AutoCAD Inventor :: Speeding Up Constrain Execution
Oct 19, 2012
SO what is everyone say, trick about speeding up constrain execution. I have started working on this new project with 2013. And i'm finding myself losing alot of time. Basicly what i do is insert part from our database or content center and assemble them. So 80% of my activities on inventor are constraints. Right now i have this assemblies 175 / 156(small to me). And executing a constraint is minimum 4 seconds each time. If you consider that about 3 contraint is needed for each piece and final total part will probably be around 1000. i'm losing alot of time here
Yeah, i am not using preview. Why is inventor recalculating that much each time? Is it doing a rebuilt after each constraint?
What have you done that really increase the excution time of constraints?
Workstaion is
Windows 7 64bit
Intel Extreme i7cpu I975 @ 3,33
12bg ram
4 ssd in Raid stripping.Nvidia FX3800
Inventor 2013 SP1
View 9 Replies
ADVERTISEMENT
Jan 26, 2012
Delaying a rule execution in inventor 2012 iLogic. I have a large number of rules that are supposed to be run sequentially. I have noticed rules that quite large numbers of suppression commands takes longer than others, so what's been happening is ilogic runs a rule while its still going through suppressing or unsupressing, it also tries to execute the next rule and results in errors.
A way to put time delay between execution of rules to ensure the preceding rule has finished its task, before the next one is executed.
View 1 Replies
View Related
Nov 9, 2011
So 2011 had some issue and I though 2012 would get those fixed. I was wrong. More problems occur. With 2011 I was able to open assemblies directly through vault. Now with 2012, since the vault issue updates as it opens, I crash on any sizeable model or assembly. So now just to open a file, I must get it, then go to inventor and open it, and hit no when the refresh window come up. If I hit yes, it crashes. If I hit no it open, then if i hit local/global update it crashes. So technically I cant do any new work with any of my larger assemblies (2000+ parts) I have sent out numerous error reposrt, only for autodesk to say that they can replicate the problem. I have SP1 installed, and this is happening with other users at my company as well.
System:
Windows 7
64 Bit
Solid State HD
24GB RAM
Xenon Processor
Nvidia Quadro FX 580
View 1 Replies
View Related
Jan 30, 2014
I work for a small design/build firm that works primarily on large, custom residential buildings. The majority of our design work is done in 2D because the majority of our plans come in 2D from the architects.
I was wondering what the best way to speed up our duct drawing would be? We are currently running MEP 2014 but only use it for the straight cad portion of it. We don't have any blocks for the fittings or routines to draw multiple lines at once. We are open to pretty much anything at this point, whether it's developing or purchasing a set of blocks, lisp routines, plug-ins, etc.
View 9 Replies
View Related
Jun 26, 2012
I've managed to hack together some code to draw a rectangle and dimension it. Now I want to constrain it to the origin. I figure either using two dimensions from a top/side to the origin and setting the dimension as half of the other respective dimension would work. Or constraining the center point of a top/side line to be vertical/horizontal to the origin.
The problem I'm having is I do not know how to reference the origin. So until I figure out how to reference the origin point I can't use either method.
Public Sub DrawSketchLine() ' Check to make sure a sketch is open. If Not TypeOf ThisApplication.ActiveEditObject Is PlanarSketch Then MsgBox "A sketch must be active." Exit Sub End If ' Set a reference to the active sketch. Dim oSketch As PlanarSketch Set oSketch = ThisApplication.ActiveEditObject ' Set a reference to the transient geometry collection. Dim oTransGeom As TransientGeometry Set oTransGeom = ThisApplication.TransientGeometry Dim oUOM As UnitsOfMeasure Set oUOM =
[Code].......
View 2 Replies
View Related
Oct 28, 2011
I've made 2 parts and I'm attempting to constrain them but I can't seem to get it to fit properly.The transition should fit at the opposite end of the 2 square cutouts with the square end of the transition inside the cylinder.
View 7 Replies
View Related
Feb 28, 2013
I am trying to CAD a model rocket I just made so I can test the aerodynamics of it. I have all of the individual parts made in inventor, but I am having trouble getting the fins on the rocket.
How can I constrain the fins (which have a flat face) to the outside of the cylindrical rocket tube? The photo shows the fin and the face (the narrow and long face) that I am trying to constrain to the tube.
View 7 Replies
View Related
Sep 5, 2013
How to become able to fully constrain a sketch with an image in it? Always stalls at 1 dimension required. Try a sketch with only an imported image.
View 2 Replies
View Related
Dec 31, 2012
I am trying to determine how to properley constrain the assembly below, so that the compression of the rubber gasket will be properly indicated.
Currently I am seeing the deflection of the shelf in the downward direction, but I do not see any indication of stress in the gasket behind.Currently the gasket is "bonded" to the steel tube the screws are bonded to the shelf bracket and the steel tube.
I put in "work axis" at the center line of the shelf bracket and the CL of the gasket, but I can't find a way to constrain to a work axis.The file is too large to upload here...
View 1 Replies
View Related
Jan 9, 2013
I have one problem and I would like to get your opinion how I could solve this.
I can't share models I have problem with, but I made another with the same problem.
I have two parts - one with slot, another with "pin". How to constrain the "pin" to always move in slot?
I had some ideas but non of them worked for me:
1. Use the Transitional constrain came first in mind, but it gives unsuspected results in this situation. Pin part is jumping around and ends up contrained in another place ir should be.
2. Contact solver kind of do the job, but it works quite bad. I gives no control or accuracy (i can not control how much pin is moved out)
3. I even thought of point on 3d sketch constrain, but it can not be done
How you would suggest to constrain the movement? I hope I stated problem clear enough.
I attached model files. I use Inventor 2013
View 4 Replies
View Related
Nov 25, 2012
I'm trying to make a constraint allowing the dark smaller cylinder (1) to run in the copper track (2). I want the larger cylinder (3) to be able to rotate around its own axis, while everything is rotating around the Z axis. I've successfully constrained the parts so that all the parts can rotate around the Z-axis but when I constrain the smaller cylinder (1) with the tangent constraint with the track (2) the smaller cylinder is not able to move around on the face, it's just glued to the face.
I want the smaller cylinder (1) to recognize the copper faces as solids (so that it can't intersect the surfaces), this would allow the proper movement. I've attached an image of the parts.
View 1 Replies
View Related
Dec 1, 2011
How is this accomplished in Inventor? The 3D sketch environment seems intentionally crippled. Many of the constrains are not available, and the "include geometery" command refuses to include the origin (or any other planes and axis for that matter).
View 4 Replies
View Related
Jan 10, 2012
What is the difference between Constrain and Assemble?
They both seem to create the same mating constraints, but Assemble doesn't work with adaptive parts.
Any other difference (other than the interface)?
View 1 Replies
View Related
Apr 5, 2013
Is it possible to constrain sketch entities, (like lines), to a plane, (make the line and plane coincident)?
View 2 Replies
View Related
Aug 4, 2013
Is it possible to have a tangent constrain on multiple curves?
see enclosed rough sketch, i would like the curved free end or the arm to be in constant contaced with the wavey top line on the other part, the wavey line is constructed as 3 curves but i can only get the tangent constrain to apply to one of the curves.
i would like the tangent constraignt to move between the curves so the part stays in constant contact with the wavey line. this is just a mess about sketch i suppose a real world instance will be a wheel following a shaped cam plate.
View 2 Replies
View Related
Oct 22, 2012
I have a sketch that Inventor changes its status between under constrained, over constrained, and fully constrained depending on dimensions (makes sense), and wether I rebuild the model (WTF?).
Steps to reproduce:
1) Open the attached .ipt file.
2) Examine Sketch11 (under Face3) It should be fully constrained.
3) Exit the sketch. Open the parameters dialog and change the value of "angle" from 45 to 60. (If you get an error message change it to 50 first, then 60. It's a work in progress.)
4) Re-examine Sketch11. It is now under constrained.
5) Exit the skecth and go to the manage tab. Click "Rebuild All".
6) Re-examine Sketch11. It is now fully constrained.
7) Scratch your head and post back with your theory.
View 7 Replies
View Related
Nov 23, 2012
I have an assembly with a curved line made in a sketch, and a part with a point in the bottom.
I want to constrain the point to the curved line, but the regular Constrain options wont let me do so.
I am making an animation with Inventor Studio, so I need this constrain, so I later on in studio can manipulate it and insert the first part into the other.
View 2 Replies
View Related
Jun 14, 2012
In Auto desk inventor how to check assy was fully constrain and whick comand to use to check ?
View 4 Replies
View Related
Jan 13, 2012
How you constrain a section view so that is perpendicular to an axis. See "SECTION B" on the attached drawing for an example of what I am attempting. I have created the view but cannot make (constrain) the view perpendicular to the slot that is orientated at 30 degrees from the vertical centre line. I have lined up the view by eye so it looks close but it's obviously it's not accurate.
Product Design Suite
Inventor Premium 2012 - SP1 Installed
HP 8760w I7-740M Laptop
Windows 7 Professional 64
12 Gb DDR SDRAM
AMD FirePro M5950 Graphics Card
View 1 Replies
View Related
Nov 22, 2011
After installing the cloud-optimization-upgrade for subscription customers I cant export video from "drive constraint".I click the "record" button, I choose the name and quality of the video and when i then return to the "drive constraint dialog box" I get an error message "The file constraint.wmv could not be opened".
I have tried different names, storage locations and different video-quality but nothing changes.I successfully performed the same video creation just before the upgrade with the same assembly file so I know that its not the file.
View 2 Replies
View Related
Jun 28, 2013
Lets say we have a plate with 100 randomly placed holes on it and 100 parts to attach to those holes. The parts aren't content center parts so they can't inserted in an easy fashion and the random hole spacing makes component pattern useless. The parts would normally be constrained using the insert command and you'd have to do all 100 separately. Would it be possible to make a script that would let you select the 100 parts then choose the selected geometry on one part and then a hole on the plate. It would apply that insert constraint and automatically select the same geometry on another part so you could simply select another hole. Then rinse and repeat until all the parts have been constrained to holes on the plate.
If something like that is possible it'd cut down the number of clicks greatly and also panning/rotating to select the different parts and holes on the plate. This isn't a daily thing we'd be doing, but it comes up enough in large assemblies it could be very useful. I haven't done any scripting for things inside parts/assemblies so I don't know what's possible while scripting.
View 1 Replies
View Related
Oct 17, 2012
I want to transfer the rotation motion of part 'C' at a pivot point 'D' , to part 'E' which is pivoted at 'F', while the flat surface of the part 'c' is inserted in to hole 'B' of part E. How to give an assembly constrain to hole 'B' with flat surface 'A'
View 2 Replies
View Related
Mar 22, 2013
For some reason it will not let me constrain a part to the center of gravity plains. I would like to constrain lifting lugs to the center of gravity so the model will automatically update itself. Is there anyway to make this work (using ilogic or anything)?
Why would Inventor tease me with showing me the center of gravity plains in an assembly but making them completely useless?
View 3 Replies
View Related
Sep 24, 2012
I just set up an angle constrain with min and max values (explicit vector) and when I grab and move the part inv will crash, it happened 2 times after restart too...
I have inv2013 Pro with the latest SP1 installed - win7 ultimate
View 3 Replies
View Related
Aug 15, 2008
How do you constrain a pin so that it can translate/rotate within the boundaries of a slot?
View 9 Replies
View Related
Jun 30, 2013
I'm currently using Inventor 2013. but I've seen this in earlier versions of Inventor.
After creating a view within a drawing sheet, if you RMB on the view label, an option for Constrain to View Border appears.
What does this option do and how is it used? I don't see anything happening when I use this option.
View 5 Replies
View Related
Jul 15, 2013
I'd like to constrain about 100 parts at the same time to the same plane. They are the same part, copied over and over.
Is there any way to do this quickly? A component pattern is not an option in this situation as the spacing is very irregular.
View 1 Replies
View Related
Nov 14, 2011
I'm a playground designer and we're currently in the process of updating our systems to Inventor. Over the next few years I'm going to be working on many different assemblies all using the same parts and sub assemblies, many of which need to share the same ground plane.
I'm wondering if there is any easy/quick way to make certain parts (not all) automatically constrain/flush to the ground/XZ plane when I place them?
View 2 Replies
View Related
Dec 10, 2012
I'm trying to constrain the green cylinder to move between the red frame. The red cylinder is constrained on the surface of the larger gray cylinder, which moves around the grounded red frame. When the green cylinder goes up hill/down hill the larger gray cylinder is supposed to rotate around its own axis.
When I choose transitional constraint I'm only able to pick one face on the red frame, and not the whole face. I think it's because the face is not planar, but varies in z-led.
Neither am I able to use the Contact Solver, it seems like the friction is too high. The green cylinder doesn't slide that well when using Contact Solver.
View 1 Replies
View Related
Oct 11, 2012
I have created various symbols to be placed into drawings when required, rather than having to re-create the same sketch every time the drawing is produced.
When I place the symbol I am given the option to select where to insert it, based on the insertion point. The problem is... once the symbol is placed there is no way (that I can figure out) to constrain to the view or dimension to it.
View 8 Replies
View Related
Jul 2, 2013
If you edit a section view sketch you can project model edges in the sketch and use them to constrain the section view line. However I cannot seem to project an included workplane to the sketch. For a particular application I really need to use a workplane because the model is actually a dummy that gets replaced by a vb macro. So any projected model edges will loose their reference.
I found out that I could use a sketch in the model to create the section view. In a model sketch it is possible to project work planes, so this looks like a good solution. However I do prefer the flexibility that you have when you use a drawing sketch.
How to use a work plane to constrain a section view, other then the model sketch method explained above.
View 7 Replies
View Related
