CorelDRAW Graphics Suite X5 :: Arrowheads Pointing Wrong When Exporting As EPS
Aug 29, 2011
I'm using CorelDraw X5 to generate the eps file for my thesis, written in LaTex. When I draw a vertical arrow, an then export the draw in eps format, the arrowhead is pointing the wrong direction (left - right and not up-down), and this is always the case. If I open again the .cdr file, everything is correct.
I had the opportunity to try also CorelDraw X3, and the same behavior appears.
Have you ever experienced it? It is actually quite annoying because I have to fix all the eps images containing vertical arrows with ink scape, but it is time consuming.
View 7 Replies
ADVERTISEMENT
Sep 25, 2013
I import dxf file created in CadKey or SolidWorks. I have done this thousands of times but all of a sudden they do not import in the correct orientation x/y plane. They appear to be importing on the edge. I have gone back to old dxf files that have worked perfectly in the past and they no longer import correctly.
Have I, unknowingly, changed some setting on Corel that effects the import of dxf files?
View 1 Replies
View Related
May 24, 2012
I have been using CorelDRAW 12 and 13 for about 7 years. I have a new problem. It's only become apparent recently, and I think it could be related to my recent change to Win7 from XP.
When I publish a file to pdf the colours do not translate properly. I use a lot of pantone colours, as I do fashion illustrations and textile designs, and for that reason it is important that my clients receive accurate colours.
Lately the colours have been coming up wrong. For example a green/blue aqua colour came up as a very darkish sky blue colour. Brown looked navy. All colours are either off or completely wrong. If I print from the cdr file, however, the colours are fine.
View 10 Replies
View Related
Jan 20, 2013
Dimension Issue while Exporting.png
Why am I not getting Exact and Accurate Dimension while Exporting the file to PSD Format? Do I need to Enable or Disable something?
View 8 Replies
View Related
Jun 30, 2011
I have recently installed X4 after using X3 for a number of years, and it was working fine until suddenly the color pallet has changed to harsh very bright almost unreal RGB-like colours. It is distorting all my work as I cannot see real colours, especially in Photopaint, so impossible to color edit.
View 2 Replies
View Related
Sep 13, 2013
i create a spot color (lab color management) when i create the pdf the spot color haven't the name setting in CorelDraw. If i export eps it's works greats! i don't convert spot in cmyk i want spot color in lab! i use onyx production house and it want spot color lab to renoze cutcontour or spot color as white ink.
View 3 Replies
View Related
Aug 29, 2011
I just bought a HP Designjet Z3100. And I can’t get the colors right. Everything looks great on the screen but then I print I get this ugly strong light green color. I have really tried different settings without success I have also tried X4 and X5 with the same result.
Everything is ok if I export the file to PDF and then print, but then I print from the cdr file its get very ugly.
I have the same problem with other printers but then I change the printer’s own settings to Saturation in the color settings.
I have uploaded some files to: [URL] ...
CDR file = This is one example of the files I can’t print.
PDF output = The same file as the CDR that looks good then I print it.
ugly green = This is how the print looks like (I get these colors then I use my Nitro PDF printer)
View 14 Replies
View Related
Jan 23, 2013
When I'm printing on CorelDRAW X6, it show me the wrong size and orientation , everything was perfect on CorelDRAW X5 and I'm fully updated. What can I do?
View 3 Replies
View Related
Dec 1, 2011
How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
View 1 Replies
View Related
Jul 12, 2013
I don't know if this is just a Windows 8 compatibility issue, but when I save an edited photo it is stored in whatever orientation I opened it. Also the thumbnails only show the original imported image, not the edited image.
For instance if I took a picture in a sideways orientation on my smart phone then opened it in PPX5 I can rotate, edit and save and it will show the original image in a sideways orientation. If I post the image on Facebook it will show up sideways. If I put it on a forum it may look okay but people with iPads and iPhones see it sideways.
View 2 Replies
View Related
Dec 3, 2012
If you take blend tool to gate one color to other or same or gray scale it give correct result. But if you use New color style and new gradient it show wrong effect in CMYK.
View 6 Replies
View Related
Nov 17, 2011
what I want to achieve is a jpg image, with one of my vector designs over the top of it, for use on a website.
This is how I have been doing things so far. Opening cdr file, containing the vector that i wish to use importing the image, then reducing its size positioning the vector over the top of the image adding perspective to the vector selecting both using the pick tool (dragging the selection square around both items) then selecting export for web.
This has worked for dozens of pictures so far. The problem is, my exported file is way too big, at 900kb. However, if I just export the image, it is 39kb. If i just export the vector, it is 25 kb. Yet when I export both it comes up at 900.
View 3 Replies
View Related
Jun 1, 2011
We are using Coral Draw 11 and have to get a lot of our data from Excel. Currently we are copying and pasting the information in, but this is very time consuming. Is there a faster and simplier method?
View 4 Replies
View Related
May 22, 2012
The best way to export Corel Draw files to a format that other non-Corel users can easily manipulate? I have had trouble saving as or exporting to other vector formats in the past. I use very large files with imported jpg graphics, etc.
Also, do any of the effects/actions (drop shadows, power clipping, grouping) that we use in Corel affect the ability of other users to at least open and manipulate the file? Even if it's not exactly the same in the converted file, what is the most convenient way to allow another artist to view & manipulate Ai or EPS exported from Corel Draw? (Specifically X6 if that applies)
View 2 Replies
View Related
Jun 19, 2012
I have artistic text on a simple schematic diagram that I am trying to export out as a .cgm file, but the lines convert from solid lines to dashes and the vertical text does not stay in place after the export.
View 1 Replies
View Related
Apr 10, 2012
When I prepare artwork for 1 spot color print, there is this issue.
I use black or gray for all the vectors, and convert all bitmaps to 300dpi grayscale.When I export as PDF, I select "Output color as: Grayscale"
However, my printer feedback saying that the PDF files contains CMYK color (C & Y).I've checked the color separation in Print Preview, only K, no CMY.
The printer said they always have this problem with users using CorelDraw to export grayscale PDF.They have to import it into AI and export again to PDF to make it right.Here are the files:[URL]
View 5 Replies
View Related
Mar 9, 2011
Have new pc want to move macros... Have exported workspace but Macros did not come...
View 1 Replies
View Related
Mar 9, 2011
am trying to implement using a watermark and want to make it easy and fast. I'd love it to be a top layer that is set on all design templates and not something I have to monkey with each time (waste of time).
View 14 Replies
View Related
Jan 9, 2012
Since I installed Windows 7 I have problems. Files that contain images to CMYK when exported to PDF images corrupted by distorting colors.
View 7 Replies
View Related
Jan 13, 2011
I am trying to upload a file for a microstock site that requires an eps file under 8MB. As a cdr file, it is under 25KB but when I export the file as an eps it rockets to over 400,000KB.
View 14 Replies
View Related
Mar 17, 2011
We have X5 installed on four computers at work and on two of the machines (including mine) X5 will crash everytime (100%) when trying to export to jpg. It does not even get as far as a dialog box its just crashes straight away. I it does this everytime on two comuters without fail.
Is there a way of viewing an error report? Or what would I have to do to file one?
I can export to other formats just fine, it only seems to be JPG....
I am running windows 7 and X5 SP2
View 2 Replies
View Related
Dec 13, 2011
When I export a png file in X4, I had the option to export at 1200 dpi.
How can I do this in X5?? settings? etc
View 3 Replies
View Related
Aug 13, 2010
I managed to get a nice set of different settings to publish a corel file to pdf. Now I would like copy these settings to multiple other pc's in the office. where a can find the file/folder in which these settings are being saved?
Otherwise I would have to set all different pc's individually and I rather spend my time otherwise.
View 6 Replies
View Related
Apr 4, 2011
On Corel X3 I used to export jpg proofs for email purposes. I could send RGB or CMYK version but CMYK did not appear properly on some computers (especially Macs) so I did everything as RGB.
Now in X5 I can see that standard 100% black exported as RGB gives just grey colour.
I understand that this may be appropriate conversion to indicate that this is not rich black (exporting as cmyk is fine) but I don't think it's a good solution because most of people refer to visual appearance on the screen.
Can I change anything to get the result more like on screen (like with X3)?
I don't know how do I send it now, If I send as RGB the colour is wrong (I would need to convert everything in cmyk to 100%) if I export as cmyk Mac users will see it wrong.
Graphic Designer, Web designer and playing with Video and Audio mixing and editing as well ;-).Working for Large Format Printing company Carrick Signs.
View 10 Replies
View Related
Sep 19, 2012
Using CorelDraw X6.1
Having issues with exporting files to an .eps format - using "selected only" some of the objects that I have selected do not get exported - ie. they are missing from the .eps file altogether.
On top of that, most of my colours get washed out to a grey scale - I do work in spot colours.
I have tried f8, and tried reinstalling.
View 4 Replies
View Related
Jun 11, 2013
Ssince my last update in X6 all my whites are exporting as yellow and appear yellow in the thumbnails!
I can't even roll back to X3 as that has stopped giving me export options in the pop up dialog box!!!
View 4 Replies
View Related
Oct 10, 2011
I am fairly inexperienced using Corel. I work with Corel in a technical capacity for my job. We use it to transform DXF (AutoCAD) files into image files that can then be imported into another very specialized program for weaving.
The problem I am having is this. I would like to be able to export image files from corel that have a specified height, in pixels, larger than 10,000. In the woven program, the pixels of the incoming drawing have a real, physical representation. Namely, the number of pixels wide and high in the drawing translates directly into the number of yarns wide and high in a woven cloth repeat (weft (pick count) and warp (end count) for those who are familiar). We have some designs that require the length be longer than the 10,000 limit, and until recently we have been working around this by resizing ("scaling") the image without keeping the aspect ratio in the woven image editing program. This does ok, but when the lines and curves in the drawing get "stretched," they become very uneven and this is frustrating.
We cannot use jpg file formats because when the lines and curves of a dxf file are converted to an image and then exported from corel as a jpg, the lines do not remain smooth and complete. In other words, they become a series of standalone dots. This severely complicates working with the image in other steps. Currently, our standard is to use .tif files, and .bmp files also seem to work. However, neither seems to allow the exportation of images in excess of 10,000 pixels long.
Is there a different way we could be creating these images in order to get the type of accuracy we are looking for? DXF files have to be successfully made into image files that maintain the proportions set out in AutoCAD and which also are longer than 10,000 pixels.
View 2 Replies
View Related
Jul 27, 2011
I've got Service Pack 3 which is the latest and greatest and am still finding that I cannot export to any bitmap format even in PhotoPaint. I can save as a .cpt file in PhotoPaint. Sometimes I send out .jpeg proofs and doesn't matter whether it is X5 Draw or PhotoPaint, it crashes.
I do not have this problem when I export the same thing from X4 Draw or PhotoPaint.
I am running XP on a virtualized Windows environment via Parallels desktop for Mac. I have plenty of RAM and hard drive space so it may be because I am not running Windows 7?
View 4 Replies
View Related
Mar 28, 2012
I was hoping this feature would be added in X6, and in retrospect I should have asked about this before they released X6 :S
When exporting to PDF in Corel it would be great if there could be an option to get rid of the layers. The problems with layers in PDF it uses a lot more resources and when I combine 20+ PDFs together it barely opens on slower computers. Also, my clients can see what my layer names are in the PDF and I would prefer if they couldn't.
View 2 Replies
View Related
Apr 20, 2011
every time I export my cdr file to a jpg, all but a small portion of the picture disappear. I've tried saving it in other formats and a few other things, but none have been successful. I've included print screens of what the picture should look like, what it does look like, and the export setting I've been using.
View 5 Replies
View Related
Aug 29, 2011
When I draw an image on coreldraw 11, and save it as, or export it to a .plt file, it adds lord knows how many nodes, which creates issues for my plotter. How can I fix this issue? when drawing the images I use as little nodes as possible, but as soon as I export it or import it into artcut it has hundreds more nodes than I put in.
View 7 Replies
View Related
