All the times, when i try to insert any DWG file in Inventor 2014 nothing appears in the wizard (see attached).
I tried to install the new Update for the Inventor 2014, but nothing changes.
I attached one DWG to you test it too.
When I try to open the Drawing Resource Transfer wizard, sometimes it does not open,instead I get the message
how to prevent this from happening?
I've been using the drawing resource transfer wizard for years now, and all of a sudden it is very slow.
Usually it goes through the process of updating a drw in seconds, but now it takes second per item it copies to a drw.
Is there something that could be causing this?
Is there a logical work flow to apply a new or updated drawing title block to a large number of IDW's that are in a vaulted project?
The Drawing transfer wizard looks to be a good tool, I just can't see how to handle getting all the IDW's checked out of the vault, updated and back into the vault in an automated way.
I recently had an issue with the Drawing Resource Transfer Wizard. I went to go update a drawing and my custom title block was no longer an option to choose. I believe I used it Monday and it worked fine. I am using Inventor 2013.
View 4 Replies View RelatedI'd like to be able to queue up a set of processes using Inventor's task scheduler. Ideally I'd be able to queue it, leave, and have it done in the morning.
The process is this:
1. Check Inventor dwg files out from vault
2. migrate files to 2013
3. Run drawing resource transfer wizard
4. Check files back in
5. Export all files to AutoCAD dwg format
How can I queue step 3 to run through task scheduler? DRTW is not an option in the task scheduler. I'll be giving it the same settings to use every time.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
The Add-A-Plotter Wizard has become corrupted, and will not run on any computer in the office. We get a message about missing DLLs. I think I used to know how to add plotters "by hand", before the Add-A-Plotter Wizard existed. Can I still do this, and if so, how?
View 1 Replies View RelatedWhen I try to add a plotter, I get a message, "No DRC files were found in Autocad 2013 - English drivers directory."
The DRC files are in the DRVen-US directory, and is in my drivers search path. I have even changed the order of the search path to place that directory first, but no joy.
I would like to know how it would be possible to manipulate the Intersection Wizard so that I can obtain the required shape as drawn by the architect. In essence create a "round about" shape. see the attached image for furhter detail.
View 4 Replies View RelatedI'm having some trouble with .fbk files disappearing after I import them. I'm sure I am missing a setting somewhere but I don't know where. I have a (slightly clunky) workaround on setting things up correctly.
We went straight from LDD 08 to Civil 3d 13 so it is a bit of a learning curve.
I am trying to use Civil 3d 2013 with Trimble Link. My procedure is to download the file with trimble link and then follow the wizard from there. My .fbk imports fine, but if I need to edit anything I find that it is missing from the folder that I just imported it from.
If I copy and rename the .fbk prior to importing it I can import and edit the re-named file no problem, it just seems to be the initial import done by the wizard that deletes the file.
I think it is not possible but .... Is there any way to reuse the wizard I have customized to create the intersection ?
Civil 3D (2013)
When I start the layoutwizard and proceed to the insert title block the only choice I have is none. I have several title blocks created and cannot remember where to tell Cad to look. I just setup a new PC and installed AutoCad 2011.
View 9 Replies View RelatedCan the Data Extraction Wizard be added to 2013LT?
View 2 Replies View RelatedI am currently trying to design a roadway with a reverse curve in it. I am having trouble getting my corridor to model my assembly correctly as it is showing the roadway as the generic assembly and is not adding the superelevation that is shown on my alignment. I have done the following:
1) created an alignment with superelevation wizard - superelevation diagram shows up correctly
2) Created a profile for this alignment
2) created an assembly (Road layer is LaneSuperelevationAOR) in which the right lane is set to use SE on the right outside lane and the left lane is set to use SE on the left outside lane
3) Created a corridor with the assembly and set the width targets to the offset alignments (I.e. the lines that are the edge of pavement)
The corridor does not show the superelevation values based off of the alignments superelevation that it has calculated. I did get the supers to show when i tied the Future EOP to the existing surface, however i do not want it to tie in, I want it to just show the values that were calculated.
Is there a way to get this to show without referencing an additional profile? Also, on my first curve i want to keep the right side at a -2% slope and raise the left side to 2% slope (RC). Is there a way to limit the calcuations to only use a reverse curve?
OK, since installing autocad 2012, and installing the office profile, which directs to a folder on our server to our plot style folder. Fairly typical medium office setup where settings come from an AutoCAD Settings folder, from support, fonts CUI etc etc.
There is the plot style wizard shortcut in this folder. In past releases this has been ignored, however now every time you open a new drawing we receive the error prompt, "The following shortcuts in the search were invalid and ignored" and then indicates the file path location. What's the deal?!
Now while i shouldn't have to, yes i have simply attempted to delete the shortcut in question but it showed up again.
I think that some of the settings does not remain for the next use of create sections views wizard.
In example, placing the tables forgets the last parameters I set , so .....
Any trick to have this customized?
Civil 3D (2013) how much you have to improve....
I ran into a problem with the structural member wizard today. I was making up a bunch of glulams and everything was doing just fine, then all of a sudden the wizard stopped accepting new values for the member depth. No matter what you try to enter, it is rejected and a value of 1'-0" is placed in the field. It will accept new values for both width and lamination depth however. I tried to make a member of another material (steel) just in case it was just the glulams. No luck, they behave the same way, you can't set the beam depth. I also tried restarting ACA, working in a completely new (and clean) file, as well as restarting my computer, it didn't work.
I really don't want to have to go through the repair/reinstall circus if I don't have to.
wizard installation error on visual studio 2010
View 1 Replies View RelatedHave a big subdivision job I want to divide up for maximum collaboration. So I though put each alignment in a separate dwg and dref into another with the corridor model. One big problem the intersection wizard will not lock PV onto the drefed alignments and profiles as they are read only.
Question : How does one work around this?
Any opinions or tips on using the Intersection Wizard to create an intersection and then editing it to incorporate a spandrel or am I better of not even using the wizard and creating the spandrel from feature lines/alignments?
View 9 Replies View RelatedI am using LT 2000i on windows 7, when i use the add a plotter wizard and select a system printer it crashes,
View 9 Replies View RelatedI've just started working with Autocad 2012 and am using the Data Extraction Wizard to extract information into excel. Some of my drawings have upwards of 150+ layers and I don't necessarily need the information from every layer. Is there a way to have the data extraction wizard ignore layers of my choosing?
View 4 Replies View RelatedI write a program, this program needs to insert some standard illustrations. I made these standard illustrations into different blocks. And I store these blocks in a dwg file. Everytime I need to insert some illustrations, I just click the mouse on the current drawing, I want the illustration inserted. These means the following points:
(1) Import the blocks to the current drawing, if the blocks have already been imported, then do nothing.
(2) Specify the insert point by clicking the mouse, and I want the block's insert point to coincide with the mouse clicking point.
I am trying to insert OS Tiles into a drawing using the insert x-ref command. I have managed to insert 192 tiles but still need to add 29 more tiles to complete. When I try to insert another x reference AutoCAD just goes into a continual loop. Have to force AutoCAD to crash after ten minutes.
I am using AutoCAD 2014 MAP and have just had a new system built (i5 processor, 8GB RAM).
I am currently looking into the API for Inventor 2012 in order to try and automate a few processes that we do within our comapany.
What I am trying to do is access the functionality that the "Insert Frame" or Frame Generator function brings to Inventor by using the API. The basic functionality that I am looking for is to be able to draw a steel beam from Inventors library by using the API, similar to the way the "Insert Frame" command handles it. Is this possible? I have looked into the API documentation but cannot find anything.
My Inventor professional 2014 doesn't insert any DWG in the Sketch mode.
View 4 Replies View RelatedI have a part (ipt) and I want to attach a pdf to this file. From the manage tab, Insert panel, I pick Insert Object and then browse to the pdf file. Pick the file and then OK.
Instead of it placing the pdf in my browser, I get an error "Could not Insert Object".
I want to add our company logos to a few drawings. I added a small thumbnail to the title block a while ago. In the sketch tab, Insert, Image, I can drop in bmp's. However, when I'm trying to ad it directly to the sheet nest to a text box or part view, I don't know how to. If I create a new sketch, the Image icon in the sketch tab is grayed out.
How do I insert an image in my idw?
For some reason I cannot insert a file into an idw. It tells me "cannot modify the library file" "edits not allowed". I even opened an existing and tried to add it in the same idw with the same message.
View 3 Replies View RelatedI want to insert a row which contains data into iPart as new part member but without using excel.
View 3 Replies View RelatedIs it possible to have an idw file of a part as the master idw and insert that idw into a new idw or a few different idw files and the secondary idw files that were inserted update when the master idw file is edted or updated?
I am using the same ipt in multiple assemblies and i would only like to update one idw file. I do need to have as many as eight different idw files related to the single part and i would like to only update the master idw file.