AutoDesk Smoke :: Edit Text Indirectly In Timeline Without Going To EDITOR?
Nov 30, 2012Is it possible to edit text in directly in the timeline, without going to EDITOR?
View 9 Replies
ADVERTISEMENT
AutoDesk Smoke :: Timeline Editor Scroll Bars?
Jun 13, 2012The horizontal scroll bar has +/- to zoom in, but I'm missing a similar +/- for the vertical bar. That might be really handy. Maybe there's short keys, but doesn't seem obvious why it's not there. Horizontal zooming we need more frequently.
View 9 Replies View RelatedAutoDesk Smoke :: Resizing Timeline After Started Edit
Aug 22, 2012I've got HD sources in a SD timeline with some comps done on the desktop. all fine . I want to resize the timeline to somewhere between SD and HD but.
Trial1. create new Timeline at new resolution, copy all edits from SD TL and insert in new TL.. this doesn't work because there's a bug and all the edits reset themselves to 0 frames of head i.e. slips all the edits.
Trial2.. save edit in the library and reformat it to the new resolution, i don't know what goes wrong here but it doesn't work.
AutoDesk Smoke :: Timeline Edit - Move Clip Straight Up Using Constraints
Dec 14, 2012i have a clip in layer 1 and i want to move it to layer 2 , i don't want accidentally move in horizontal direction (change edit point), i want to move straight vertically. Using FCP hotkey, i can activate snap (shift key) to constraint it to a cut, but that only works if i got another clip, if there's no other clip , i can't do constraint since there's no reference. In FCP i can still doing it because it can use the current clip's previous position as reference edit. But in Smoke , i can't do that. I think there should be a feature added for this process. The workaround is : do not move the clip but using duplicate, then delete the original one... but seems too complex for that little tiny task.
View 5 Replies View RelatedAutoDesk Smoke :: Timeline Edit - Drag Copy Single Frame Is Broken
Dec 26, 2012I'm using fcp hotkey , by default the 'drag copy (single frame)' is mapped to ' alt-c' . Normally this will work fine. But in some case where a cfx clip is selected or my time indicator is parked on top of a cfx clip in active timeline , then do 'alt-c' will give an error message "connectfx cannot be modified inside the containers. Proceed with edit ? "
So to solve this temporarily, i have to first deselect the cfx clip or move the current positioner on top of a non-cfx clip.
AutoDesk Smoke :: Add Text FX To A Gap Effect In The Timeline
Feb 8, 2013When I add a text fx to a gap effect in the timeline. During typing I can see the axis. but after typing I cannon drag it on screen. I have to enter the editor to move it around. Am I missing something?
It isn't done until it is finished.
AutoDesk Smoke :: 3D Text Move In Action / Want To Layer It On Top Of Timeline
Jan 23, 2013I'm doing a simple 3D text move in Action and I want to layer it on top of my timeline. After rendering the layers in the timeline, it seems that my matte is messed-up (see attached).
View 2 Replies View RelatedAutoDesk Smoke :: Underline Placement In Text Editor?
Jun 28, 2012how I can seperate the underline line in the text editor from the text? I can make the line thicker but place the line. I thought that there maybe an expression that controls the placement of the line.
View 2 Replies View RelatedAutoDesk Smoke :: Text Editor / Color Selector
Jun 13, 2012a) is it possible to change the default font that gets activated for a project or sequence? Every time we add a title it defaults to "Discreet" - it would be good if it learns from past changes at least for the sequence.
b) it would be good if the default font color changes to a color that contrasts with the background when starting to type. E.g. we had a rather white scene, started typing and no text ever showed up. I then had to go back to the full text editor, change the color etc.
c) moving the color sliders in the color selector manually without a Wacom seems to slow by default. It takes forever to move to a brighter color. And using the picker is cumbersome (we do that as a work-around instead of moving the slider). The OK button for the color sliders is not very visible, sometimes leading to us clicking away without saving the newly selected color by accident.
AutoDesk Smoke :: Where Is Load Logo Function In Text Editor
Dec 16, 2012where is the "load logo"function in text editor, i don't see it.
View 2 Replies View RelatedAutoDesk Smoke :: Access Timeline Within CFX
Nov 3, 2012Is there a way to access the timeline within CFX ( much like in Flame ) ? I see the timing button but this doesn't seem to have the same control as a timeline for a specific clip.
Also, is there a way other then "explode one" or "explode all" to go within a CFX within a CFX ( pre comp ) ? i.e. a setup that is then put within the BG of action.
AutoDesk Smoke :: Get Rid Of Play Tab On Timeline?
Nov 15, 2012Is there a way to get rid of the play tab on the timeline?
View 1 Replies View RelatedAutoDesk Smoke :: How To Export In And Out From The Timeline
Jan 29, 2013Is there a way to export the in & out from the Timeline?
It isn't done until it is finished.
AutoDesk Smoke :: Trimming With Stationary Timeline?
Feb 2, 2013Is it possible to grab the head or tail of the video segment and have the timeline stay stationay and you drag the edge to the timeline position?
View 6 Replies View RelatedAutoDesk Smoke :: View The Timeline Output?
Jul 25, 2012While in CFX, Action, Text edit, Axis etc, is there a way to see the output of the timeline? I know while in CFX you can set the CFX output as a context but what if I have multiple CFX composites stacked up and I want to see the final output of the timeline while editing or modifying something inside a CFX or Action node?
View 9 Replies View RelatedAutoDesk Smoke :: Zoom The Timeline While Playing?
Jun 29, 2012New to Smoke (DS 14 years, FCP 4 years) and hoping to learn it so I can purchase when 2013 is released. Is there a way to zoom the timeline while playing? I searched around but I can't seem to find if it can be done or if I just don't know how.
View 9 Replies View RelatedAutoDesk Smoke :: How To Export Timeline With Handles
Sep 10, 2012I have an edit and now I want to export as DPX sequence. A couple of questions:
First, is there an easy way to take a single edit and export it with handles? I realize that I can make a subclip but is there an easier/better way to do this?
I can't find an automated way to set handles on export. I have about 175 shots that I need to export .
AutoDesk Smoke :: Copying Gap Effects On The Timeline?
Aug 24, 2011It is possible to duplicate/copy a clip/gap effect on the timeline? Or do you *have to* drag/copy it to a Source Area first? In this particular case, I've got 3 gap effects that I'm essentially using as adjustment layers...for some reason I thought I could hold down F & drag them somewhere else in the timeline which would create a duplicate and drag them to wherever I dropped them. But maybe not...? In the meantime, I just copied them to a Source Area, and then dropped them back on the timeline where I needed them, which worked just fine.
View 9 Replies View RelatedAutoDesk Smoke :: Exporting Proxy Res Timeline
May 30, 2013We are working on a 4K HD timeline using Proxies at 1920x1080. Can we export an HD Prores using all the Proxy renders? Everything I do from export, Hard commit, burn letterbox all wants to start rendering the full res footage. Is there a workaround a trick to bake out a proxy res version?
View 2 Replies View RelatedAutoDesk Smoke :: How To Extract Section Of Timeline
Oct 25, 2012How do you extract a section of a timeline but keep sync further down the timeline?
I wanted to take a section out near the start, it just had V and A1, A2. There was A3-6 further down the timeline but they hadn't started yet.
For some reason I can't get Smoke to cut a track that hasn't got any media before that point. So, at the section I needed to remove I couldn't place a cut and so when I removed a section A3-6 stayed where they were.
I also tried marking in to out and extract but again it left the other audio tracks.
Such a simple thing, but I can't work out how to do it
AutoDesk Smoke :: Move Keyframe In Timeline?
Feb 20, 2013Is it possible to move keyframes in the timelime or do I have to go into the animation curves menu to do it?
View 2 Replies View RelatedAutoDesk Smoke :: FCP Shortcut - Extend To Timeline?
Jun 18, 2012There is a shortcut key that I have been using in FCP for years. That is to select the edge of a clip and hit "E" and the clip will extend to where ever the timeline is.
Is there a function like this in smoke 2013?
AutoDesk Smoke :: Importing TIF Image To Timeline?
Jan 29, 2013Graphics import into the library with a default length of 1 frame. Is there a way to lengthen that so I don't have to zoom way in to grab the edge of the clip?
View 1 Replies View RelatedAutoDesk Smoke :: Timeline Contextual Menu
Oct 8, 2012With PR4 the right click contextual menu for the timeline seems to have been re-arranged to accomodate new features.
As a result, when you right-click a timeline element to remove all effects you have to move your pointer up through a list of about 15 items to reach the "Remove Effect" command.
There also appears not to be an assignable keyboard shortcut to remove all effects from a selected timeline element. (apart from Option+Clicking on the effect in the effect bar which just removes a single item).
Would it not make sense to have this remove effect command at the bottom so that it appears right near your pointer when you activate the menu?A keyboard shortcut binding would be ideal as I realise the contextual menus are probably in a state of constant change at the moment.
AutoDesk Smoke :: Color Source To Timeline?
Feb 13, 2013In 2012 it was very easy to select a gap segment and click color source in the soft effects. In 2013 it appears to be much more difficult, you need to create it in a folder then edit it into a sequence. Am I missing something? I wish there was a color source option in the effects ribbon.
View 2 Replies View RelatedAutoDesk Smoke :: How To Select Clips On Timeline
Oct 30, 2012I have got some questions:
1. How can I select many clips on the timeline? (I work with a Wacom tablet.) When I press the pen onto the tablet and move it, I can only pull the gap. In connect fx it works, when I hold cmd.
2. If I set markers in the timeline, is there a way to also see them in connect fx?
3.There is a function in Final Cut: When I I select a clip from the timeline and press "f" , I can go on working on its source clip in the viewer. Is there something similar in smoke? I cannot find the name for this function, so I cannot search for it in the keyboard shortcuts.
4. If I render something, is there a way that Smoke automatically copies the file (without copying the effects)? The reason for that question is: I applied timewarp to a clip, then I wanted to go on working on the clip in connect fx, but the length of the clip changed - it was shorter. When I went on working in action and put some lense flares and rendered it, everything was bended and looked weird. It looked great but I did not intend to do something like this.
The next questions are no real questions but rather problems.
5. When I work with audio (audio clip locked), I cannot really cut on the music, because 5a. sometimes the amplitudes do not match the music. An example: There is no amplitude, but the music goes on for 2 seconds. 5b. And when it is correct and I cut on the beat and render it, it is not sync anymore some moments later or when I restart smoke. (It only displaces 1 or 2 seconds from the sync.)
6. Since I have updated from pre-release 4 to pre-release 5, I cannot export anymore. I have read a lot on blogs, but I could not really find my problem. I cannot even press the export button.
AutoDesk Smoke :: Red Footage Resizing On The Timeline?
Jul 11, 2013I'm looking for the workflow for Red Footage.
In our facility, we are shooting 4k HD format. Then we can finish our final project as HD.
I installed Red Rocket and the Red Footage as Half premium debayer (1920x1080) playback in realtime at preview window of the "Media" tab.
However, I insert the same clip on the timeline (1920x1080, same as Half premium debayer), smoke automatically puts resizing effect. When I open the effect, I notice this effect doesn't do anything.
AutoDesk Smoke :: Delete A Keyframe From Timeline
Feb 27, 2013Is it possible to delete a keyframe from the Sequence timeline using a hotkey, similar to ALT-[ in the editor?
View 1 Replies View RelatedAutoDesk Smoke :: Ripple All The Layers Of A Timeline?
Aug 2, 2012How do you ripple all the layers of a timeline? I can't find hide nor hair of it in the manual.
View 1 Replies View RelatedAutoDesk Smoke :: What Does Exactly Mean Red Line Under A Clip In Timeline
Sep 19, 2012what does exactly mean the red line under a clip in the timeline ?
I noticed the clip with red timeline has red effect, but it doesn't seems to mean i have to render them.
AutoDesk Smoke :: Re-interpret Footage In Timeline
Oct 14, 2012What would be a bonus is at anytime I could go to the timeline and click on an imported piece of footage and tell smoke to Include YUV headroom after the fact of it being imported and used.
View 7 Replies View Related
