How to constrain this flange to the hole in the spherical door. I just can't seem to get the flange to be tangent and I know it can't be as hard as I am making it.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
I want to transfer the rotation motion of part 'C' at a pivot point 'D' , to part 'E' which is pivoted at 'F', while the flat surface of the part 'c' is inserted in to hole 'B' of part E. How to give an assembly constrain to hole 'B' with flat surface 'A'
View 2 Replies View RelatedI've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies View RelatedI would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies View RelatedI have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies View Relatedi use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
While creating holes in a part, a small counter shows (when you click on a point) of how many holes there are.
Programs:
Solidworks (1998-2011)
Autodesk Inventor (R8 - 2013)
Autodesk AutoCad 2D
Autodesk AutoCad 3D
Catia V5
SolidEdge
Anvil (Very old program!)
Pro/E
I am trying to create a part that has a spherical feature. The spherical feature is "sliced" on the front and back to create a flat surface (see Compound Rest Handle Isometric image). Should I use workplanes to slice the sphere? What is an efficient process the slice the sphere. See Compound Rest Handle Front and Compound Rest Handle Back images and compare to the final result in the Compound Rest Handle Isometric image).
View 9 Replies View RelatedWhat I have is a bracket that sits on a pitched roof (ipt attached). The part was set up to reflect the positioning. On the lower side of the pitch, the easiest thing was to scuplt the flanges to the slope. Although the flat pattern results in some edges not being perpendicular to the face (See image). These show on the drawing. I realize you can remove these in the drawing but it would be nice to not worry about it.
What would be a better way of handling this situation?
2010 Suite-SP4 64bit
I am working on a bin type unit, and am having trouble creating a flange, I am creating the bin in the final product stage, then I will separate into manufacturer components. I am having trouble adding this flange around the top 4 edges of the bin. I need the four corners to meet on a miter 45. I will then rip down each seam and have 4 separate panels.
Is this a bad workflow? Is there a better route? I attached the part in Inventor 2013 format,
I created this flange and I need to cut it from the extruded tube, but I'm having some trouble.
View 2 Replies View RelatedI made a sketch for a bracket and used sheetmetal/contour flanges tool to make solid.I had to use 2 contour flanges to get the shape as i could not get it to work with 1 contour flange.Is this not possible due to something wrong with my sketch?
Other question is have i used the Cut tool correctly for the cut out of the brackets?
Inventor 2012
I'm having no problems creating the contour roll, but it won't let me add flanges to the outside edges. I have attached a file that shows the measurements that I want. I need to be able to create a flat pattern. The material thickness is .1046" and 3" deep.
View 1 Replies View RelatedI made this sheet metal part, selected the arc sketch and the perpendicular edge like in the picture, but the contour flange isn't created
View 7 Replies View RelatedI am trying to make a way that suppress the flange features of all the panels that will be insert in the assembly so i can suppress all the features at ones in a assembly and don't have to do that for each panel separately.
I have a assembly with parameters and i have a part with no geometry but have linked the parameters from the assembly. In my panel part i link the parameters to the part with no geometry.
When i use the parameter in the assembly to suppress the flanges that works the way i want it. But when i insert the panel part into that assembly it doesnot work.
I am trying to create a sheetmetal part and flat pattern of a 72" radius section with 3" split flange top and bottom.I have searched the Discussion Group and several other sites with no results.
View 2 Replies View RelatedIs Inventor able to provide information about the bending angle of a lofted pieces ?
I'm trying to loft a piece from square to circle. The bender ask me what is the angle of this pieces.
I have tried to do a lofted flange. It works, but there is an extra bend that I don't understand why it is there. The bends, I would assume, should be symmetrical but they are not. I have attached the part.
View 5 Replies View RelatedI would like to know if there is a way to have the Schedule as an I-Part parameter of a flange. I'm trying to create a custom flange for use in the content center and would like both size and ID to be picked from a drop down when placed into an assembly.
Since it's a flange not a pipe I can't use the standard tube & pipe authoring method.
I'm trying to make this part on Sheet Metal, and I have to offset this flange at 28 degree that meet 0.37". The thickness is 0.12". Currently, the only method that I know how to meet that 0.37" is by playing around (guess and check) with the number in picture 3. Any other methods to create this offset part.
Inventor 2011
Window 7, 64bits
I tried to create a overlap flange in sheet metal, but the result is not what I want as I cannot select the gap edge near the circle portion. I attached the file here.
View 3 Replies View Related1) I have assembly containing pipe and a flange. I want flange size to correspond pipe size. In other words, when parametrically change pipe size, flange size to be updated automatically. ( do i need to have two parts - pipe and flange, or it can be one assembly without need to create parts?)
2) Is it possible to control type of flange (slip-on, weld-neck.. etc) by parameters or need to make different assemblies for different flange type?
3) Then when flange and pipe sizes are updated would like to make overall length of that assembly whole number (since hub length changes with the flange size). how to round that overall length to integer?
I have sketched a fan casing which consists of a series of tangential arcs. The sketch is fully defined but when I try to use "Contour Flange" I get the following error:
Sheet Metal: Contour Flange Creation failed.
19-3-101-26-2.ipt: Errors occurred during update
The attempted operation did not produce a meaningful result. Try with different inputs.
Try decreasing bend radius
Feature Compute failed.
My guess is the end points of the arcs are not defined correctly but I do not know how to fix. I have attached the file.
how I can combine the bend function & flange in an animation. The problem is that I'm unable to use flange when the plate is nearly 98% flat (which I need to remain the radius for favorite parameters - bend function).
View 9 Replies View RelatedI am currently working with an elliptic profile that needs to be unfolded. The part consists of two sketches, with each sketch having two ellipses. The ellipses on each sketch then forms a cross-section where the thickness of it is supposed to be 8 mm (the first ellipse is offsett).
My plan is then to generate a mold for the inner and outer sides of this part by using the "Lofted flange" function and Rip, since I want the flat pattern of it. However, I've found that I can not select my offset ellipse when using Lofted flange, only the original one. I'm thinking that this might be caused due to the offset ellipse not actually being an ellipse but a spline (I read somewhere that there are two ways of offsetting an ellipse. One generates a mathematical ellipse and the other a spline). Creating an new ellipse and then saying that the a and b distance should be 8 mm less than the other ellipse will work, but that will not give me a constant wall thickness of 8 mm along the circumference of the elliptic cross-section.
What's the best way to populate the studs and nuts on a flanged connection in tube/pipe? Can studs be added to the bolted connection content?
2010 Routed SystemsInventor Professional 2014 Build 222
Dell Precision T3500, Intel Xeon W3550 3.07 GHz, 12GB RAM, Win7 SP1
Is this a bug in sheet metal?
I pick an edge to create a Flange feature and the Flange is longer than the edge. (Flange4 in the file)
I am trying to make a punch tool in inventor for sheet metal. I noticed that for the features I could not select faces or flanges I did. I know you can extrude the same shape to get the same result but I wanted to use a face/flange so that I can retain the flat development. What is the best way around this.
To get a sense of what I am trying to make:
-square cut out
-on the bottom edge of the square I made a face that is angled at 45 degrees
It would be closest to a louver tool.