AutoCAD Inventor :: Sketch Hatch And Print Bleeding
Oct 6, 2011
how we can get hatch to not bleed through other solid hatch when we print?
We manually create sketch hatch (not through Section Views) that has a pattern. We then want to place sketched symbols on top of the hatch. Because the hatch is sketched hatch we can't use clipping. We have built into the symbols a solid white fill hatch to simulate the Wipeout in AutoCAD.
Everything looks good in Inventor, but when we print or export to PDF/DWF the patterned hatch bleeds through the solid hatch. The following pictures show how it looks in Inventor.
View 1 Replies
ADVERTISEMENT
Jan 2, 2012
This is a problem I've had on 7 pc's:
All of the pc's are I7's 8gig Windows 7
The problem is, while making a sketch and trying to hatch it, it's locks up the system. Completely using up all of the resources to the point I have to unplug the pc/hot boot it.
This has been happening on both Inventor 2012 and 2011. (doesn't matter which version of Inventor .. Suite/Prof, Ultimate etc)
I'm thinking it has to be a Windows update that is messing it up, as it worked in the past.
Work ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit ~ i7 20gb
Nvidia Quadro FX 1700
Home ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit i7 - 16gb
Nividia GeForce 9800 GT 1GB
240g Kingston HyperX SSD
View 8 Replies
View Related
Feb 4, 2013
Is it possible to fill an area with hatch patterns in a feature sketch (ipt sketch), not in idw sketch?
I want to show a safety screen (wire mesh) in a 3D model, in order to reduce the file size, I do not want to do solid wire mesh in the model, but the sketch only. I was drawing one by one line and make a hatch cross lines in the sketch, it took me lots of time to draw these lines.
View 9 Replies
View Related
Nov 29, 2003
I need to print an initial 2d sketch (without any 3d work done on it).
Printing this in sketch mode seems to output a screen capture, i.e. some lines appear wriggly and not as precise as an ordinary plot of an idw or dwg file.
A sketch w/o any 3d work will not be accepted as an idw file, thus I am not able to use all the formatting (tblocks, fonts, dimstyles, etc.) options available to idw files.
Is there a way of printing a 2d sketch (w/o any 3d work) as an idw file?
View 9 Replies
View Related
Jan 10, 2014
I am trying to create logo's as blocks to insert into title blocks efficiently. I made the outline of the first logo and hatched it as a solid hoping it would print as a flat black but it is showing up as streaky, almost as if I used a different hatch at an extremely small scale. I don't think it is a printer issue because even when printed to .pdf format it still shows up as streaky.
View 1 Replies
View Related
Sep 21, 2011
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies
View Related
Sep 20, 2012
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
View 4 Replies
View Related
Dec 3, 2013
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
View 2 Replies
View Related
Aug 1, 2011
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
View 9 Replies
View Related
Dec 14, 2012
want to change sketch 2013 into the sketch of 2010
View 1 Replies
View Related
May 30, 2013
When I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
View 8 Replies
View Related
Aug 22, 2012
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies
View Related
Mar 4, 2012
what is the difference between a sketch and a planar sketch?
View 2 Replies
View Related
Feb 22, 2013
I have some hatched areas in my template for a map book. It prints fine from the dwg file but when I create a block and put it in the layout and save it as a template. The hatch does not print when I plot the map book.
View 2 Replies
View Related
Aug 16, 2012
I'm having trouble with constaints, I'd like to constrain my sketch to a point in another sketch on a different plane. Is this posible in Inventor? If so how? If Inventor works differently how would you get a points in one sketch to be linked to points another?
View 2 Replies
View Related
Jul 19, 2013
We frequently publish drawings to PDF files. However, we recently noticed that when we publish to the PDF file in monochrome, all hatching publishes in color.
We need the entire PDF in black and white, but I can't figure out what settings I'm missing.
View 2 Replies
View Related
Jul 25, 2011
Recently upgrade to ACad 2012 from 2002 and have a Designjet 500 at my office and am having trougble with a dot hatch in .plt files being sent to my printshop.At my office, I'm using a Designjet.pc3 file for both the 2002 and 2012 dwg files and they plot identically, no problem.
In creating a .plt file using a 750c.pc3 file for both 2002 and 2012 files for my printshop, the plt file for 2002 plots fine but the plt file for 2012 omits the dot hatch. Other hatches on both drawing plot fine. In print preview in both ACads both files show the dot hatch. I'm using ABviewer to check the hatch problem so I don't have to keep bothering my printshop about this. With the 2002 plt file it looks fine but in the 2012 plt file the dot hatch is missing. ABviewer shows results consistant w/ my printshop.
Am using identical pc3 files and identical CTB files. This problem goes across all my drawings....all hatches work between 02 and 12 except the dot hatch. All drawings were qsaved into 2012 from 2002 when I ungraded cads.
I have created a new 750c.pc3 file and the problem is found in that as well.Attached are just small samples of the problem showing 2002 and 2012 examples.I can only believe I am missing a setting somewhere in 2012 or there is a problem between 2012 and the 750c print driver.
View 9 Replies
View Related
Apr 24, 2013
I have a Hatch in my drawing with Pattern as Solid on the top of an image. I made it transparent and it looks really nice in my screen, but as soon as I print either in PDF or hard copy the transparency feature disappear. How is possible to print my Hatch -with Solid as Pattern- with the transparency active either in PDF and hard copy?
View 3 Replies
View Related
Dec 13, 2012
There's a transparency box you can check when you go to print.
View 1 Replies
View Related
Mar 24, 2003
Because of the problems with wipeouts, I have switched to using some solid hatch set to colour 255. The hatch is in paperspace, sitting under titleblock and other Layout text. I am plotting to an HP1050C, using a .ctb file with 255 set with grayscale off.
The plot preview is fine, but the hatch blocks come out black on paper. I thought this was the problem with wipeouts, and that hatch didn't suffer from it.
View 3 Replies
View Related
Mar 3, 2012
I have put several drawings into the Publish> DWG>>> PDF mode.
The PDF comes out missing little bits of border lines around circles and elipses as well as some bleeding of colors.
View 1 Replies
View Related
Jan 30, 2008
I had someone code my psd for me and I need to replace a couple of the images.
They've obviously created a transparent gif.
The logo used to be on a dark blue bg but I've changed the bg to white so now the blue bleeding around the edge stands out.
How do I amend it to a white bg?
View 4 Replies
View Related
Dec 29, 2012
I ve been using Corel for years, but i always have an issue when exporting the file to jpg,png,bmp formats
I always get 1 extra pixel when exporting. E.g. my selected area is 1000 pixels wide, and when i try to export i get 1001.
Read a few info about bleeding settings, but i cant make it work. I currently use X5 and my Page settings show Bleed 0%
View 1 Replies
View Related
Nov 23, 2002
Using one of my fonts I created lettering that has the middle of each character knocked out so that only the outline shows. The trouble is when I create the jpg for the web the color seems to become runny so it looks like its slightly smudged.
View 4 Replies
View Related
Apr 11, 2014
I am using CS6 v8.0 and Apple 10.6.8 to produce a 240 page book with many illustrations bleeding off the page. Where this is along the centre line, part of the image appears on the facing page crop area when the file is exported to pdf, which my printer is not happy with. I have tried turning off all options (including compressions) when exporting, which cures the problem but results in enormous file sizes. At the moment, if I reduce the frame for the photograph to stop 2.9mm from the centre line, the effect doesn't happen: any nearer and it does.
View 2 Replies
View Related
Aug 18, 2013
Can't plot correctly to pdf with transparency hatch. I have several draws with hatch transparency, but when plot do pdf and use dwg to pdf.plot the hatch it´s wrong. See the draws in attachments.
I try to plot to dwf and after plot to pdf use a third part plot pdf like pdf995, arcplot, and others, but the problem its the same.
I use autocad 2012 but the problem it´s the same if I change to 2013 or 2014.
View 3 Replies
View Related
Jun 7, 2012
I'm having the same problem as the person in the below link but the solution they got in post #15 to place a spherical reflection map in the overide reflection slot doesn't make sense for me possibly because I have mental ray not vray. URL....
View 4 Replies
View Related
Nov 29, 2013
I'm in hopes there is a technique whereas I can paint within the black areas to remove the white spec without worrying about going over the edge, as I would with a black paint brush. I tried different brush blending modes (screen,overlay,multiply) didn't do the trick.
View 3 Replies
View Related
Feb 27, 2013
Bit of a strange one, this. In Photoshop CS6, whenever I create a smart object with the intention of resizing it, whenever I shrink it, where one flat colour collides with another, it creates a really ugly "bleed" effect -- kind of the same effect you get when you take a small image and try to make it larger:
I've zoomed in on this particular part to show just how bad it looks. Particularly on the upper part of the forearm, see how it's got a sort of white "halo" before the black outline? It now looks like I drew a slightly darker outline around all the levels of shading, and it looks really bad, almost like a raised/chiselled effect.
Obviously it's not as noticeable when you zoom out, but it's definitely there. I've noticed that the same thing happens when I just resize the whole image using "bicubic automatic", but when I select "bicubic / anything else", the bleed does not occur. It kind of makes the once-incredibly-useful smart object tool kind of pointless now.
This never happened with any other prior version of Photoshop which had smart objects, and I've only just got hold of CS6 a few days ago.
View 2 Replies
View Related
May 2, 2013
I am trying to entmake a hatch entity from a hatch template.
After entget the template hatch entity, i get the followings
Select object: ((-1 . <Entity name: 7ed11b78>) (0 . "HATCH") (330 . <Entity
name: 7efc7c10>) (5 . "737") (100 . "AcDbEntity") (67 . 0) (410 . "Model") (8 .
"SECTION-LABEL") (62 . 255) (100 . "AcDbHatch") (10 0.0 0.0 0.0) (210 0.0 0.0
1.0) (2 . "SOLID") (70 . 1) (71 . 0) (91 . 1) (92 . 1) (93 . 8) (72 . 1) (10
633596.0 5.79713e+006 0.0) (11 633519.0 5.79713e+006 0.0) (72 . 1) (10 633519.0
5.79713e+006 0.0) (11 633519.0 5.79708e+006 0.0) (72 . 1) (10 633519.0
5.79708e+006 0.0) (11 633500.0 5.79708e+006 0.0) (72 . 1) (10 633500.0
[code]....
Now I wrote the following code using the above data as follows
(entmake (list (cons 0 "HATCH") (cons 67 0) (cons 410 "Model") (cons 8 "SECTION-LABEL") (cons 62 255) (cons 10 (list 0.0 0.0 0.0)) (cons 210 (list 0.0 0.0 1.0)) (cons 2 "SOLID") (cons 70 1) (cons 71 0) (cons 91 1) (cons 92 1) (cons 93 8) (cons 72 1) (cons 10 pt1) (cons 11 pt2) (cons 72 1) (cons 10 pt2) (cons 11 pt3) (cons 72 1) (cons 10 pt3) (cons 11 pt4) (cons 72 1) (cons 10 pt4) (cons 11 pt5) (cons 72 1) (cons 10 pt5) (cons 11 pt6) (cons 72 1) (cons 10 pt6) (cons 11 pt7) (cons 72 1) (cons 10 pt7) (cons 11 pt8) (cons 72 1) (cons 10 pt8) (cons 11 pt1) (cons 97 0) (cons 75 0) (cons 76 1) (cons 98 1) (cons 10 (list 0.0 0.0 0.0)) (cons 450 0) (cons 451 0) (cons 460 0.0) (cons 461 0.0) (cons 452 1) (cons 462 1.0) (cons 453 2) (cons 463 0.0) (cons 63 5) (cons 421 255) (cons 463 1.0) (cons 63 7) (cons 470 "LINEAR")))
The point variables pt1, pt2....pt8 are all defined. But when I run the code the hatch is not being created? Why?
View 1 Replies
View Related
Aug 24, 2011
I have a hatch (ANSI31) enclosed by a closed polyline. Whenever I change the hatch from ANSI31 to GRAVEL some of the hatch shows up outside the boundary. The Polyline consists of both arcs and line segments, and the hatching errors are occurring within the radius of the arc segments. Changing it from Associative to Non Associative makes no change.
I am using AutoCAD 2011.
View 9 Replies
View Related
