I am using inventor 2013, and I have some model and like the word say they are model that i will use as derive parts to machined or change depending on the model. then I make the IDW drawing from the derived part.
Most os this models are assemblies. what i want is to pass the model number to my IDW drawing of the derived, so i can see from which model the part is derived.
When we send 3D models to customers, we always derive the assembly to make it 1 solid part, so the customer cannot disassemble it to copy our product, and then save it as a step file.
I want to Derive an assembly to a part and then save it as a *.step file with an ilogic rule.
I worked out the last part, but i cannot find the Derive assembly code anywhere.
Im not an experienced programmer, i can only Copy paste, so if the solution is already posted in a simular rule, i will not be able to pick what i need from the code
Is it possible extract the quantity property from an assembly and use that to populate a title block item in a part drawing file?
I want to be able to print the quantity required for the assembly right on the part drawing that is released to the shop.
I have often right clicked a part in the browser of an assembly and edited its properties. This may include stock number, material and adaptability.
Drawings of these assemblies seem to update accordingly. At least initially.
I have noticed often several sessions later, the same properties have defaulted to their original value.
And I came across the statement in the corrections attachment.
What does the highlighted sentence mean, exactly? And which properties respond to a change at the part level when edited in an assembly?
Using Inventor 2012 Windows 7 Dell Precision dual EH(quad core) @ 2.13 GHz 4 G Ram
I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
I am trying to derive a part in an assembly from an existing part so that when the first part's geometry is altered the second part will update accordingly. I have tried to use the derive tool but I only need the bottom geometry of the part to derive a base plate part from and I see no way to select just that face when using the derive tool.
View 3 Replies View RelatedWe have found that after installing SP1 for Inventor 2013 is nearly impossible edit derived assembly. It takes very long time for open dialog of Derived assembly, without SP1 it takes approx. 2mins. for assembly of 20000 instances, with SP1 it takes more than 2 hours! This we are able to reproduce on each of our station. And more, there is still not corrected bug with save setting of hole patching range. This setting does not remember min and max value and after re open this dialog the range is set back to default value 10-9999mm.
I have tried ti disable antivir and all unnecessary services - no effect.
Inventor 2013SP1, Win7SP1 64bit, Eset Endpoint Antivirus 5.0.2126
There is an assembly in Vault that I need to derive into a single part to work with our CMM software.
When I try to open up the assembly from Vault, it opens up just fine, with no warning or errors or save prompts, so all part data links should be ok. However, when I try to derive it there is a part that will not come in. If I derive the assembly and keep each solid as a solid body, it derives just fine but that is not what I need.
Is there any way to troubleshoot why a file isn't coming in for the derive but works just fine with Vault? I can't attach the assembly but I will try to attach the process I have recorded and have a screen clip of the error message. Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
I need to derive a part in a model (not assembly and as a separate solid), to remove it and make a cavity. However, I need inventor to prompt what file is to be derived through iLogic.
View 5 Replies View RelatedI want to create a rule with CommandManager.pick who see the name of assembly and send a custom ipropertie to all parts of this assembly view in drawing, this is my none finish rule.
Dim doc = ThisApplication.ActiveDocument
Dim entity = ThisApplication.CommandManager.Pick(
SelectionFilterEnum.kDrawingViewFilter,
"SÉLECTIONNE UNE VUE")
modelName = IO.Path.GetFileName(ActiveSheet.View(entity.Name).ModelDocument.FullFileName)
PART = Left(modelName, 11)
EXT = Right(modelName, 3)
FIRST = Left(modelName, 3)
[code]....
I have the rule "SEND TO PARTS" in my assembly but i have this error message
MEMBER NOT FOUND. (Exception from HRESULT: 0x80020003 (DISP_E_MEMBERNOTFOUND))
I'm having trouble showing a reference part in an assembly drawing. When said part is set to "reference" it is no longer visible on the drawing.
View 9 Replies View RelatedI want to know if there is any api to check if a particular drawing is a assembly drawing or part drawing.
View 4 Replies View RelatedI wonder if it's possible to see with ilogic if a part exciste in all others view (in assembly) of the same sheet?
View 9 Replies View RelatedHow can I get to the option of checking or unchecking the "use colors from source component" in a derived part? I have been looking through the API at the DerivePartComponentObject and see all the other options but the one I am looking for, where to start looking for this?
View 7 Replies View RelatedI often use a number of parts with only one sketch in them as templates for other parts.
I have for instance a template part with a top view sketch and a template part with a side view sketch.
Mostly I can use one of these template parts to derive my parts.
But now I want to creat a part that needs both the top view and side view sketches. So I need to derive from two different parts.
derive multiple solids from a part. I use the code shown below but it seem as I only can get the first solid in the part that I am trying to derive from.
''More Code'''
' Create a new part document, invisibly.
oPartDoc = m_inventorApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject, , True)
oPartDoc.UnitsOfMeasure.LengthUnits =UnitsTypeEnum.kMillimeterLengthUnits
' Derive the assembly into the part.
Dim oDerivedPrtDef AsDerivedPartDefinition
oDerivedPrtDef = oPartDoc.ComponentDefinition.ReferenceComponents.DerivedPartComponents.CreateDefinition(oTopDoc.FullDocumentName)
Call oPartDoc.ComponentDefinition.ReferenceComponents.DerivedPartComponents.Add(oDerivedPrtDef)
'''More Code'''
How can I get all the solids from the part that I am deriving from?
I have an assembly were i want to exclude some parts in a sectional drawing view. I mean i want those parts should be visible in section view but should not get sectioned. And the remaining parts will be in a sectioned view. Is that posible or i may be missing something.
View 8 Replies View RelatedI'm trying to extract the Rev of a model (part or assembly) from a drawing. Since Inventor has independent revs for the model and idw I am trying to drill down and put the rev from the model referenced. I got it to work for ipts and many iams using:
Dim oModelDoc As Document
Set oModelDoc = oDocument.Sheets(1).DrawingViews(1).ReferencedDocumentDescriptor.ReferencedDocument
The problem I have is when the drawing only references an ipn presentation file. The ipn ALSO has it's own independant rev! I'm trying access the model the ipn references but cannot get it to work.
BTW, I do know about the ability to sync idw and ipt properties. I have enable it for our template but we have a lot of legacy drawings that don't have this option selected. I also haven't tested that method with an drawing that only references an ipn.
Code is below with offending section in bold:
' Find model (part or assembly) referenced by drawing if active document is a drawing
If oDocument.DocumentType = kDrawingDocumentObject Then
Dim oModelDoc As Document
Set oModelDoc = oDocument.Sheets(1).DrawingViews(1).ReferencedDocumentDescriptor.ReferencedDocument
[Code]....
I wanted to know if there is a way to restore the link between a part/assembly and a drawing so that the drawing will open when "Open Drawing" is selected from right clicking the part/assembly from the Model browser in Inventor.
View 1 Replies View RelatedHow to derive only referenced imates to the solid from multi body part.
View 6 Replies View RelatedI created a skeleton and now i want to derive the sketches and planes to other parts. It worked for a while, but now it does not work!
The problem is when I create a new .ipt and then I would like to Derive an other part in it. I click on the file from the browser, it puts the part into the .ipt, well, sort of, it's like a visual effect, but NO Derive window appears afterwards, so I cannot edit which sketch or parameter or planes...etc.. I chose to actually derive to the .ipt.
I have a Part List in the assembly drawing.
This list has Renumber Items activated.
All renumbered items become in blue cells in Part List properties table.
All added or altered after that Part Properties are not shown in this Part List.
For instance if I would add or change some Description, Comments or other properties to some parts which are in “blue” cells those will be not updated in neither auto nor any manual way.
So far I should delete and create the table again to see new added properties.
The question is: Is there are any other more simple ways to update the Part List table without recreating it from scratch?
I am trying to take a 3" sq 11 gauge tube that will have a pie shaped cut out of the tube leaving only one wall remaining. The tube then will be bent until the two sections are mated and welded. The tube is going to be processed on a tube laser to have the features cut out.
The problem is when I bend the tube in inventor I need a straight version of the tube for cad/cam programming and fabrication and not have it affect the bend feature that is placed in the weldment. I do no want to derive a part and save a separate version in the vault. I would like it all to be in one model.
I try to create a view representation and name it "straight" and suppress the bend feature in the new representation but it changes in both representations of the part.
Is there a way to have two different view representations of the part (suppressed bend feature, unsuppressed bend feature) that I can switch between?
I have a multi body part with an extruded cut through all solids. Each solid is derived out to its own part. I edited the extrude feature in the multi body part and removed one solid from the selection set. The cut was correctly deleted from the solid, but when I open the part its still there. The only way to make it update correctly is to manually edit the derive feature in the part. Caught it just before it went off for cutting. 2012 SP2, all hotfixes, win7 64 bit.
View 5 Replies View RelatedI do a lot of work where I start with a full assembly drawing, then make more drawings for the individual parts. Is there a way to link the title block parameters in the part drawings to the title block in the full assembly drawing? The only way I found was to link the parts together and then grab the info for the drawings off of the parts, but if I'm implementing this in a template used by others I want them to still be able to just fill in the blank on the assembly drawing to make it work.
I was able to get iProperties to show parameter buttons, but I haven't seen any way to link to other files or anything like that.
I have a surface model of a bin that I am going to use as a master for deriving sheet metal parts for each side of the bin. After creating Sketch 9, which defines the mating flanges of the sheets, I repeatedly get the error noted in the subject when I try creating a derived part from this file.
I narrowed the problem down to the sketch block I used to define the square holes or more specifically a dimension that appears in this sketch block. I originally drew the circle with the square around it within Sketch 9 and then used the Create Block command. Then I patterned the block along the edges and made the pattern symmetric about the mid point of the edge and placed the hole half way out on the flange. (Flange width is set as a user parameter "FlangeWidth"(1.5") and distance to hole is "FlangeWidth/2" or even just a raw value of 0.75").
Now once this dimension is added to the sketch it will also appear in the block editor for the 5-16 Carriage Square block. If this is deleted from the sketch and the block definition and the pattern of holes are left unconstrained in this one direction a derived part can be successfully made. BUT if a dimension is added to the sketch it will trickle down to the block definition and now a derived part will fail...
I realized that my holes are to be on the midline of the flange so I can constrain them there without a dimension and so I can work around this. I just didn't think dimensions to geometry not included in a block were added to the block definition.
Inventor 2013 x64 sp1.1
Workstation Specs:
Dell T7500 Dual Xeon E5620 @2.40Ghz 8GB Ram
NVIDIA Quadro FX580 4GB, Windows 7 x64 sp1
I'm using Autodesk Inventor 2012 SP1 64 Bit on a Windows 7 machine without vault.
I seem to be missing something. I cannot get the parts list in assembly drawing to fill the part number column. See the image below.
The BOM has the part number field filled out as shown below. Is there someway that I need to map the iProperty to the part number column in parts list?
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedI`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
New user 2014
Part created in assembly does not update to part file.