AutoCAD Visual LISP / AutoLISP :: Insert Block And Fill In Attributes With Var Values
Nov 4, 2011
I am using 2008 and I have a dynamic block with attributes that I want to insert with the below program and have the attritute values filled in automatically. I have done this with other programs in the past and they worked great with literally no problems. They were not dynamic blocks may be the reason this does not work. Why the block will not fill in the attributes like it should. Occasionally in my testing I see a message about "units" when I am inserting the block but I have my insunits set to 0. I have attached one of the blocks I want to use. I am thinking either you cannot do this because it is a dynamic block or there is a new variable that won't let it work.
(setq upisosym "L:/AcadUtilsJack/Programs/InsertIsoSymbols/ELL90BW_Flip_01" isosym "rat")
(setq upod "3" upsch "sched" upmatl "matl" uprat "400")
I found these two new variables and turn them off or 0 thinking they might be the problem???
(setvar "INSUNITSDEFTARGET" 1)
(setvar "INSUNITSDEFSOURCE" 1)
(defun c:JD ()
(setvar "attdia" 0)
(setvar "attreq" 1)
[Code] .....
View 9 Replies
ADVERTISEMENT
May 21, 2013
I am testing de new version of autocad 2014 and i have a problem with lisp.
when i use (command "_insert" "block1" pt1 "" "" "" obj1 ).
The block is inserted but without value. In the old version work.Some variable that has to change?
View 3 Replies
View Related
Mar 19, 2013
I have an interesting challenge. I am tasked with updating old drawings. The only difficulty that I've run into with the old files are that the TitleBlocks are all done with all of the attributes are named "SPEC". There are 90 attributes. I'm really struggling with getting each attribute's value and then storing the value to a variable so that I can then put that value into a new TitleBlock. The old TB will be deleted to avoid future confusion in the file.
(To clearify, the old TitleBlock is in model space, while there are actually nine new TitleBlocks all in seperate paper space Layouts, and this program may have to run on hundreds of files.)
getting the values from the Old TB. I need them in order of first to last or last to first (either way will work since I have the variable names in a list that can be reversed if necessary.)
simple function to read through the block's attributes in order and store the attribute's value to a variable name in the seperate list (also in order)?
View 5 Replies
View Related
Feb 12, 2012
I need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
View 3 Replies
View Related
Aug 30, 2012
I want to entmake a block with a multiline attribute. Entmaking the block definition works fine, but what do I code for the Multiline Attribute? Should it be coded (0 . "MTEXT") instead of (0 . "ATTRIB")? I know (101 . "Embedded Object") does not work. What other codes need to be included?
View 2 Replies
View Related
Mar 6, 2013
I got a new work and get it done in the next 2 days, but first I need to do this... from a text file (or excel file, I got both) I got 3 columns, 1 one for node number, and 2 other for X and Y coordinates for each node.
So from that file I need to insert into autocad the node numbers as text (using the current style and height) at the point specified by the other two columns, that are the X,Y coordinates which will be the insertion point of text..
View 5 Replies
View Related
Apr 18, 2013
I am learning autolips and i found a problem that i can´t solved.
(vl-load-com)(defun c:pmb ( / ss ent pt )(prompt "
selec block : ")(setq ss (ssget '((0 . "INSERT")))) (setq ent (ssname ss 0)), (setq pt (cdr (assoc 10 (entget ent)))) (command "point" pt))
wich this code you select one block and insert one point at insert point´s block.
which this other code yo select all block and insert all point.... but in one block
(vl-load-com) (defun c:pmb11 ( / sele cod bloque nbloque lista pt ) (prompt "
block: ") (setq sele (ssget ( List'(0 . "INSERT"))) Cod 0 )cod (1+ cod) (repeat (sslength sele) (setq bloque (ssname sele cod)) (setq pt (cdr (assoc 10 ( entget bloque)))) (command "punto" pt) );repeat )
View 4 Replies
View Related
Nov 30, 2012
I have a block that i want to insert several times and revised each one to be different to do this i would have to insert it and rename the blocks that come in and then reinsert i would like to insert and have a lisp explode the main block and rename the other 2 blocks with a suffix at the end depending on how many times its in the drawing... can this even be done? My original block name that will be first inserted is "BENT PULLEY NOTES" it needs to explode after i drop it in and then there are 2 blocks within that called "Bent Pulley" and "Bent Pulley DYN" that i was hoping to keep the names but add a number at the end depending on how many are in the drawing already...
here is a lisp that i have found... it would work if i didn't have nested blocks and only wanted the one block to be insert and not explode...
(defun c:Test (/ e i name Bname )
(setq e nil)
(command "_.-insert" "Drawing1.dwg" pause "" "" "")
(if (setq e (entlast))
[Code] .......
View 9 Replies
View Related
Aug 24, 2011
Here's my situation:
I have a block named "WIDGET-A". And in that block are (4) attribute tags whose names are:
"ID"
"TAG01"
"TAG02"
"TAG03"
The user will be prompted to pick the value displayed at any of the "TAG##" attributes - they will select the attribute tag they want (we don't know which one it is, we just want to assign that value of the attribute tag they clicked on to a variable called "VAR2".
Now, what we also want AutoCAD to evaluate, behind the scenes, is the value of the attribute tag named "ID" which we know always exists in the block and then assign that value to a variable called "VAR1".
Is there a way for AutoCAD to do this all from only a single user pick on top of an attribute value, in a block whose name isn't always going to be 'WIDGET-A' either.... But the block, whatever it's name, will always have the attribute tag "ID" with a value in it, and we always want to capture the value of whatever attribute tag within the block that the user clicked on.
View 2 Replies
View Related
Jun 17, 2013
I need a lisp sub-function that can empty all attributes of a specified dynamic block. The idea being that the specified block contains data that changes often and in order to repopulate the block's attributes with new data to replace the old I wish to just blank out the old data first, because it's possible that the new data may not utilize as many attributes and all of the old data must be removed.
The thing is the block I'm after is on several layouts, CTABs and they all need to be wiped clean.
View 9 Replies
View Related
Aug 6, 2013
I have a block named "WD_MLRH". There are 3 specific attributes which I want to change in it. The attribute names are.
RUNGCNT, RUNGDIST and RUNGFIRST.
RUNGCNT will = 20
RUNGDIST will = 1.0 (or 1 will suffice)
RUNGFIRST will be decided by a user input.
Something along the lines of...
(setq RUNGFIRST (getint "Enter first rung number: "))
I'm sure this is completely wrong, but i hope that portray what I'm trying to accomplish.
View 9 Replies
View Related
Sep 26, 2013
I have a routine that counts dynamic blocks by visibility state and stores that information then prompts for scale and color and stores that information. Then a legend begins to build from the data and a collection of blocks to reflect the dynamic blocks and their visibility state. Everything works great on all of the machines around the office except on one. When the legend begins building, the one user is getting the DDATTE dialog instead of allowing the values to populate as expected. So, I had him change ATTREQ to 0 an run again. No deal, the same thing happens again and again. And; it only occurs on the one machine.
View 5 Replies
View Related
Nov 3, 2013
How I can modify this code to create a block, ask for a new name for the block, then add the attributes listed inside the code below to the new created block. The lisp does a wonderful job - however, it only works if you already have a block created. We are in the process of drawing components and making blocks one by one, so it makes sense to add the attributes automatically when the block is created. We currently have over 500 components to create as a block and set the attributes to each one by one.
Also I would like to know, If Fields can be used inside the lisp routine. That way we can always have access to the attributes from outside the block and change values for all the blocks at once.
(defun c:addattribs ( / blk def ) (while (not (or (= "" (setq blk (getstring t "
Name of block to update: "))) (tblsearch "BLOCK" blk) ) ) (princ (strcat "
Block "" blk "" not found.")) ) (if (/= "" blk) (progn (setq def (vla-item (vla-get-blocks (vla-get-activedocument (vlax-get-acad-object))) blk)) (vla-addattribute def (getvar 'textsize) acattributemodelockposition "New Attribute 1" (vlax-3D-point 0 0) "NEW_TAG1" "New Value 1" ) (vla-addattribute def (getvar 'textsize) acattributemodelockposition "New Attribute 2" (vlax-3D-point 0 (- (* 1.5 (getvar 'textsize)))) "NEW_TAG2" "New Value 2" ) (command "_.attsync" "_N" blk) ) ) (princ))(vl-load-com) (princ)
View 9 Replies
View Related
Aug 8, 2012
I know how to retrieve the entity information from the block, but can't figure out how to write the loop statement to loop, look for first attribute, assign to a variable, goto next attribute, assign to different variable, etc., etc...
In my research, most programs I've seen it execute the loop, assign to a variable, then print/put that data somewhere, loop again and utilize the same variable to print/put the next data somewhere.
I would like each attribute within a block to be assigned a separate variable.
View 7 Replies
View Related
May 9, 2013
I have 40 pages in one set of drawings and would like to rev-up the drawings. i will put same texts in same locations in the title blocks.
View 9 Replies
View Related
Apr 22, 2013
I am trying to insert one or another block into a drawing, and i need to do this 8 times per drawing.
(defun C:detector (/ filename gas pressure)
(repeat 8 (initget 1 "Gas Pressure")
(setq filename (getkword "
Enter Detector Type [Gas/Pressure]: "))
(if (= filename "gas") (command "-insert" "*T:\acad\schematic_circuits\suny\sunygasdetectornew.dwg" pause "" "")
(or (if (= filename "pressure")
(command "-insert" "*T:\acad\schematic_circuits\suny\sunypressuretransmitternew.dwg" pause "" ""))
) ;;end or
) ;;end if
) ;;end repeat
)
View 4 Replies
View Related
Aug 2, 2013
Any way to insert a block onto many different drawings quickly? I have a title block I need to insert into about 100 drawings. It seems very tedious to open each drawing and insert 100 times.
View 3 Replies
View Related
Oct 15, 2013
I tried to adapt the code provided by scottbolton in the "Insert block at intersection" thread to suit my needs. I would like to be able to enter a block name, and let that block be inserted at intersection points.
But i keep getting a DXF error.
(defun c:sbx (/)
(vl-load-com)
;;;define block used in program
(setq bloktype (getvar "USERS5"))
(prompt "asiswaarde: ")
[code]......
View 9 Replies
View Related
Apr 19, 2013
I need a routine that inserts a point at the insert point or block named "Insert_Point" at every block in the file. The routine could use the current layer, which would be set prior to starting the routine. If it could request the user for the PDMode value and PDSize that would be great too. This will assist me in creating block libraries.
View 9 Replies
View Related
Feb 25, 2013
I have several title blocks each in their own paperspace pages. Could have the attribute filled in, but more than likely only one page will have values filled in the attributes. I am looking for a VL method for finding which pages title block is filled in so that I can get those values and fill in the equivalent attributes for all of the other pages. Currently I am using a long set of :
(IF (setvar "ctab" "8.5x11") (IF(TBLSEARCH "BLOCK" "TB-8.5x11") (IF (/= "" (get-att "OWNER" "TB-8.5x11")) ; Function to read a named attribute(editblk "TB-8.5x11") ; Function to pull up the attdia(IF (setvar "ctab" "11x17") (IF (TBLSEARCH "BLOCK" "TB-11x17") (IF(/= "" (get-att "CUSTNMFIRST" "TB-11x17")) (progn ; At the last page ditch the [Code]..........
The example is just a very simplified version of what I'm doing. I just need to find the information, if it exists in any page and store it for later. Afterward, I'll fill in each page's Title Block with the stored information.
I know that this can be done much more efficiently. As I am currently flipping through the pages too much action is occurring on the screen and it makes some people nervous. With VL I should be able to run the search quietly, but I would still like to (setvar "ctab" "to the page with the filled attribute value") after the LISP is finished storing values.
View 7 Replies
View Related
Jan 3, 2012
1. I want to all selected profiles or blocks set to one object, than continue to select second object,(see attached drawing file). How to write the "ssget" lisp.
2. Command "line" ask me specify next point.
3. Found object boundary prompt me to "select oblect", when i selected profile, with the error: bad argument type: consp.
View 5 Replies
View Related
Mar 27, 2012
I am working on a lisp file that lets you select a block and automaticaly change the layer and color in block editor. Afther this it exits block editor, deletes the original block and places the new one.
It works fine accept for the last part.
When i incert my new name whit the insert command it automaticaly changes the name whit autofil so it wil still pot my originial block (the new block name is only two characters shorter than the old one).
View 5 Replies
View Related
Feb 19, 2013
We are using autocad 2010 and I have written a routine that will insert several blocks on to several layers. I thought it worked flawlessly, until I used it. Our drawings use layer states. When one state is in use, all the other layers are frozen. We want to insert a block, at a specific point chosen by the user, and the lisp routine will insert a couple of other blocks at that same point, but on a layer that is frozen. Three blocks installed in all, at the same point, on two layers. The routine works if all layers are thawed, but not if the layers are frozen.
(defun c:lP1 () ; this starts the routine
(setq temperr *error*) ; saves *error*
(setq *error* rerr) ; sets the new error variable
(command "_.Undo" "_mark") ; start of "undo" command
[code]....
View 8 Replies
View Related
Feb 23, 2008
I figured out how to entmake a Block with attributes based on user input for insert point, rotation, etc.
My block is a detail bubble that is a circle with a tail, that cuts the object and shows direction of cut. I will include that with this post.
My problem lies in this. I've used dynamic block features such as linear for the tail length, and the cut length, and angle for the direction of the tail.
My old routine was simple, it would ask for detail point and angle. From that it would insert a block that was just the bubble and draw the tail and cut with a polyline.
Since then I've been able to use entmake, which is a lot more powerful for creating entities in AutoCAD. But for the life of me I can't figure out how to add the dynamic properties of my "new" detail block that has the tail, cut and bubble in one.
what I need in the entmake statement to make this create programmatically instead of inserting the block, then modifying it, if possible.
View 9 Replies
View Related
Sep 26, 2013
take a look at this piece of my LISP-routine.
(command "_.block" pause pause ss "")
where:
ss - is a Selection set of some entities
In the rest of code, I don't change the values of initdia, or cmdecho, or whatever else
I haven't sill understood them that well.The problem is the following:
When My routine executes this line, I am promted for:
1. block name - that's OK
2. insertion point - that's OK
3. then the block-command receives correctly the entities from ss-selection set - that's OK
4. then all the object dissapear! **Problem here**
The block is created... I can insert it in the drawing from the block-data base...
But is there a way to let this block stay in the drawing ? without disappearing?
View 2 Replies
View Related
Jun 28, 2013
I got this code in a web trawl to insert a block to points taken from a txt file......
its coming back with an error as follows:
; === Top statistic:
; Function definition (with number of arguments): ((C:INSERTBLOCKS . 0))
; Check done.
What does this mean and how can I fix it.
(defun c:insertBlocks (/ txtFile xyData expertVar attreqVar)(setq expertVar (getvar "expert"))
(setq attreqVar (getvar "attreq"))
(setvar "expert" 2)(setvar "attreq" 0)
(setq txtFile (open "c:\cad\textfile.txt" "r")) ;
[Code] ......
View 3 Replies
View Related
Jan 28, 2012
I would like to insert a block in a specific layout (eg. "LAYOUT13") using the function vla-insertblock
I have already searched the web and this newsgroup but have not found the solution.
View 3 Replies
View Related
Feb 15, 2013
When scanning the BTR (Block Table Records) and encounter a "*U" block definition
how can i know if it relate to dynamic block and have it's name?
acutally my current goal is:
when insert a dynamic block at default state (no change in it's dynamic properties/actions)
it's 'Name and 'EffectiveName is equal, when set some of it's properties it turns to dynamic anonymous
with Name = "*Unn"
Can i programaticlly set the block reference to be dynamic anonymous (with out setting any of it's properties)
cause i would like to modify it's BTR (with out effecting the original BTR dynamic block) but do not want to convert it to static anonymous block.
View 2 Replies
View Related
Sep 22, 2011
I am starting with a polyline then i use the pasteblock command to insert that polyline as a block.Now i can pull up the property box and change the xyz scale.
I would like to know how to change these setting in my lisp.The scale will be x=1 y=0.1 z=1
View 7 Replies
View Related
Dec 27, 2011
I have been working on an AutoLISP routine which is intended to:
1) collect input from the user via a DCl dialog box
a) Create a List of the non-null "GROUP_CODE..." variable values collected from the dialog's settings
b) Create a List of the "ESN***#_Part" variable values collected from the dialog's settings (does the List elements' order need to be reversed after collecting them?)
2) Prompt the user to select an insertion point
3) Insert a Block named "ESN-CONTROL-WIRED" which has multiple attributes
a) Apply the first List element collected at step 1.a above to the attribute tag "INPUT_ADD" in the block
b) Apply the first List element collected at step 1.b above to the Attribute Tag "PART_NUMBER" in the block
4) Insert a second instance of the Block named "ESN-CONTROL-WIRED" below the first instance
a) Apply the second List element collected at step 1.a above to the attribute tag "INPUT_ADD" in the block
b) Apply the second List element collected at step 1.b above to the Attribute Tag "PART_NUMBER" in the block etc. .... keep inserting the block "ESN-CONTROL-WIRED" below the previous on until all the input from the dialog has been displayed in the attributes.
Notes:
The Dialog's pop-up lists are populated from external .TXT files which reside on our network (or alternate local C: drive folder if no network drive is found)
Inside the file "ESN_SENSORS_NUMBER.LSP", it is the function "ESN_APPLY_TAG" which I am struggling with how to write...
find inside the .ZIP file:
- (2) example screenshot .BMPs showing dialog box settings and what the resulting output in AutoCAD should look like
- (1) ESN_SENSORS_NUMBER.LSP
- (1) ESN_SENSORS_NUMBER.DCL
- (1) ESN_SENSORS_NUMBER.DWG with a sample output - and the definition of the block ESN-CONTROL-WIRED
- (1) ESN-OCC.txt which populates the PopUp List Boxes
- (1) ESN-DAYLT.txt which populates the PopUp List Boxes
- (1) ESN-IR.txt which populates the PopUp List Boxes
View 6 Replies
View Related
Sep 19, 2012
I am trying to insert a norht block oriented on two selected points with the following
(defun c:North ( / ss )
;Orientate North Symbol
(setq oldos (getvar "osmode"))
(setq blk (vlax-ename->vla-object (car (entsel "
[Code] .......
I am not sure how to (a) erase the selected north block, then (b) make the insert north block in its place bit work.
View 6 Replies
View Related
