how could I search for parts with no material and list them in a Treeview and get a Combobox to change the material ?
Treeview:
Path Material
C:TempTest.iam Standard <= Combobox to change material
C:TempTest1.ip Standard
C:TempTest2.ipt Standard
If I need to change the material of all parts in an assembly I find it convenient to do this in the BOM. In the 'parts only' view I add the material column, change the first one and just drag it down like in Excel.
There are however some parts where the material is greyed-out (see attached image) and I cannot change them in to something else. I already traced this to parts which are present in multiple different sub-assemblies. I guess that's also the reason for the blueish/red icon instead of a normal part icon.
If I open one of the sub-assemblies the part is fine and I can change the material.
Inventor 2013
I need som code to assigning a material to a part in VBA.
Dim oApp As Inventor.Application
Set oApp = ThisApplication
Dim oDoc As PartDocument
Set oDoc = oApp.ActiveDocument
Dim oPropsets As PropertySets
Set oPropsets = oDoc.PropertySets
Dim Mat As String
[code]....
but the material is not changed .....
I wish I can open my general assembly BOM and set the proper Materials to my all my parts after migration from 2012 release.
But I cannot change Material for the some custom part in the assembly BOM in the Parts Only tab. Parts refusing to change a Material have special symbol and I guess it means “promoted assembly” – no info regarding these symbols.
I can change any Material in Structured and Model Data tabs but it is extremely inconvenient for the big assembly.
[URL]....
The questions is: Why those promoted assemblies have inaccessible Material in the Parts Only tab?
I have similar subassemblies built in similar way as you can see fro video, but one is treated as promoted assembly and other as promoted part, the question is what possible difference between those is?
I need to change an entire assembly's parts to a different material. How can I do this without editing each part?
View 2 Replies View RelatedWe use different types of sheet metals, from stainless to bronze, and different thicknesses.
Currently, in order to show the correct material on a parts list, I have to duplicate the material Stainless Steel, and rename it to say 20 Gauge Stainless Steel. Then again for 16 Ga, 14Ga, 12 Ga, etc...
I'd like to have the parts list show the common material such as "Stainless Steel", with another column for the sheet metal style such as "20 Gauge."
We also use items such as Plastic Laminate. I'd like to create a generic material for the physical properties of "Plastic Laminate", and then change the material appearance to say "Formica #1234 Walnut". Again, i'd like to be able to put this in (2) columns on the parts list.
How do we change sheet metal parts material, thickness Bend Radii from an assembly in groups.
View 3 Replies View RelatedWhen inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
I can delete every unused material except one in the Material Editor.I am trying to make the custom Material library and somehowI have got the Material I cannot delete. URL....
View 9 Replies View RelatedI am in the samill building buisness. While designing I thought it would be nice to show logs on our equipment. Is there anyway to show bark on drawings to show the texture on the final drawing?
View 1 Replies View RelatedI am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies View RelatedOn the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies View RelatedI have many pictures (about 10'000). Now i need a search (smart search) with pictures where only my mother (is marked)
On all my pictures each person is tagged. For my mother the Person Tag is called "mother"
I created a saved search with the criteria Person include "mother". The problem now is that also pictures are shown with my mother and other persons. But i would like only pictures from my mother without other persons. Something like... "Person is mother and not person "sister" and not person "friends" etc.
I'm using Lightroom 5.2RC. Not sure if this started happening with the 5.2RC version or if it's been an issue for a while.
While in Library mode, when I choose a library search filter preset, say all 5 stars, and then toggle the filter off and on again, the search criteria randomizes to something wildly different than what I was just searching for, for example, adding text and metadata to the search queries when I only had star attributes selected a few seconds before.
I've experimented with turning the filter lock icon on and off and that seems to have no effect. Switching between folders in my catalog and toggling search off and on, results in the same random search criteria being generated.
Lightroom 4.2 – the situation is this, I have a number of pictures of group shots with many people. I tag each person in each photo. I show my photos to these people and they would like a print of photos with them in it. I am an amature photographer currently located in India where most people have no cameras, so I normally oblige if someone wants my of them pictures printed. On one such occasion I took a week long trip with some friends.After showing them the pictures I tagged “Print for Raju”, “Print for Priya”, “Print for Varun”. The problem arises now when I try to search keywords in the “contains all” section, “print for varun” doesn’t do an exact search. Rather if Raju wanted a picture of Varun printed, that picture would have the tag “Varun” and “print for Raju” and which would make the photo included in my search “print for varun” even if varun doesn’t want the picture.
Is there a way to search EXACTLY what I type? If my picture has 15 tags, “contains all” will search all those tags and if it can piece together the three words I am searching for out of all of the tags, it will reveal results inconsistent with my desires.I realize now that I could use collections instead of tags for compiling pictures to print for people.
I'm using the free Vault that doesn't have a batch print option so I've been writing some code that does the trick.
The code lists open drawings, assemblies and parts, and depending onwhich is selected, displays a list of all the drawings associated with the file and it's sub-components.
Everything is good except that when the list of drawings is populated I am only able to search through the working folder for drawings. This means that if the drawing has been modified by another, or the drawing has not been opened on the local computer, it will not print (or print the old version).
Is there a way to pull the latest files from vault into the working folder automatically? Currently the only way this is possible is by selecting "Get/Checkout" in vault and downloading the files.
I am having an issue with my assembly grabbing an out of date part. I was wondering what the sequence for the search path Inventor goes thru. I assume it first searches the folder you are in but does it go down, up after that? If there is a part below which way does it go? Is there a possibility it could be grabbing the wrong part if it is not in the same folder?
View 5 Replies View RelatedI am brand new to Inventor and I am being given the seemingly simple task of finding the tooling files that needs to be checked for correction on account of parts manufactured out of tolerance. The plotted drawings I'm given has text on in that can find the files, but the drawings are huge. Is there a way to find text like I've been doing when given the similar task in Autocad? I see no edit menu in Inventor.
View 9 Replies View RelatedSearch for features by name from browser. I have seen a pair of binoculars on the top of the feature tree, can't figure out a easy use of it.
C1
Inventor Professional 2013
Vault Collaboration 2013
How could I center the suppressed constraint? I woul like to selecet it in the listbox.
Private Sub CommandButton1_Click()
Dim oAssDoc As AssemblyDocument
Set oAssDoc = ThisApplication.ActiveDocument
Dim oConstraint As AssemblyConstraint
For Each oConstraint In oAssDoc.ComponentDefinition.Constraints
If oConstraint.HealthStatus = kSuppressedHealth Then
Call ListBox1.AddItem(oConstraint.Name)
End If
Next oConstraint
End Sub
Can you sign into AU.autodesk.com today? I just tried and it returned a Search box rather than prompting for my password. URl...
View 9 Replies View RelatedIs there a chance could shoe me how to use iLogic to create copy of part by first searching through an excel worksheet columns, if the name exist in excel worksheet then donot save else create a copy of the part or save as whatever name is defined in the iLogic code.
Core i7-2630K
12GB dual channel Corsair XMS3
Nvidia quadro 2000
128 vortex 2 SSD
WD 7200rpm Black
Asus P8P67 DELUXE
Product Design Suite 2012 Ultimate
Is there a way to Search and replace text in drawings?
Some text is in leaders, others in dimensions...