I'm working on a Ribbon and Icon design for our software and I'm having some issues getting my icons to appear the same way they do in AutoCAD. When I hover over an icon on my custom Ribbon there is a white box around the icon (see Ribbon.jpg), but when I hover over an AutoCAD icon the white box does not appear (see Ribbonii.jpg).
View 2 Replies
Is it possible to have a custom grayed out icon in the ribbon when this icon has been used at least once? For example, the user clicks on this icon and it becomes gray to notify the user it has been used. The purpose is to load certain DLL with Netload only once.
View 2 Replies View RelatedIs there a way to add symbols to the text edit ribbon under the symbol icon
View 1 Replies View RelatedI am trying to customize Autocad 2012 ribbon tab. I can't seem to find how to mimic the small arrow that appears in several of the standard menus. For example, in the 3D Solids - Home Tab, the second panel from the left is "3D Solids Home - Mesh" It has a small arrow in the corner that opens up a preferences dialogue box.
How can I add that arrow to a custom panel with that little arrow so that I can add my command to it?
I have created a seperate CUI for use as an enterprise menu. My issue is when I set my main CUI as ACAD.cuix and my new CUI as enterprise, the custom ribbons created in the enterprise file does not show in the panel.
View 5 Replies View RelatedCreating a ribbon for Partial Customization files in the CUI, and I am trying to setup some buttons for existing polylines for example underground electric and overhead electric. When writing the macro what are some ideas for creating a polyline with the proper linetype for that particular object rather than changing the layer in layer properties dialogue.
View 9 Replies View RelatedIn our 2010 version users used the "OPT Color Control" in a toolbar. When we went to 2012 we switched our users to the Ribbon. I am not able to move this Control to a ribbon panel. I can place in a toolbar and it works okay. Best I could find is "ACObjectColorCombo", Object Color Gallery drop down. Unfortunately I find that this drop down doesn't handle a selection set the way the 2010 toolbar did. I find that one cannot reliably pick a selection and use this to change objects to color bylayer. I can pick the object prior to using the OPT Color Control and they work fine. I pick the same objects and use the Combo box and sometime they are found and change other times I pick one or two and they work.
Is there a way to move this toolbar control to the ribbon, it will not let me drag and drop to a panel in the CUI.
Is there another solution to change object(s) color in a drop down from a ribbon panel? I have tried searching but am not finding other commands or control with selection drop down in the CUI. (Our choice is not to use the Properties dialog. Which, by the way, does work every time on the objects.)
I have tried everything even un-installing and re-installing. I have customized programs that have been working properly for months by many individuals. These include custom menus, toolbars and ribbon tabs. One day last week one of the ribbon tabs disappeared. The crazy thing is if I load the .cuix file as an Enterprise cui, everything is visible and works just fine. BUT, when I load it as a partial cuix file the ribbon tab does not show up. The custom menus come in, my custom toolbars work and show up just fine but the dag blasted ribbon tab won't show up.
Yes, it's marked as visible. I've done and redone the cui editor, customized my workspace again and again checking every piece of information. I need to have it loaded as a partial cui file as I am the author of these tools that hundreds of people in my company depend on.
How to add buttons and create my own ribbon in AutoCAD, but now I would like to be able to have buttons for two different schedules that I have created. While I can have a button start the schedule command it won't automatically pick the schedule that I want it to create.
View 1 Replies View RelatedI am unable to find the "Ribbon Combo Box - Workspace" to our 2013 MEP or ACA CUI. It is visible in vanilla AutoCAD 2013, but it isn't listed in the Command List (under Ribbon Control Elements). I am unable to transfer it from AutoCAD's cuix either. We typically have this control in our Quick Access Toolbar, but I am unable to create this same environment in the 2013 verticals.
I am unable to see it even using one of the default profiles, like "AutoCAD Architecture (US Imperial)".
I want to put the list of open drawings (like the window tab on the menubar has) onto the ribbon? Is this possible?
View 2 Replies View RelatedIs it possible to turn off the UCS icon in model space as well as in each layout? I'd like to set this up in the acaddoc.lsp files so that they're turned off in all opened drawings.
View 6 Replies View Relatedhow to create a nested drop down list in a ribbon panel.
is it even possible. It must be, but I don’t know how Autodesk managed to do it in the C3D.cuix for the create ground data panel, point drop down.
second question, where is the icon for a drop down list saved.
looking at a C3D dropdown list icon there is no path to the icon, but when I create one it shows a path.
toggling ribbonclose and ribbon but that did not answer my question. I'm using AutoCAD 2014 and there is a setting to either toggle through all ribbon states or you can select one. You can cycle through:
Minimize to Tabs
Minimize to Panel Tiles
Minimize to Panel Buttons or
Cycle Through All
I want it to always minimze to tabs but when I close CAD and re-open it doesn't remember that selection and always cycles through all minimized states again.
I don't see any system variable or registry value that seems to save this. how I can make it remember?
So I can run the following code from the command line with no problem:
(WRK-Insert_Standards_Block '("S:\AUTOCAD\_Common\Linetypes\CSW_Civil-Linetype"))
(WRK-Insert_Standards_Block '("S:\AUTOCAD\_Common\Linetypes\CSW_Survey-Linetype"))
(WRK-Layer_Insert_all "CSW-X-FM_Layers_List")
However when I put it into a macro (custom command to be used from the ribbon) it spits out the following in my command line:
(WRK-Insert_Standards_Block '("S:
I am in the process of creating 2 lisp routines, one that loads Support file search paths on the network and one that adds support file search path locally. Each routine will be run depending on the ability of ACAD to find a file on the server. I noticed that when I add the new directories the default AutoCAD folders get replaced. I researched this and found that using the SETENV and ACAD I can include the default support paths.
The issue I am running into is that not all default folders are being added to AutoCAD when I used the ACAD variable. A plugin folder under Program Data is listed in the original install, but it is not listed when I add my directories and used the ACAD variable to add the default directories. The same thing happens when raster design is installed. The help folder and the install directory for raster are not carried over when using the ACAD variable.
I am attaching the coding for the lisp routine adding server paths. Is there some syntax I can add to tell it to append to the list instead of replacing the SFSP list?
(vl-load-com)
(setq files (vla-get-files
(vla-get-preferences (vlax-get-acad-object))
)
)
(setq SERVNM (getenv "servername"))
(setq SLSERV (STRCAT "\\" SERVNM))
[code].........
I am updating my CUI ribbon for some of my customized buttons. I have changed some of the bitmap images that I have saved in my network folder for the network AutoCAD customization. However, I cannot get the Ribbon to update to show the new button images.
I have opened the CUI, browsed down to the partial CUI for our corporate configuration, then to the "Ribbon", then to the "Tabs", then to the individual section of the tab and clicked on it. Then I click on the specific button in the "Panel Preview" pane to get the properties for that button to show. Then at the bottom of the "Properties" panel, I click on the "Small Image" line to see the three dots that allow you to browse to where the .bmp is stored. I have not renamed the bitmaps, but just modified their color and the way they look. So I have to change the .bmp file to a different location in the small image properties, then change it back to the correct image name. It will update the appearance in the "Panel Preview", but will not update the actual ribbon. I click on "Apply" and "OK", and it still doesn't update the actual ribbon. I have tried closing and restarting AutoCAD after that. As a last resort, I rebooted to see if that would complete the change, but in vain.
I made sure that the network location for the bitmap files is listed in my Options > Support File Search Path (very near the top of the support file list), but that still isn't solving the problem.
How to get AutoCAD to completely forget the old image that is showing on the ribbon and repopulate it with the updated bitmap image?
Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies View RelatedIs there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies View RelatedIs it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies View RelatedI have a routine that work fine, but I receive a nil at the end of command. How to fix that?
View 7 Replies View RelatedI'm trying to find acceptable point values to feed to the vlax-3d-point function for a vla-addmtext function. With vanilla lisp I just provide the point as x y = "7/32" "2-3/8". So I assumed that I could drop a 0 in for the z like: (VLAX-3D-POINT "7/32" "2-3/8" 0).
Then I thought I was going to be tricksy and try (vlax-3D-point (getpoint)) believing that I could pick the point and get what I need to feed the function, but yet again, no deal. The command line gave me:
node
of #<variant 8197 ...>
Nothing I can use in my code. So how do I find the point in a format that vlax-3d-point will like?
What is the magic word for put a point at each end of an arc, the lisp I have only put a point at center of the arc.
(defun cAA ( / i j ss e1 e2 p1 p2 p3 points )
(if (setq i -1 ss (ssget '((0 . "ARC"))))
(progn
[Code].....
Is there a quick way of getting the value of an attribute?
I have an attributed block called "tp_attributes" and it has and attribute called "OrderNum".
I just want to be able to quickly grab that value.
I use Spell Check regularly and I always check the entire drawing. I would like to add to the Spell macro so that when I pick Spell from the toolbar it goes past the Check Spelling window and begins checking the entire drawing.
I believe I need to insert Alt S into my macro to select Start from the window to begin the check. Is there a character or series of characters that will represent Alt in a macro?
I upgraded from Autocad 2004 to 2012 recently and my lisp file doesnt work anymore.
what it's supposed to do is when looking at the layout tab that you want you can switch to the model space location of the same zoom as the layout tab without messing with the layout zoom.
(defun c:msp ()
(setq cm (getvar "cmdecho"))
(setvar "cmdecho" 0)
(command"view" "d" "tmp")
(setvar "tilemode" 0)
(command"pspace")
(princ "Click TWICE on desired VPORT: ")
(command "mspace" pause "view" "s" "tmp")(princ)
(setvar "tilemode" 1)
(command "view" "r" "tmp")
(setvar"cmdecho" cm)
(princ)
)
I need a program that simulate this DOS command: dir /on/b *.dwg >list.txt
it list all dwg files on current open dwg file folder and sort them and finally put them in a text file with list.txt name. something like thistype list.txt)
test1.dwg
test2.dwg
test100.dwg
test256.dwg
test1005.dwg
(sort alphabetically and logically) because of disabled DOS utility in my PC I need a pure lisp functions, I tried to wrote this program but I couldn't!!
(defun c:listMaker()
(vl-load-com)
(setq path (getvar "dwgprefix"))
(setq fn "list.txt")
[code]...
and also I need a append a string(='This Is EOF') in the last line of the "list.txt" file.
