I'm creating a deployment for AutoCAD 2014.
At the end of the deploy process I'd like to end up with a custom AutoCAD shortcut on the desktop that calls an ARG file. This is no problem.
The problem is that to get that shortcut I need to check the "create desktop shortcut" check box and then I wind up with 2 shortcuts on the desktop, the default "AutoCAD 2014 - English" and my custom shortcut.
I want to make a keyboard shortcut that will turn on/off my osnap, polar, and otrack.I would be fine with setting F3 to do this, or any other key really.I like to be able to turn these off on the fly, but it is getting old having to press all three.
View 7 Replies View RelatedI want to create a shortcut key (like TAB) for example and whenever I start a polyline or move or whatever, I can hit TAB which will grab the angle my cursor is at, and then use the angle lock to lock the cmd into that direction. (This is essentially what can be done in rhino if you are familiar with this).
The manual way in autocad is typing it ("<45") but I just want to calculate angle from the start point to cursor point. and then once hitting tab or a key or a new command, it will lock with that angle. How can I go about programming this.
I'm trying to include the Autodesk 360 SP1 in my 2014 deployment. Its working fine but it prompts for a restart and I'd rather not require user action to complete the install. (the users here restart frequently enough to deal with this anyway)
I have tried the following switches in the parameters section to no avail:
/s /qn
/s /v/qn
/s qn "REBOOT = ReallySupress"
/s /v/qn "REBOOT = ReallySupress"
My company is in the process of upgrading to AutoCAD 2013 (yes, I know 2014 is out, but IT won’t let us get the most recent because of fear of “new release bugs”). My company is small and our CAD Standards/Management is less than desirable. Over the past few years I have become the unofficial company CAD Manager and have slowly been getting us up to speed with using the latest capabilities and following best practices.
An issue that I deal with constantly is a new user not having the correct registry-saved system variables set up. This also happens a lot because our IT guy frequently reinstalls AutoCAD to fix issues. Every time AutoCAD is installed/reinstalled, all the registry-saved system variables are set to their default values. We have several that need to be set a certain way to match our current drafting standards (a few examples: .bak files turned off, plot.log files turned off, advanced attribute editor turned on, plot area relative to edge of paper, etc, etc.). Typically, I will get complaints from users about something not working correctly, and then I will troubleshoot the issue and eventually find out that they just had their AutoCAD reinstalled and their system variables are not set how they should be. Then I will get out my list and have them set all the variable s properly via the AutoCAD command line.
I have read up on creating AutoCAD Deployments (and we will be using these Deployments for this upgrade), but there does not seem to be a way to set variables when creating the Deployment.
Finally, to complicate things a little more, most of our users actually use AutoCAD LT (so no Lisp), and only a select few (like me) have full AutoCAD. So, we will be creating two separate Deployment files as it stands (which is not a big deal).
Some of my preferred criteria for the solution:
-Solution can be used for both AutoCAD & AutoCAD LT (I’m okay with there being two separate system variable “deployment” files since we will already have two different AutoCAD Deployments. I would just like the procedure for deploying both packages to be the same regardless of whether it’s for LT or full version).
- Solution would be able to be applied to each workstation without opening AutoCAD on each machine (and ideally, it would all happen when the AutoCAD Deployment installer was run!)
Is there any current best practices for accomplishing this? (maybe by changing the registry through batch files, VBscript files, etc? Or using AutoCAD script files – however, this requires the program to be open to run, which I was trying to avoid).
I want my application to include a useful Ribbon interface that displays custom properties, read from my custom objects.
I have found the existing Ribbon Control Elements, but I want to use custom controls, not the pre-canned controls.
Is there a generic programmable input box for the AutoCAD Ribbon?
i'm relatively new to lisp routines. I've been trying to create a routine that will create a custom block with attribute with an option to select which drawing border size is being used. This is what i've got so far;
(defun c:NEW_REV_NOTE ()
(PRINC "
Drawing Size:")
(SETQ Paper_Size (GETSTRING "
[A1/A3] <A1>: "))
(IF (= Paper_Size "A1")
[code]....
I'm going wrong at the moment I get an error message when I try to load the file "; error: syntax error".
I am trying to create a custom complex linestyle for a stream. It's a line with 3 circles/dots. For the dots I want to actually create the circles. I know how to create shapes, compile and load linestyles. For some reason it does not work.
*STREAM-UCS, WATER BODIES -----ooo-----ooo-----ooo-----ooo-----
A,.6,-.15,[STREAM,ucs-ltype.shx,x=0,s=1],-.15
*1,1927,STREAM 4,250,4,4,3,167,3,13,3,176,002,9,(-51,0),(0,0),001,9,(0,3),(-3,3),(-1,0),(-1,1),(-2,0),(-1,-1),(-1,0),(-1,-1),(-1,0),(-1,-1) (0,-1),(-1,-1),(0,-4),(1,-1),(0,-1),(2,-2),(2,0),(1,-1),(2,0),(1,1),(1,0),(1,1),(1,0),(0,1),(1,1),(0,3),(0,0),002,9,(-3,-6) (0,0),001,9,(2,2),(0,0),002,9,(-2,-2),(0,0),001,9,(2,3),(0,0),002,9,(-2,-3),(0,0),001,9,(3,3),(0,0),002,9,(-4,-3),(0,0) 001,9,(4,3),(0,0),002,9,(-4,-3),(0,0),001,9,(4,4),(0,0),002,9,(-4,-4),(0,0),001,9,(4,4),(0,0),002,9,(-4,-4),(0,0),001 9,(4,4),(0,0),002,9,(-5,-4),(0,0),001,9,(5,4),(0,0),002,9,(-5,-5),(0,0),001,9,(5,6),(0,0),002,9,(-5,-6),(0,0),001,9,(5,6) (0,0),002,9,(-5,-6),(0,0),001,9,(5,6),(0,0),002,9,(-6,-6),(0,0),001,9,(6,6),
[code]....
I am trying to create a custom message box with variable width and height by passing width height title and list of text. I can get the routine to work if I use preset width and height, but would like to make the box adjustable.
Here is what I have so far -
;--dialog box--
MYmessage :dialog{
label="Custom message box";
:column {
:text {
key="MY_message_Title";
fixed_width_font=true;
[code].......
Could a .lsp file work with the block editor so that double-clicking a block will make it skip straight to the editor without displaying the "Edit Block Reference" dialoge?
View 1 Replies View RelatedI have made an extra CUI that is loaded as a partial CUI.
Now I want to add a context-sensitive shortcut menus like this: POP504, OBJECT_AEC_DOOR.
The problem is that this shortcut menu only shows up if I add the shortcut menu to the main CUI file. If I add it in some partial CUI it never shows.
Does shortcut menus only work from within the main CUI?
I want to know how to change subcommand shortcut
When I do a Polyline, after i done an arc section, I would like to be able to press "F" instead of "L" to do a line section...
Is there an easy way to do that or do I have to reprogram a new Polyline command in lisp with the subcommand shortcut that I would like? (would prefer to avoid it as sometime I have to work on LT)
The reason behind all of this is that I remapped all my command to keys that are on the left side of the keyboard ... it work really well and I almost never have to lift my left hand except for the case with the polyline... the L key is miles away ...
Right now I remapped a button on my mouse to "L" but its not as natural as just using the keyboard...
I'm able to add custom panels/buttons into the Ribbons, by cloning the existing ribbon (from acade.cuix) into my partial cuix. However.. I'm not able to add more commands to the shortcut menus, using the same technique.
Is it possible to add custom commands to existing shortcut menus using a partial cuix?
I was on an older cad and am now moving to 2014.. my previous cad was heavily customized the old school way, I have decided to learn the CUI (and dynamic blocks)
My old cad has blocks on a drop down menu.. click BATH menu than WC icon, a macro sets the correct layer than inserts the WC.. took time to setup but pretty simple and straight forward (see attached for menu syntax). I also made a toolbar BATH and on that toolbar I made a WC icon.. that’s what I use the most
couple of questions
1) do I have to make a new command in CUI for each block to do the same thing?
2) I looked into the design center, but seems like its too many steps but it seems a toolbar with an icon on it, clicking the icon and a macro sets layer and insert block is still pretty quick..??
3) if a toolbar with an icon is still a fast and less step method, can I open the block and somehow make an icon of it? if so where do I put it?
I've successfully written a lisp routine to insert a scale bar dynamic block with attributes, gather the object id of a user selected viewport, and write fields to attributes for each of the numbers across the top of the typical scale bar as well as the scale name, for both architectural and civil units. I'm trying to come up with a similar dynamic blocklisp routine combination to do the same with view titles, and the associated scale callout. The catch in this case is that I'd like to display the scale as "NTS" if it isn't a proper scale. The "standardscale" object property option in the field dialog box gives me almost exactly what I want, except that non-standard scales are displayed as "CUSTOM" as opposed to "NTS". Moreover, I’d like this to update on the fly, if the viewport scale changes, the scale callout needs to change also, back and forth from “NTS” to a standard scale if need be.
is there a way to change that (CUSTOM NTS)? My research online seems to indicate that the nuts and bolts of fields are deeply rooted in ObjectARX, which is something I know very little about?
The natural followup to that question is, if I can't change "CUSTOM" to read "NTS", is there a way to wrangle this whole thing with reactors? I'm envisioning object reactors, created as a part of the insertion routine, for each individual instance of the block (there could very well be several in a layout, and multiple layouts in detail drawings), that would call another routine to evaluate the viewport scale, and if it didn’t match a list of standard scales, write NTS to the attribute. My issue is that reactors seem to only associate with one object, in this case that’d be the viewport, the reaction would cause the reactor to call the routine, but how does the routine know which block to update? Is there something from the viewport properties that I can add to the block name (or some other property) which will allow the routine to figure out which block to edit?
I’ve attached my scale bar code, and block, as reference context for how I plan to set the view title up.
I use DwgProps > Custom tag to log revisions to our company templates.Then when trouble shooting CAD issues I can look at what template rev level the drawing was started from.
Is there anyway that DwgProps can be removed from the drawing?
I am not looking for a solution to do this... I just wondered if there could be someway a particular drawing file might have somehow lost the DwgProps > Custom entries.
I'm trying to get familiar with AutoCAD. Google and didn't manage to solve a problem :
In AutoCAD LT 2013, I created a custom command called Special fillet :
Name : Special filletDescription : Round a polylineCommand display name : SFILLETMacro : ^C^C_fillet;p;r;0.1
I created two aliases at the end of acadlt.pgp :
SF, *SFILLET
C, *COPY
When i type C, it works fine (just a test) but although it appears correctly in the Command prompt, SF doesn't work and it keeps telling me : UNKNOWN COMMAND "SF"
Last thing, if I create an icon in a toolbar with the special fillet command : it works fine...
Is there any way i can create my own custom balloon notification to alert the detail of any new or updated menu items?
View 2 Replies View RelatedI have tried everything even un-installing and re-installing. I have customized programs that have been working properly for months by many individuals. These include custom menus, toolbars and ribbon tabs. One day last week one of the ribbon tabs disappeared. The crazy thing is if I load the .cuix file as an Enterprise cui, everything is visible and works just fine. BUT, when I load it as a partial cuix file the ribbon tab does not show up. The custom menus come in, my custom toolbars work and show up just fine but the dag blasted ribbon tab won't show up.
Yes, it's marked as visible. I've done and redone the cui editor, customized my workspace again and again checking every piece of information. I need to have it loaded as a partial cui file as I am the author of these tools that hundreds of people in my company depend on.
How to add buttons and create my own ribbon in AutoCAD, but now I would like to be able to have buttons for two different schedules that I have created. While I can have a button start the schedule command it won't automatically pick the schedule that I want it to create.
View 1 Replies View RelatedI would like to build a custom button that mimics the FDO - Save as AutoCAD drawing functionality. Clicking this button brings up a wizard with too many clicks for how often the users will do it.
They will not want to load a script so a custom button is required. Also, I need to be able to dynamically set the new saved file name based on the source DWG file name.
I'm trying to write a simple Custom Command that sets any layer that matches "$-*" to a specific color. But as soon as AutoCAD sees the $, it thinks I'm trying to do a DIESEL expression. Supposedly, the quote marks specify that the enclosed characters should be treated as plain text, but that doesn't happen.Here's what I've got:
^C^C-LAYER;C;252;"$-*";;
And this is what I get:
Command: -LAYERCurrent layer: "$-HATCH-00-002-PW-BOAT"Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]: CNew color [Truecolor/COlorbook] : 252Enter name list of layer(s) for color 252 <$-HATCH-00-002-PW-BOAT>: "No matching layer names found.Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]:
It stops, hanging at the incompleted -LAYER command prompt.
I have a problem that I cannot seem to solve. I have a drawings with a whole bunch of layout tabs that have a few viewports in each tab. One of these viewports on each layout tab is on the layer VIEWPORT. I did this so it would be easy to filter out the other viewports in the drawings. I am using the code below to change all of the viewports with the layer VIEWPORT to the Custom Scale 0.020833. This works for all of the layout tabs except the first tab. It will not for some odd reason work on the fist tab.
(setq vieportfilter (list (cons 0 "VIEWPORT")))
(setq ssetvp (ssget "x" vieportfilter))
(setq cntrp 0)
(while (< cntrp (sslength ssetvp))
[code]..........
how to access custom drawing properties using LISP. It was in a discussion initiated on 01-06-2011, subject: Custom drawing properties.
One solution was to use the following method:
(setq si (vla-Get-SummaryInfo (vla-Get-ActiveDocument (vlax-Get-Acad-Object))))
(vla-GetCustomByKey si "DWGPROP1" 'pval)
(princ pval)
Now taking it a step further, using LISP, how can I "update" my custom drawing properties?
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
How I can tie a key from a custom dictionary to display in a field?
I know that I can dump the custom dictionary into global and the fields can track those values, but instead of strangling my available memory I'd rather track the dictionary key directly. How can I utilize the Entity name or the actual dictionary name & key?
I have a custom linetype that's just a series of arrows I want to use to show the flow of a ditch. I've played around with this thing for a while and have these dots at each end of the line that shows up when I print.
Is there any way to make this linetype without the dots at each end? the actual files for the line type.
FLOW.lin
*FLOW,A,0,-.002,.148519,[FLOW,FLOW.shx,s=1],-.449481
AutoCAD 2012
When I am in the CUI editor and I right click on a button in a custom tool bar, it gives me the option to "duplicate" or "copy".
But when I go to change the properties of the new button, it changes both the original and the new button upon "apply".
Can I just add a new/blank button? I've tried dragging a new command from the list at the lower left corner but it does the same thing. :?
We have been using Custom profiles for many years. We have always had issues that just after we install, we have to reload the custom profile to get it in place. When I say reload, I mean we launch the program the first time with a /p <profile name>. (The path to our custom profile is in the string launch string.) Seems to default to a random profile, or something we don't recognize. The process here is we are pushing out installs to 200 users and don't want each user to set one of the defaults current, delete our custom one, reload our custom one and set it current.
Once the profile is loaded the next times opening all is well. Because, of course, it was last used.
What am I missing or misunderstanding? We see the profile exists in the registry before we reload. The custom profile we use is an export.
I am trying to find a command that will pull up a dialogue box with all layers that are frozen and be able to select one or more to thaw from that list. I hate the layer manager, it's too slow especially when I have a ton of layers to deal with.
View 9 Replies View RelatedGoal: using the native windows explorer, Open the folder containing the the multitude of drawings from different vendors and customers, usually 30 -40 .dwg files.
Highlight all the files, Right click print.behind the scenes without any further clicking or involvement from the user autocad plots the extents of model space of all the drawings to a designated plotter fit to 11x17 sheets.
Acad 2012
Win 7
I am wanting to build an installer to deploy some custom hatch patterns. Getting the hatch patterns onto disk is easy; however, I need to add this location as a support path (presumably via a registry entry) but the number of potential registry entries is huge given the combination of AutoCAD releases and verticals. The other option I had was to deploy the hatches to the same location as ACAD.PAT and search for this location during installation.
FYI - I plan to use Inno Setup but am not opposed to another installer.