AutoCad :: MLEADER With Background Color And Text Box
Oct 13, 2011
The MLEADER would provide the ultimate solution if you could alter the Background color like MTEXT by clicking the ... in the properties window.
You can now change this color through the Ribbon, placing this in the ribbon Autodesk. I can't seem to change the fit ratio of the background mask itself.
We have a MLEADER with a text box and a background mask that work together however the masking gap or size is not controllable to my knowledge.
View 1 Replies
ADVERTISEMENT
Oct 29, 2012
i did the test with a qleader and everything seem to be functional but mealder have an issue where autodesk have to check this
example: i have a layer called test1 with color green i have a meleader with a Dot as an arrowhead when i go to the viewport and change the vport color to red
well everything changes expt the arrowhead which will take the layer color (green) but if i go to properties and i change the arrow head to closedfilled then it will take the vport color (wierd) i did the test with autocad 2008 to 2012 all the same problem
i did tried with a qleader and it works fine.
View 1 Replies
View Related
May 4, 2010
I am trying to use a lisp that will turn on a background mask on selected mleaders. I found the attached lisp here [URL]. it works good except the mask border offset factor is set to 1.5. I need the offset to be 1.0. When I look thru the lisp code it says the default is 1.0 but can be changed.
how I can use the lisp and get mask offset factor to be 1.0?
C3D 2010
3G RAM
XP PRO, SP2
View 1 Replies
View Related
Apr 5, 2012
So I recently upgraded from AutoCAD 2008 LT to 2013 (a huge jump), and I'm now tying to use MLEADER command.
When I create a new leader, the text I create for it does not display on screen or even in the command line while I am typing, which means I have an absurd number of typos, I'll get distracted mid-sentence and forget where I was, etc.
This is bad. I'm assuming there's some sort of system variable that turns this on and off?
Possible relevant info: leader scale is set to "annotative," leader style is "MTEXT."
View 1 Replies
View Related
Jun 21, 2010
Using ACAD LT 2009. Update 3.
I've tried some of the settings for the mleader text placement. I'm trying to get the text to sit on top of a horizontal line. And an angled leader from the horizontal line to the object I am describing, ending in a dot.
All this is working fine, the lines, dot, etc. It's set for straight, not spline. And max. 2 leader points. All works as I want here.
What isn't working well is the text placement. I am able to have the text be horizontal, this works. But I can't get it to have the text above the horizontal line. I can set the leader connection to underline top line, or underline bottom line, or underline all text. These 3 choices seem sort of retarded. The first two put the text right on the line with no space. Doesn't look good. The third choice puts the text a bit above the line, looks perfect, except that there is now an additional line below the horizontal leader line, and that looks dumb.
Am I missing something? Has this feature matured more in later versions?
View 4 Replies
View Related
Oct 1, 2012
In Autocad 2011, Mleader, is there a way to set the block size and the text size with the source block (square, cercle etc.. I would like to make it a specific size instead of measuring then scaling.
View 2 Replies
View Related
Nov 28, 2011
AutoCad 2012 SP1 / Windows 7 64 bit
Sometimes I have MLeader text without Mleaders (ie, I remove the leader arm using MLEADEREDIT). Then when I go to edit this 'floating note', the base point moves:
In this screenshot, I've just finished editing the text. Note that I added in the diagonal line at the current insertion point of the Mleader text (top right):
Then, after I click outside the Mleader box, the text moves:
THis happens only with right-aligned MLeaders, and keeps happening, ie if I edit this text again and close it again, it will move again.
View 4 Replies
View Related
Jan 30, 2013
Would like to put a gray (or other color) background on some text. Drawing contains some reference numbers to others drawings that may change and would like to be able to spot them more readily by scanning for color. Do not want to mask, just a different color. Thought this would be in mtext drop down but don't see it.
View 5 Replies
View Related
Oct 28, 2013
I would like to set dimension text fill color to "background" instead of, you know, dimensioning my drawings properly.
I have this code I got on these forums and it works well except for the 'TextFillColor' variable. I can't find the correct color number or syntax for "Background'. It's currently set to 0 which produces ByBlock, and any number I put in there corresponds to the AutoCAD color number (1 = Red, 2 = Yellow, etc.)
If you have a better routine that you could post that works for me too. Or maybe you could just do my work for me? Even better.
(defun c:test (/ obj num cnt)
(vl-load-com)
(setq ss1 (ssget '((0 . "Dimension")))
num (sslength ss1)
cnt 0)
[Code]...
View 5 Replies
View Related
Feb 12, 2010
When you use the Text Tool a text is added inside a frame. The frame is not visible when printing, it is only for internal use I guess. Can I add a color to it so that the text gets a background? I don't mean to color the actual text, I just need to add color to the background of it.
If it is not possible, what would be the best way to achive what I want: a text inside a shape of a certain color?
View 6 Replies
View Related
Jun 6, 2009
In FH I could have an auto expanding text box whose attributes included say: black text on a white ground which would expand as one types, for the life of me I can not seem to achieve this seemingly simple procedure in Illustrator.
View 12 Replies
View Related
Jul 18, 2012
I'm trying to write a lisp routine to create a two line MLEADER but i can only get one line of text. Creating the MLEADER manually from the command line i just have to hit enter after the first line of text to add a second line. How would i do this in a lisp routine?
View 2 Replies
View Related
Feb 27, 2012
I need to insert text over some mottled regions so I want to insert black text with a white background. I can't find a way to give the text a background color. I can do this with Powerpoint and Visio, so why not with Photoshop?
So far I was able to copy a white region in the background layer and drag it to the place where I need it on the text layer, but that seems klutzy to me.
View 8 Replies
View Related
Mar 13, 2013
I have a large (22"x28") poster completely filled with 8 pt text. I have a simple image under the text. I want to change the parts of the text over the image to the image color. Basically, I want to make the image out of the tiny text and delete the image from the background. As of right now, I'm individually selecting text and changing the color, bit by bit. I know there has to be a much better way, this is going to take hours! I've been using AI for a very long time and this is one of the only times I've been completely stumped! I've included a sample image, the actual one is much more involved.
View 10 Replies
View Related
Jun 15, 2013
I am new to GIMP. I have a pdf with a neat picture and want to eliminate some text, essentially painting over it in the same color of the rest of the red background. Then I want to turn it into a powerpoint template with the first page the full picture but my own text and subsequent pages just a sliver of the picture at the side, with the normal ppt format and capabilities. I have attached the image.
View 1 Replies
View Related
Mar 9, 2012
I have a scanned image which is black text on white paper. The paper comes out darker in some section because of scan. Is there a simple way I can make the off-white background white?
View 1 Replies
View Related
Nov 12, 2013
when I switch tab once at the end of the line sits the line break outside of the paragraph text frame..The background color so then runs out of the frame.A wish at left line intent (or right) it should be possible to fill these also with the background color and a function that assigns every second line is a background color..
View 2 Replies
View Related
Jun 5, 2013
I did put a real photo in the background of my website to fit entire page. So the text of my webpage is black, and sometimes other colors. So what happen is that some times the text is hard to read when it come on top of dark places of the photo (for example hear of people). So i want to adapt the photo to make it more unicolor, more whiten (increase whiteness) so the black text will appear even better.
What tools and filters in gimp that give me this ability to do that ?
View 2 Replies
View Related
Oct 17, 2013
I want to create a transparent text on a solid color background, and I need text transparency to go all the way to through the image (i.e. do not show the solid color background). I have the transparent background layer, the solid rectangle layer that occupies part of the image, and the text layer (with text element) on the top of the solid rectangle layer. How do I make text transparency to go all the way through? Here is a similar example for Photoshop CS, only in my case, the background layer is transparent (i.e. there is no picture): URL... Basically, I need to make the letters see through, so they show the background color on which the image will be placed. Is it possible to do in Photoshop Elements? I'm using version 9 on Windows 7.
View 11 Replies
View Related
Mar 4, 2013
When I copy some text in Illustrator, say red text, and my color well is set to pink, the newly pasted text is now pink?
Here is a short video of the problem, me copying the top text and without changing anything, pasting it. Note the color-well is set to black
[URL]
View 12 Replies
View Related
Sep 13, 2011
I'm trying to get the MLeader example from the online Developer Guide to work but it keeps throwing an error.
[URL] ....
Any working example of MLeaders that are associated with their annotation?
View 1 Replies
View Related
Oct 24, 2012
I like using the edit label text in the lable styles to add additional text and information.
I can turn on / off the backroung mask for all the style but not each.
Is there a way to turn on / off the backround mask of each layout text.
I'm using civil 3d 2012 and testing 2013.
View 1 Replies
View Related
Jun 12, 2013
I have an mleader with a single vertices point.
There's a thing called a doglength which enables a grip point that allows the leader to be repositioned.
Dim ml As MLeader = TryCast(Entity, MLeader)
ml.SetDatabaseDefaults()
m_leaderIndex = ml.AddLeader()
m_leaderLineIndex = 0
ml.SetDoglegLength(m_leaderLineIndex, 2.5)
I have a problem with the dogleg length in that I can't rotate it according to the current UCS. Is this possible?
View 2 Replies
View Related
Sep 27, 2011
I need reading the values from an Mleader object that contains a block. I can get attributes from normal blocks with no problem, but I am struggling with this.
I can get all the way up to casting the attributes, but when I try getting the Attribute Reference, the code crashes. How do I get the AttributeReference from the AttributeDefinition? As it is now, if I declare the AttributeDefinition, the values return as nothing.
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument Dim acCurDb As Database = acDoc.Database Dim acEd As Editor = DocumentManager.MdiActiveDocument.Editor '' Start a transaction Using acTrans As Transaction = acCurDb.TransactionManager.StartTransaction() Try Dim acBt As BlockTable =
[code].........
View 2 Replies
View Related
Nov 19, 2013
I have a method DrawMLeaderLine(Database db, Transaction tr, Point3d point, string text) that draws me a MLeader line to the given point with the given text as annotation. The MLeader line points to the midpoint of a Line entity. What I need is a binding between the Line midpoint and the MLeader line, so when I move or resize the Line, the MLeader line should follow! I already tried to solve that, using constraints, but it doesn't work for Leaders.
This is my code...
public static MLeader DrawMLeaderLine(Database db, Transaction tr, Point3d point, string text) { Point3d mTextLocation = point + new Vector3d(5, 5, 0); BlockTableRecord btr = tr.GetObject(db.CurrentSpaceId, OpenMode.ForWrite) as BlockTableRecord; MText mText = new MText(); mText.SetDatabaseDefaults(); mText.SetContentsRtf(text); [code]........
will be called from a different class...
Line line = DrawingUtil.DrawLine(doc.Database, tr, closestPoints.Item1, closestPoints.Item2); //Get midpoint of line double midPointX = (line.EndPoint.X + line.StartPoint.X) / 2.0d; double midPointY = (line.EndPoint.Y + line.StartPoint.Y) / 2.0d; Point3d midPointOfLine = new Point3d(midPointX, midPointY, 0); //Draw the leaderline MLeader leaderLine = DrawingUtil.DrawMLeaderLine(doc.Database, tr, midPointOfLine, "Connection");
View 2 Replies
View Related
Sep 9, 2013
How to set the total scale of a mleader in C#?
In German it's called: Gesamtskalierung
I had no Problem with this....
_mLeader.LandingGap = 6;
_mLeader.TextHeight = 60;
_mLeader.MLeaderStyle = _mleaderStyleId;
but the total scale is also very important for me. I try to add a picture with a red frame so you can see what I' missing.
View 9 Replies
View Related
Sep 22, 2013
Remove the text and the white background and fill it with its respective background ?
View 4 Replies
View Related
Jun 23, 2013
what the difference is between the landing and a dogleg of a mleader? What is the difference between the properties:
EnableDogleg
DoglegLength
EnableLanding
LandingGap
View 4 Replies
View Related
Aug 16, 2012
I need to replace some text in a bunch of mleaders but the find/replace doesn't seem to work.
c3d2012.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
View 4 Replies
View Related
Mar 29, 2012
I pulled in a survey from an outside vendor and was just going to work with what they have. Their MLEADERS are a different font than what I would like and changing the Text Style doesn't work. I notice in the properties for the MLEADERS that the contents don't have just the mleader text, but is says this instead:
{fSansSerif|b0|i0|c2|p2;W1;TEXTHERE}
Obviously its overriding with the text style with the bit of code. But is there a way to change it? Hitting the ellipses in the Contents properties just transfers control to the model space. I can't edit from the properties panel like you can with a DIM or anything. I don't remember how it functioned in '08 or '12. MATCHPROP also does not change the font.
Yes I could just create the MLEADERS but I feel it would take less time delete that fSansSerif junk than it would be to place and retype every single MLEADER in the drawing.
View 2 Replies
View Related
Aug 16, 2012
I put mleader into a LISP routine and it is doing the text attached to it only in the command line instead of in the drawing is ther a way to put mleader into a LISP routine and have it do the same as when you just type in mleader?
View 2 Replies
View Related
