AutoCAD Inventor :: Lost Visibility Of Components In Assemblies
Jan 10, 2013
Opening large assemblies containing LODs some components missing. The assemblies are build with inventor 2010 and now is totally migrated in in 2013 SP1.1 Update1. If you open the sub assemblies these are correctly on. I've tried to set visibility on, off, change representation of view, positional and activate various LOD, including Principal LOD.
If you position another instance of the sub assemblies, one is on but the other isn't visible. In the drawing all is correctly represented
See the attached .PDF
This occurs in Factory and Product design suite. Graphics card and relative drivers are certificated. I can't attach a P&G because is a very large file (250Mb).
I use hinges in my door assemblies and they are basically placed into the assembly each time and become flexible so the doors can operate. The hinges are one size and don't change in any way or shape. What is the best practice for inserting these hinges into my door assemblies?
Inventor 2013 Windows 7 Professional 64-bit SP1 HP EliteBook 8470w Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz Memory: 16 GB AMD FirePro M2000 3D Connexion SpacePilot
In Inventor you can use "virtual components" in assemblies for things like paint, oil etc. In Vault, these virtual components will get an item number. Is it possible to re-use a virtual component in another assembly?
Like the same paint for 2 different models (maybe just differing in amount). Right now I would have to create a lot of items for the same thing.
How do I make referenced components from parts and assemblies? (I searched the web and it said that that you can change it in the iProperties by selecting the Reference tick box under the occurance tab - but no such thing exists in Inventor 2011!
Suppose you have a project consisting of various assemblies and individual components. You are now building a new component that ties into many of these. For example, let's say you have put together the guts of a gear box and you now want to carefully construct a housing that encloses the internal components. How do you do that?
The problem I see is that once I click "Create", select a reference plane and then create a new 2D sketch, I can vaguely see phantom views of other components, but I certainly cannot snap to points on those objects, or measure from them, or really do anything with them. I can also detect no particular relationship between the origin point offered in the Sketch environment to the origin of anything else. I am of course coming from the Autocad mentality, where everything can be readily snapped to.
What is the key concept I am missing? I have read a little about top down design, but nothing I have read has really shed light on this fundamental question.
How to manage the visibility of components in a particular view?
In attach file,View 2 is a detail view of view 1. On view 2, I want to display only the nozzle (Drain (H):1) and shell (C1306388341:1) component. So I need to set the visibility of the other component to false.When I try to code this, the components of model file of view 1 was updated not the view.
Set ViewDocument = oDetailView.ReferencedDocumentDescriptor.ReferencedDocument For Each ViewOccurence In ViewDocument.ComponentDefinition.Occurrences If nozzleName <> ViewOccurence.ReferencedDocumentDescriptor.DisplayName Then ViewOccurence.Visible = False End If Next
The reference document I set for my code is not the document which contains the view 2. So I need to the actual reference document where view 2 belongs which is in the box of view 2 that contains 5 components.
I am having an issue with the visibility of components underneath other, transparent components. The part which needs to be visible is a switch underneath a vacuum formed polycarbonate cover. When the cover is positioned open such that the switch would be partly visible even if the cover is opaque, the switch is rendered. When the cover is positioned closed, the switch is no longer rendered. I have attached JPG's of the two states.
Since changing to Inventor I seem to be unable to turn off visibility of parts in assemblies on a drawing. Usually I just expand the view in the browser then right click on parts and turn off visibility. When I try this the visibility option is grey.
I am working in an Inventor Assembly .iam, I have about 250 fasteners (screws) that are constrained to a flat washer and lock washer. I would like to put them in as a single unit (sub assembly if you will) and then promote or explode them in the top level so that my bom has 250 screws, 250 washers, and 250 lock washers all at the same level, not associated to one another except thru the constraints that were entered in the original assembly. I have tried Promote but that doesn't work because it removes the washers from the original file and I end up with only 1 instance of the assembly. Am I approaching this incorrectly? Is there a better way? I run across this scenario with different components quite often.
i have a valve vault assembly that i am creating that has two headers running through a large cylinder vault. how i get a total BOM if i were to create the header assembly file separate from the the total vault assembly file. is there a way to explode the header assembly bom when i do the drawing.
I'm trying to use assemblies when creating a corridor. The Tool Pallette is emply but I can drag the assembiles in from the Catalog. I've also created an assembly using the ASC. Neither work when I try to use them. The error message is attached.
I'm using a network installation and I do not have the option of changing it to a DVD installation.
I would like to find out how to fix two components in an assembly relative to each other, and using VBA.
What I want to do is to build the assembly (which consists of two components A and B, and also other components) and then animate the joint in component B. In order to do so, I have to fix A to B so that A moves along with the joint motion. But my problem here is that the attachment of A to B is not definite - it depends on other components in the assembly, so I cannot predefine a constrain between the two.
Is there a way I can easily fix two components relative to each other in an assembly without prior knowledge on how they are positioned relative to each other?
I'm thinking of measuring and then constraining the origins of the two part files in 6DOF, but I'm not sure how i can extract the angle between the axes and then constrain them in the correct way (mating using angles has always been confusing for me).
we are using level of details to suppress few components. when we are trying to take BOM for that level of details. we are getting the suppressed components also. is there any control we can do avoiding that suppressed component. I know if you make the BOM sequesnce to reference that wont come in BOM. but we need that file for other LOD.
I have 2 tanks, each one is an assembly in itself, and they have to be positioned on a steel skid, also an assembly and then interconnecting pipework between the two. My prioblem is that I can't seem to find a way to position the two tanks at a set distance from each other and in relation to the edges of the skid.
Because of this, my pipe router is going all over the place in trying to join up the two termination points.
In SW I was able to create assemblies that had components with limited motion and then set them as "Fllexable" and allow them to move in larger assemblies. How do I do this in Inventor? I have a trailer with both the front and rear axles able to pivot. These axle sub-assemblies are both able to pivot as top level assemblies but when they are assembled in the trailer assembly the only way I have found to allow movement is to make one axle active and move it then activate the other nad move it. This doesn't work well if there are several interdependant subassemblies that should move together. I am in Inventor 2012.
Inventor Premium 2013 SP1.1 Vault 2013- plain vanilla version HP G71 notebook celeron cpu w 4gb RAM and 64 bit system Win 7 home premium
I have converted a lot of STEP files to .iam files. What is the easiest way to put them in a library? there is realy no need to publish them is them, i already have them in subfolders etc.
We have some structure issues going on. Below is an example of our current structure.
1. Overall Frame Assy
2. Frame Weldment
3. Spine Weldment
3. Bracket Assy
4. Deck Brackets
4. Air Brackets
4. Hyd Brackets
The biggest problem is we have all of these level 3 and 4 subassemblies that need to reference upper level assemblies to show placement on the drawings. We have tried utilizing LOD's and view reps but still can't fix the problem. The problem comes into play when we get to upper level assemblies that become so huge because of all of the references that are happening at lower levels. It is structured this way to create small BOM's and to be able to use in multiple different structures without having to pull a new Part Number.
We need the reference geometry to be able to show on the drawing our locations of all of these lower level assemblies and how they mount to the frame in their respected locations.
I'm trying to change the BOM structure of some sub-assemblies from "Normal" to "Phantom". However, some are displayed as disabled and therefore do not allow any changes/overrides. How can I enable these in the BOM?
Inventor RS 2011 AutoCAD Mechanical 2011 ASD 2013 Vault Collaboration 2011 Windows 7 Pro
I've created a simple iPart and want to insert multiple instances of it into an assembly. The plan is to use a parameter-driven iPart to create multiple variations on the same basic model which will eventually be lasercut.
I've included a sample archive. 2DiPart is a simple part with a couple parameters. 2Dassembly is where I've tried to include this part. I'm able to walk through all the dialogs to place the iPart, and will even see it in the canvas as I select the insertion point. However, after I dismiss the dialog, nothing shows up in the canvas. I'm still able to see the component instances in the project explorer however.
How to best to get multiple instances of a parametric iPart into a drawing that can be lasercut.
I made a simple aluminum frame with clear polycarbonate shields. Somehow, when I put it on drawing sheet, some parts behind the polycarbonate are missing. If i make the polycarbonate invisible, the missing parts appear again. This strange phenomenon started today. It didn't happen before, and no parts were missing behind the clear polycarbonate.
In ipn file, after I created sequence and wanted to add in some more components. When I edit the sequence, I cannot find the place to add the components.
I would like to know if there is any possibility to replace a component with another one, that has a different internal name. Losing the dependencies would be acceptable.
ReplaceReference and PutLogicalFileNameUsingFull always return the error "wrong parameter".
I'm attempting to run an FEA of a preliminary design to isolate the best locations for weight reduction. When I attempt to do the analysis with convergence criteria of
Maximum number of h refinements: 2Stop criteria: 8%h Refinement Threshold: 0.5
I get the following issue:
Mesh failed: Face failure: Spar:1Model separates into 36 independent componentsSoft spring was added Is there anything I can do either model or simulation wise that will keep the model from separating?
Why can I not constrain placed objects with three constraints? Anything I place constrains with one constraint then is virtually fixed (without being) and cannot even be moved to allow for further constraining.
Look at the vifdeo file attached. I have not problem to create one component fade out (from 100% to 0%). But how to show the another component fade in (from 0% to 100%)? Studio does not allow fade from 0% to 100%.
I was using "copy components" inside an .iam without any problem. Suddently, when I tried to copy more instances, inventor was blocked and I was not able to copy anymore components. Then I had to close inventor because it seems to be in a bucle.
I have a VBA macro that places selected virtual components into an assembly. I can place virtual components with different part numbers into the assembly with no problem. When I try to place the second instance of a virtual component with the same part number I get an error.
For example: If I place a virtual component with the part number C123A456 into an assembly it shows in the tree as C123A456:1 If I try to place C123A456 again it errors at this line.
'Add selected line as a virtual part Set oOcc = oOccs.AddVirtual(sPartNumber, oMatrix)
I can place multiple virtual parts if I append -1, -2, -3 etc to the part number but I would like to let Inventor use the :1, :2, :3 to keep track.
I am trying to understand how fixed constraint works using Vector Components. It shows inches input, not ft/lbs. What I am seeing is if I put down 1 in in the Y insert and it shows the X and Z are unconstrained. What I am trying to is put on a fixed constraint to one direction which is Y. When I use 1 in for Y, it looks like it is using force of some kind. How this Vector Components work?
