AutoCAD Inventor :: ILogic To Create Copy?

Jul 31, 2013

coding iLogic to make a copy of the open model under a diferent name is a pre determined location with the same extension.

View 3 Replies


ADVERTISEMENT

AutoCAD Inventor :: ILogic Design Copy Does Not Make Copy Of Content Center Parts

Jul 5, 2012

I am trying to make an assembly copy as separate project using the iLogic Design Copy feature.

Everything seems fine except I do not have my involved in assemblyContet Centerparts in this copy.

I am also have no any possibility to chose the Content Center folder in the iLogic Design Copy feature as it does not showup there.

[URL]

View 2 Replies View Related

AutoCAD Inventor :: ILogic Design Copy - Error Copying A File / Inventor Crashes

Nov 5, 2013

I'm trying to use iLogic Design Copy to copy an assembly and all its associated parts to another directory. The assembly contains content center parts. Inventor warns me that the destination file of one of the CC parts (and 18 others) will be overwritten. When I go ahead and copy anyway, the copying process stops at that specific CC part. The Design Copy Progress dialog box states there is an error copying that CC part. When I close the Design Copy Progress dialog box, Inventor crashes.

The error copying the CC part: I'm allowed to use content center parts in iLogic Design Copied stuff, right? I searched some related topics and I'm under the impression that Inventor keeps the CC parts in its own directory and shouldn't be trying to overwrite them.

View 3 Replies View Related

AutoCAD Inventor :: VBA And ILogic Design Copy

Nov 10, 2011

I have two questions - one simple and one more complex, in my opinion. As of now I have a user form where one can enter a variety of values, hit a button, and it writes these values to a designated excel sheet. My first question is how would I be able to allow the user to change one value and have the rest of the entered values change based on this one value. For example if someone were to change the ID # of a part then the height and width would change corresponding to that ID number and would be displayed in the user form. I'm new to VBA so my thought process is kind of trash at the moment...

My second question is whether or not it is possible to write a vba program/macro that automatically utilizes iLogic Design Copy and makes copies of an assembly and continues to copy said assembly while adding a constantly increasing suffix ie -01, -02, -03... for a given number of times.

View 2 Replies View Related

AutoCAD Inventor :: Copy And Paste ILogic Colours?

Feb 25, 2012

I'd like to copy the ilogic text & keep it's colour format - what will do this?

View 1 Replies View Related

AutoCAD Inventor :: ILogic Copy To Buffer Code

Sep 26, 2011

I`m not sure if this is possible or not.

Is there any way to write a script which copy`s a variable to the buffer? Similar to CTRL-C?

View 9 Replies View Related

AutoCAD Inventor :: Save Copy And Replace With ILogic

Dec 18, 2013

I have an assembly that I am working on that will be used as a configurator, driven by I-logic. Everything is work fine but there is one part off the assembly that will be custom to each new assembly.  Is there a way to use I logic  to open the ipt file save it as copy with different name and replace the original in the assembly. I know this can be done manual through the productivity tab within the assembly environment, but I am trying to automate the process so the end user will just have to follow prompts that will be given by i-logic.

View 4 Replies View Related

AutoCAD Inventor :: How To Create ILogic Rule To Create Custom IProperties

Sep 30, 2013

I'm trying to figure out how to create an  iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.

View 8 Replies View Related

AutoCAD Inventor :: Copy A Ilogic Assembly Without Suppressed Parts

Feb 13, 2012

I have a iLogic assembly with some parts and sub assembly. I need to do a copy of this " Generator " to apply   the result later in other assemblies. (something like a member of a ipart or i assembly).

Is there any way to do the copy the assembly to a new folder without the suppressed parts and subassemblies (wich are suppressed in the initial main assembly by iLogic rules)?

I tried to use "Pack and go" and "iLogic design copy", but they always bring the suppressed parts and assembly's, to the new folder and which i don't need to apply in the other assemblies.

View 1 Replies View Related

AutoCAD Inventor :: Copy ILogic Rule To Multiple DWG Files

Feb 14, 2012

I have the need filter inside Vault the Inventor Drawings (.dwg/.idw) by its papersize.

In my testing enviroment, I created a iLogic rule inside a .idw with the following

iProperties.Value("Custom", "Formato") = ActiveSheet.Size

I used the Ruler Trigger "After Save Document" to refresh this rule.

In Vault, I've mapped this custom property:

But, how to Copy (and update) this iLogic Rule to the other existing .dwg files in Vault?

I thought the iLogic Design Copy would be able to do so, but it doesn't works in that way.

View 6 Replies View Related

AutoCAD Inventor :: ILogic Copy Of Sketched Symbol From Template To IDW

Dec 8, 2013

I want to have a template IDW containing sketched symbols representing various possible drawing status stamps; when the drawing is ready for publish I want to run a rule which allows selection of one stamp for insertion on the drawing.  how to copy the symbol from the one drawing to the other.  Here is my non working

'Query stamp insertion requirementquestion = MessageBox.Show("Do you want to insert a stamp?", "Stamp Requirement",MessageBoxButtons.YesNo,MessageBoxIcon.Question)If question = vbYes ThenDim strSelectedStamp As String = "Result2"Dim strStampList As New ArrayListstrStampRequired = TruestrStampList.Add("F&C Stamp Round")strStampList.Add("As-Built Stamp.
[code]..

I get a 'The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))' error. 

View 7 Replies View Related

AutoCAD Inventor :: How To Copy And Paste Sketch In Same Plane Through ILogic

May 1, 2013

Here I attached my model view it's just for reference here iam using rectangular pattern and simple ilogic code .Using rectangular pattern we will get all same sizes of boxes but i want to change different different sizes and positions. my idea is without using pattern just draw one rectangular through parameter. Select no. of compartments automatically copy and paste that rectangular in same sketch plane and ask sizes and positions dimensions.

It's possible through ilogic?

In my panel bar options are:

Hight of panel- Hight of panel

width1- Width of panel

Depth1-Depth of panel

com1- no.of Compartments

hIN- No.of Hinges

View 1 Replies View Related

AutoCAD Inventor :: 2012 Save Copy As DWG ILogic Code Error

Jan 9, 2012

Using Inventor 2012 and using ilogic rule or VB codes to auto Save Copy AS DWG?

My old code error out when debugging. The exact error is on this code line:

DWGAddIn.SaveCopyAs(oDocument, oContext, oOptions, oDataMedium)

Autodesk has agreed that this code does not work on Inventor 2012 and that the development is working on it. This code is part of the Snippets built in Inventor iLogic Rule Browser.

View 4 Replies View Related

AutoCAD Inventor :: Copy IPropeties Back And Forth Between Part And Assy With ILogic

Jun 21, 2013

I need a simple iLogic code that lets me copy iProperties of my choosing  from my assy and to a Part, and grab som iProperties from my part and put into Assy iProperties.

the Assy and part are always named the same, and placed in specific folder, so i can easily locate the files.

I have been searching the forum without finding anything i have the skills to adjust to my needs...

It should be like this..: (not written in correct code but you´ll get my point.. )

'Get partnumber from active assy or part, depending what you have active

PartN = iProperties.Value("Project", "Part Number")
'Defining Assy file
Assy = "M:80000" & PartN &".iam"
'Definging Part file
Part = "M:80000" & PartN &".ipt"
[Code] ..........

If only i knew what to write in the above lines it would work

View 4 Replies View Related

AutoCAD Inventor :: ILogic Design Copy - Unable To Change Component Names?

Aug 11, 2011

I'm finally wrapping up work on an iLogic Configurator project and have started to brainstorm the best workflow to get this "Smart Assembly" into the design group's hands. I had been anxiously awaiting the new "iLogic Design Copy" feature in IV2012, but just recently learned that users are unable to effectively rename any components with this command.

Is this really true? If we can add prefixes or suffixes, what's stopping us from changing the entire filename?  We haven't upgraded to 2012 yet, but it seems like this may be a silly and unjustifiable restriction to a command that would otherwise save our designers hours of "file-management" (ie, manually renaming parts in Explorer, component replace in assy's, replace references in idw's, etc) each week.

Long story short, it seems that every workflow I've come across has had some sort of silly limitation that makes it undesireable for my application:
 
My top-level assembly contains all of the rules, and changes parameter values in the referenced skeletal parts. It also swaps standard parts for other standard parts as needed.I need access to rename ALL files (idw's, top-level assembly, subassemblies, and base components) while still maintaining/updating all internal hyperlinks between them.iLogic rules must be carried over to the new copied components (the existing "Copy Assembly" command strips the assembly of all rules). In light of the iLogic Design Copy's apparent shortcomings, any better workflow?

View 9 Replies View Related

AutoCAD Inventor :: Create A Sheet With ILogic?

Nov 23, 2012

What is the code to create (or add) a new sheet in a drawing with iLogic?

View 1 Replies View Related

AutoCAD Inventor :: How To Create A Rule In ILogic

Apr 18, 2012

I want to create a rule that will warn the user when the plate thickness they are using is not standard.  I have already created a multivalue parameter for plate thickness, which lists all standard steel plate thickness's and also allows for custom values.

I was hoping I could create a rule that would prompt a dialogue box warning when the user creates a custom value for plate thickness.

I know this can be done,  but like I said,  Im bloody useless with iLogic and find it hard to come across relevent examples and/or tutorials online.

View 2 Replies View Related

AutoCAD Inventor :: Ilogic To Create View Rep

May 21, 2012

Is there Any code out there that will allow user to select part file then isolate and create view rep of that part with name of view rep the same as part.

The reason is we have lots of reps that isolate various components and this is very time consuming, I have had a look if there is Any customization because this would be a good user tool,also could work very well on assembly.

View 3 Replies View Related

AutoCAD Inventor :: Create And Use Procedure In ILogic?

Dec 23, 2012

How to create and use procedure in iLogic. 

I have try for create simple procedure / function in iLogic but can't work.

function LOD (ByVal a as string) as DrawingView ThisApplication.FileManager.GetLastActiveLevelOfDetailRepresentation(a)end function LOD_Assy = LOD(DirName)

View 2 Replies View Related

AutoCAD Inventor :: ILogic Create Custom IPropertie?

Mar 15, 2011

I would like to create an new custom ipropertie with ilogic. The reason is the contentcenter, thei haven't custom iproperties. How should the code work:

if
propertie "test" is available
write the value in the propertie
else if
propertie test isn't available
create prpertie
write the value in the propertie
end if

How can i check if the propertie is already exists in the file?

How can i create a new custom iPropertie?

The rest of teh code is ready and works fine.

i've faund already some code with VBA but not with "pure" ilogic.

View 4 Replies View Related

AutoCAD Inventor :: Create Multi-value Parameter With ILogic?

May 1, 2012

Is there a way to create a multi-value parameter with ilogic?

Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB

View 9 Replies View Related

AutoCAD Inventor :: Create Sheet In Excel With ILogic

Jan 9, 2014

I am trying to create a new sheet in an existing excel file and can not figure out how to do it.

I am trying to export parts lists from multiple drawings to an exisitng excel spreadsheet and I'd like have each on their own sheet. I can do everything but create a sheet. How to do this in iLogic?

Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB

View 2 Replies View Related

AutoCAD Inventor :: Unable To Create ILogic Form

Aug 31, 2012

I have one particular file which will not allow me to add an iLogic form. When I select "Add Form" it does nothing. This only happens in this one file. I can open other files in the same session and they work fine. I can add iLogic rules to this file but I can't create forms.

View 3 Replies View Related

AutoCAD Inventor :: How To Create External ILogic Rule

Jul 3, 2012

How to create external ilogic rule?

View 3 Replies View Related

AutoCAD Inventor :: ILogic - How To Create Excel File

Jun 27, 2012

How to create a excel file using ilogic? 

View 6 Replies View Related

AutoCAD Inventor :: Create A Temple For ILogic Code?

Feb 2, 2012

I am trying to use a code window plugin on my website, and would like to create a temple for iLogic code.  Is there any way to output  iLogic code in a format that would work?

I cannot modify any of the existing templates because iLogic requires information as to whether to make some text brown or blue, and it would need some form of output to do that.

[URL]

The instruction page is here: [URL]

I have been manually highlighting or using images, but both have their problems. (cut & paste will lead to a pile of errors with the manual highlighting). I can create the css file, but need some form of output beyond cut & paste to work with.

If something is worked out, it will be added to the program and be available to everyone free (this is a Wordpress plugin).

[URL]

Self built computer with;

Quad core processor
16 gigs ram
Raptor Raid main drives
2 x 1TB Caviar Black storage drives local
2 x 1TB Caviar Black storage drives network backup

Main Software;
Product Design Suite Premium
Windows 7 Home Premium
[URL]

View 1 Replies View Related

AutoCAD Inventor :: ILogic Create Assembly Constraints

Dec 30, 2013

Im after programmatically mating 2 components together in an assembly. My stages are as follows:

1)Create New Assembly

2)Add .ipt's

3) One-by-one, mate all the parts together (each part has a plane named "WPStart" and "WPEnd". In each part im after the WPStart being flush mated with the WPEnd of the 2nd part - see image attached. In addition I would like to mate al the XZ planes in each of the parts fluch together and likewize the YZ planes.

3) Mate the parts together

Dim FlushConst As FlushConstraint

FlushConst.AffectedOccurrenceOne = oAssyDoc.ComponentDefinition.Occurrence.Item(1).Workplanes.ItemByName("WPStart") <--------

FlushConst.AffectedOccurrenceTwo = oAssyDoc.ComponentDefinition.Occurrence.Item(2).Workplanes.ItemByName("WPEnd")  <--------

View 2 Replies View Related

AutoCAD Inventor :: ILogic 2013 - Create Yes / No Property Type

Jun 21, 2012

Dim propertyName1 As String = "Mortise"Dim propertyName2 As String = "Cut Length"customPropertySet = ThisDoc.Document.PropertySets.Item("Inventor User Defined Properties")Try prop = customPropertySet.Item(propertyName1) prop = customPropertySet.Item(propertyName2)Catch ' Assume error means not found customPropertySet.Add("", propertyName1) customPropertySet.Add("", propertyName2)End Try'output the custom iproperties and update the fileRuleParametersOutput()InventorVb.DocumentUpdate()'set iProperties 'iProperties.Value("Custom", "Mortise") = ""'update fileiLogicVb.UpdateWhenDone = True
 
This code creates custom iProperties if the iProperty isn't found. I'd like to add another iProperty called "Resaw" with a Yes/No property type. Is there a way of doing this the way I have things started here?

View 3 Replies View Related

AutoCAD Inventor :: How To Create ILogic Rule To Measure Between 2 Planes

Jan 3, 2013

How to create a measurement between two planes using ilogic rules?

I have created the planes on the asssmbly parts but dont know how to directly pick them.

The measurement is going to be used as reference dimension.

View 1 Replies View Related

AutoCAD Inventor :: Create Listbox In ILogic That Allows For Multiple Selections?

Oct 3, 2013

How do I create a listbox in iLogic that allows for multiple selections?

View 3 Replies View Related

AutoCAD Inventor :: ILogic Coding To Create Automated Drawing?

Feb 14, 2012

I'm attempting to create a model that autmotaically derives ready-to-go drawings. I've gotten pretty far in doing so but have a few issues with regards to dimensioning. As I'm sure you're aware, when the model changes, a dimension to that feature, which has been removed, is also deleted and some those dimensions do not return once the model is changed back.

I have looked into using different view representations, but have found that they do not accommodate feature supression.

Is there a way to program in the dimensioning of a view.

Create center points for of the holes and center lines.

And for a feature note such as "Hole and Thread" dimensioning, when the model expands, the leader and text length do not change and proceed into the view. Is there a way to fix or anchor the text to a certain spot on the drawing, and have the leader length expand and change accordingly to that point.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved