I have a white backgrounded image that is written some lines on it. I wanna extract that lines in autocad as a block then maybe i can explode them properly. how to import that lines into autocad?
View 4 RepliesI would consider myself intermediate photoshop, but to the photoshop community most likely a nub. anyways, I have been trying with different ways to extract this breaker from an image, with all attempts looking edgy and not professional.
View 4 Replies View Relatedhow to crop a section of an image and paste it into another picture. Im pretty lamen when it comes to PS so the easier the better. What i am trying to acheive and learn, is to outline the shape of an item in a picture and copy that shape to the clipboard, to paste onto another picture. EG in the pic below id like to separate the BARN and GRAIN SILO form the background, so that i can paste it into another pic.
View 1 Replies View RelatedI am working with vector art that has lines that either look like they were cut off and not finished out or extend to the edge of the page so they are straight when they should actually be curved.
Is there any way to take a straight line or part of an image and curve it with ease or will I have to redraw or alter each line?
Ive setup some blocks which have attributes and have been successfully using a template to extract the data for a while. I just created a new block and tried extracting the data. All works fine except for BL:NAME returns '*U' instead of the block name. The block is called 'SM'. Is '*U' a code for something?
The old blocks still export fine.
what should i Select in data Extr wizard to get the readings of series dimension on one layer preferably
View 0 Replies View RelatedHow can I extract coordinate system of a autocad Map dwg file by using C#. I have to use this information to set the coordinate system of other drawing.
View 1 Replies View RelatedI've recently upgraded to 2013 but when I follow exactly the same Attribute Extraction process as used in 2012LT, the output throws out some duplicates and does not even process other data. I've been through the drawing thoroughly turning layers on/off and deleting text to try and suss out the problem but it just seems like a fault with the command.
Incidentally, I've extracted data from the same drawing in 2012 and 2013, and it all works fine in 2012.
I am working on a co-ordinate utility that utilises data extractions. I am able to extract the data that I want to an XML file, but how do I create a dxe file and link it to a table? I have found the WizardSettings has a table style, but that is as far as I have reached.My code is below.
using Autodesk.AutoCAD.ApplicationServices;using Autodesk.AutoCAD.DatabaseServices;using Autodesk.AutoCAD.DataExtraction;using System.Collections.Generic;using System.Data;using System.IO;using AcApp = Autodesk.AutoCAD.ApplicationServices.Application;namespace acmCoordinates { public class DataExtraction { const string outputXmlFile = @"c:empdata-extract.xml"; public static void.
[code]....
I have a favor to ask. In my drawings i have two distinct layer names (Say "ew" and "ns"). On these layers i have numerous plain text numbers in 5mm increments which are repeated many times throughout the drawing. What i would like to do is be able to start a VBA macro, have it ask the user to select an area by window on the drawing file, and have VBA look up and count the sum of all instances of each number occurring in the selected window. Then dump them into an excel spread sheet which i will then manipulate from there. An example output would look something like below: "NS" Layer Quantities... Height 25 30 35 40 45 and so on Total 56 33 62 39 50 "EW" Layer Quantities... Height 25 30 35 40 45 and so on Total 56 33 62 39 50 The ouput would require two rows of information. The top number would be the number on the drawing as text item and the lower row would be the total number of times that number appears in the selected area.
View 4 Replies View RelatedIf I use the data extraction tool in Express tools or go down the path of ATTEXT I can get an extraction result that includes block handle data. If I use the data extraction wizard I can't recover this handle data.
Is there a reason for this and can the data extraction (.DXE) template file be tweaked to accomplish this?
Here at the office we use a template I created using Data Extraction. After creating the table and inserting it, it works just fine. Then, if you make changes to the door or window you can click the "Download Changes From Source File" and it will update the table ... However, after saving it and trying to work on it the next day, it somehow unlinks the table I have in my drawing and I cannot "Download Changes From Source File" to update the table ... I checked under XREF and it shows it is loaded and I have it reading from the same path I saved it. I would like to know if there is a way to re-link the table to the .dxe file or how to prevent from it un-linking new tables?
View 0 Replies View Relatedi want to extract specific data from the .dwg file.i used data extraction and selected the objects to be extracted and it worked well.But when i used the same .dxe file as a template to extract data from the whole folder,then a lot of other unwanted data is also getting extracted.i have attached a sample file .what i want is a code through which i can select the data(for example the dwg name,no,date) and it gets extracted to a particular cell in excel.i had tried the txt2xls.lsp file.but am getting errors.
View 2 Replies View RelatedI am creating a schedule with a .dxe file, which extracts data from attributes into a schedule. Is there a way to link this file so it is a "relative path" instead of a full path. IE: The .dxe file is liked to the same folder that contains the current drawing, not linked to my C:/AutoCad drawings/Job Name/folder2... I really want to be able to move the drawing and .dxe to a different folder and not have the link broken.
View 4 Replies View RelatedI am not very familiar with block attributes or data extraction. I have lots of questions.
i have 20 blocks each inserted multiple times. I would like to provide drop down menus to track each individual part and label size, location, etc. Can i insert attributes to one block and copy the attributes to other blocks?
Can i pull in info from an excel document, or do i have to enter the info line by line in the lookup table? (i have 400 names to assign in one of the dropdown menus)
Step by step process to pull the info from the attributes in these blocks into an Access document?
I have a drawing set to UTM83 Zone 14 Meters and my drawing units is set to meters also. I created my surface from my point cloud. When i do the contour extract feature (surface object extract), the contours elevation is in the wrong datum or elevation? The surface contour is 620 but the same extracted contour says 188.97? Curious why this happens. It seems to me that it is back calculate elevation or datum to a different coodinate system.
View 7 Replies View RelatedI want to extract 3 different variable strings based on one large string such as:
"2013_ARCH-Lev01.dwg" <or "2014_STRC-Lev00-BM">
and the 3 variables are:
Dim YEAR As String
Dim TRADE As String
Dim LEVEL As String
YEAR = 2013 <or 2014>
TRADE = ARCH <or STRC>
LEVEL = 01 <or 00-BM>
I was thinking of using the first four digits "(0,1,2,3)" for YEAR?
using the next four digits following the underscore "_(0,1,2,3)" for TRADE?
using the rest of the digits following the dash "-(unknown)" for LEVEL?
Seems like i export the data of thickness, diameter, lenght and mass to excel via dataextraction, but if i change something in the drawing, its not updated in the excel file..
I also wanted to export the data to an already existing part list template, but this seems impossible...
ACAD 2006
I create named views for each area that will become its own sheet when I go to paperspace. Right or wrong that seems to make it easy to create all of the layouts.
I would like to be able to create a table thru attribute extraction that will take-off parts in an individual named view so each layout sheet will have a parts list for only the items I want shown on that sheet.
The only two options I see in attribute extraction are for model space only and entire drawing. Am I going at this wrong?
Example: I would like a table showing all of the window types on level 1, level 2, etc. on the same sheet as the key plan for that level.
I'm doing a data extraction with a block with attributes. When I extract the data, it sort like the image below. I want it to sort 1,2,3,4,5,etc...
View 4 Replies View RelatedHere is what I would like to accomplish:
1. Construct a blank "template" drawing that already has a pre-determined data extraction table set up with every piece of valueable data that may or may not be used in the drawing showing values of zero (because there is nothing drawn yet of course)
2. The data extraction table is linked to an excel file. This excel sheet will recieve data from the linked CAD data extraction table and use the data in the pre-determined 'destination' cells to execute cost economics equations
3. I would like the data extraction table to be set up with all possible entities that may potentially get drawn into the drawing - I don't know if this is possible because in any data extraction table I have ever drawn, as soon as the entity the data table is accounting for is deleted from the drawing, the whole line from the table dissappears - in my case I would love for it to just show "zero" or null
4. The reason for all of this is to not have to create a new data extraction table and excel sheet every time - The two templates would already be linked, and all the drafter would do is draw the drawing, the appropriate data would show up in the data extraction table (eg. X amount of feet of poly line, X number of Y block), be pushed to the excel sheet in predetermined locations, cells would be linked on the sheet to execute costing equations.
I hope i have been clear enough that the project represented in the drawing does not have many possible components and that is why having them all listed in a pre-designed data extraction table would not take up much space, the benifit of having everything linked before hand is the goal.
Using autocad 2002, how to extract the control points of a spline drawn and writing into a file using autolisp?
View 4 Replies View RelatedHere is the problem with the process put simply:
Start with a new drawing Drawn a rectangle. Place a block which has an attribute with a number at each corner. ie. 1-4. Convert all objects into one single block. (the attributes become nested). If you use data extraction and retrieve the attribute number, position X and position Y, and output to a table the information displayed is correct. HOWEVER, if you rotate the block and update the link the coordinates become incorrect? This seems to be an issue with nested blocks?
I am new to this company, we manufacture and build panelised buildings. We are 3 users in the drawing office, we all have Pallettes set up in ACAD and our pallettes all reference the same block files on the server.
We do Data extraction when we move into the production phase of any project and we extract all block information into Excel.
The problem is that when these blocks were made very little thought went into the naming of them. So now when ACAD produces a list of the blocks on the drawing I have electrical, plumbing, fittings etc all mixed together, making it time consuming to sort through them and put them together in their separate spreadsheets.
What I am hoping to do is go through our library of blocks and rename them all, simply giving them a single letter prefix at the start of the file name IE E - Single plug, P - Tap, D - 826 Door etc. The problem is obviously if I rename them then all 3 users have to reassign each individual block again to their palettes.
I have created a data extraction table based on attributes placed on blocks. The data table is in my layout and it includes part number, dimensions, and cost. What I need to do is total the cost of all the items at the bottom of my table. I added in a row for the total cost which is not linked to the table but when I try to add a field in that cell to sum the cells above it (the costs), I get ###. I already tried unlocking the cells, but that didn't do anything.
How can I add a field summing these costs?
Working with an excel spreadsheet and following ACA. Looking for datalink dialog box.
Ribbon: Insert tab>Linking & Extraction panel>data link.
Problem is that the Linking & Extraction panel is not available.
ACA2011
Win7 64
I wish to extract geometrical data from autocad 3d object (mostly poligons), like length, height and width. I can see them in the property of a single object, but when I want to extract them into a table or into an external file, I can't find them.
View 5 Replies View RelatedI am working on Data compliation and trying to extract data from multiple AutoCAD drawings. The data extraction wizard works well and extracts all the data from the drawing. I wish to segregate the data and want some certain set of data e.g. in P&ID drawing, I need only instrument Tags which are connected to DCS and likewise...
Is there any way to filter such kind of data and get the required results?
Can the Data Extraction Wizard be added to 2013LT?
View 2 Replies View RelatedI continue to suffer project downtime and setbacks due to a variety of defects in the software. Here formula columns are not working. I created a Formula Column for simply computing ItemQTY *Item Cost in a Data Extraction table for a current project.
QTO is defective, and now Data Extraction is not working. What does the product leadership expect us to do for quantity analysis?How can Quality Control of this software significantly improve?
I have some 17500 points that I need to get the co-ordinates of but I need to have them in the order they were drawn. I have been through the wizard for data extraction and cant find any option for displaying the data in this order.
View 0 Replies View Related