimal Color Management which is suppose to preserve the original color when opening, importing, and pasting, but that doesn't work.
I'm working with CorelDRAW 12 and am having trouble with a frustrating issue. If I create a logo from my work computer, using pantone colours and everything, the colours are really rich and vibrant. When I open that very same file in Corel at my house computer, however, all the colours display in a pastel, watered down way.
My home monitor is much better than my work one, and if I export the file from work into a .png it still displays as it should, rich and vibrant, when I open that on my home computer. However, if I leave the pantone colours as they are but export it from my house... it then keeps it as the pastel, watered down version on every single monitor. How do I fix this? Is this a monitor issue or a CorelDRAW problem - have I somehow not set up my Corel the same at home?
My printer is asking me to name the dieline color "dieline" - I think that I finally figured out how to do it, but it I doesn't seem to hold. For instance when I open the PDF file, the color name is now called PMS 377.
View 7 Replies View RelatedSo in document color settings in color management, should the primary color mode be RGB or CMYK? I only print inkets and never send stuff out to a regular printer.
should all color settings be at RGB if the option is offered?
I'm writing a coursework about banks and need to insert a picture, which shows the globe in unrealistic greenish color. Someone told me about Corel, that it has eyedropper and fill tools. But I really feel missing with all those complicated tools and get tired of trying to understand what is what. How to replace the greenish color of the globe with blue one, so it looks more like of the same color as the bottom book from the stack. The rest of the things on the pic should remain their colors.
Here is the original picture that I need to edit [URL] ...