How to remove a portion from this part. I need the beige colored "lump" removed and it needs to be smooth with the other suffaces.
I can copy the surfaces and then do a patch, but the new surface does not look right. It has a buldge in it.
Also tried "Delete face" which I use all the time, but it does not work here.
I am a beginner when a extrude a feature and select a part surface for new sketch now i want is to offset that surface but i can,t there is + sign with mouse icon and something like fully constrained is written in down the window.
View 9 Replies View RelatedI'm modeling a temperature gauge and would like to have glass over the gauge so the inside is visible. I can easily do this with an assembly, but I'm wanting to do this with a single part. I tried to derive a new part from the assembly, but the transparent part turns solid so nothing inside is visible. Is it possible to do this?
I've include pictures of what I want and what I end up with.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I order not to hide components, i want to make a break sketch and remove a piece from a part from an assembly in the isometric view in a drawing. can i do that?
View 4 Replies View RelatedI used a 2d polyline to create a surface boundary for a surface created. The polyline is a closed loop. For the boundary type it is outer, unchecked Non-destructive breakline, and mid-ordinate distance = 1.
My problem is that when I do this I only get a small portion of the surface to show up within my surface boundary. If I don't have a surface boundary the entire drawing surface shows up no problem.
The purple polyline is my boundary and the light blue is the surface created within the boundary.
I am having real difficulty in putting a fold on a sheet metal part that only fold part of the piece. I have made the part as a solid body and it almost looks the part but not quite.how to draw the part as a sheet metal piece.
The is very simple to make as a sheet metal part, the piece in question is placed into the press brake to the 34mm depth and then its folded to the 13 degree angle.
I'm trying to make a surface cut on my part. The part is a round cylindrical shaped cap with a surface geometry going through the center. I want to make that surface geometry remove some of the cylindrical part by about half the wall thickness.
See the attachment of the picture "cap" for a picture with the surfaces I'm speaking about. The orange features are surfaces and the grey feature is just a solid cylinder that I want to cut. The vertical, cylindrical surface in orange is where I want the grey cylinder to be cut along the curved orange surface. Only on the grey area outside of the orange cylindrical surface is to be cut while leaving everything grey on the inside area of the cylindrical surface will remain.
The picture titled "ideal cap" is the look that I'm going for on the picture titled "cap" which I'm trying to perform this cut on. The picture titled "ideal cap" was made using Pro/E and I'm trying to mimic the same thing in Inventor. How I can do this?
I am trying to make a 3d model in autocad. But I have stuck in a problem. When I fillet the surface then I can not trim the extra portion. I am attaching the dwg file. I use autocad 2012.
Trim problem.dwg
I am trying to design a new mold for some sailing rudders I am building. The files I have for the current molds are in the IGS format, which Inventor can open. The current rudders are convex going from the widest part of the foil down to the trailing edge. The goal is to create another model with this flattened. If I were doing this in logic it would be: Find max height, alter foil to be straight from max height to trailing edge. I have tried everything I can do to make this happen with no avail. what would be optimal is if I could get it set up so that I can easily control the amount of convexness to the aft section, but the primary goal is to just get it to be straight. The trailing edge is the straighter one.
The final goal is to export to g-code and send off to a cnc.
I have attached the files after I have imported them into autodesk, but below is a link to the original iges files.
[URL]
I am trying to make this: L:Engineering-208037SURVEYDRAWINGS turn into this: L:Engineering-208037DRAWINGS
I am using the dwgprefix and it returns the first string and i want to make it in the second string as a new variable or replace the old variable so i can use it in a save as routine i am working on.
The problem is sometimes them project number (0208037) will be longer or shorter so i can't use the substr command
is there a method to project the sketch onto the part so that i can then remove 2mm of that shape from the part....?
Inventor 2013 & Inventor 2014 (work)
In most cases threaded parts are designed without true surface (just cylinder with texture) thus part surface area is calculated wrong (less than it is i real world)).
any automatic way to get true value of threaded surface which is modeled in traditional (simplified) way?
I replaced a part in an assembly with a new part number, it shows the new part number in the browser. but when I switched from model view to Vault view, the old part number still shows there. I checked in and checked out the model assembly file, it did not work to remove the old part number from vault view. I also checked the BOM, the old part number is not in the BOM.
How can I remove the old part number from vault view? will it cause problem in the exporting BOM text file?
Today's Question is as mentioned above, How to remove the loops from a surface?
I have a surface created from the points. Eventually it has got many ups & downs in the elevations, so I did delete some of the points from the surface. And due to this, some loops are developed inside the surface itself with the closed boundaries.
I also tried to draw surface lines in those loops, either they get shorten or gets enlarged but does not completely vanishes...
64 bit OS | Win-7 | 3.60 GHz Processor | 16.0 GB RAM | Civil 3D 2013 |
I have an "existing" surface built. But there has been some construction since my company surveyed the site. So, my surveyor went out and got the new points in the area of the new construction. I am trying to remodel the "existing" surface without rebuilding the entire surface. I have removed the old (demoed) points from the point group used to define the surface. But, the points are not being removed from the surface.
View 9 Replies View RelatedI see BreakLinesDefinition prop, but only add methods.
I assume the RemoveAt is of no use, as you cannot get the objectID of each breakline to decide if its one that should be removed.
COM is the only way it seems.
[URL]
I have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
I'm looking for some direction to follow to modify an existing design. I am trying to thicken left and right walls in order to make the inner section narrower. However, none of my attempts have been successful. I am not looking for learning materials for CAD, but rather a solution to this specific problem.
View 3 Replies View RelatedLet's say I draw a rectangle and extrude it. I then go into the sketch and draw two lines perpendicular to two existing lines, which gives me a smaller rectangle in one of the corners of my large rectangle. I then want to go into the extrude feature and "deselect" the small rectangle. How do I deselect?
View 8 Replies View RelatedI need to capture a portion of a file path that is in the middle of the entire path.
For example
C:Vault WorkspaceEngineering810810-050000Model
I just want to capture the 810-050000 part. The portion before that may be different lengths, the Model portion will always be the same.
how I can add more volume to curved object surface? Say for example I have a plastic cup.You can think of this as cylinder object ,which was the shelled out using the shell tool and then had its base sealed.
Now at certain parts, I would like to increase the thickness and then blend it the rest of the surface(may be chamfer its edges) .
At certain parts on curved surface I would like to add an extra mm, I think if the surface was flat I would just sketch the shape, then extrude it by few mm and smooth the edges by doing a chamfer
But how can this be done on surface that is curved? Or multi curved for edges?
I'm designing a press for a skateboard similar to: Rib Press
I have the board modeled: (see attached)
Now what i want to do is generate those ribs as seen in the picture.
I tried creating a block that intersected with the board and tried to split the rib at the surface, but to no avail. I think the issue has something to do with the curve of the board in two directions, but i can't seem to get it right.
if you are having trouble visualizing what i'm asking about, look at this. I want to be able to figure out the exact shape of those center ribs to print and eventually cut out of wood.
It is not possible forme to add the fil because it is to large 1.8MB how can I poste then I like to know if it is possible to extend the button flat surface diameter ø12.5 up to the shaped surface. The result should be a total solid block whit a surface shaped hole.
File last up-date with Autodesk Inventor Professional 2013
I am trying to merge the gaps left from extruding a flat surface off a circular surface, delete face and heal does not appear to work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have got this code by KEAN WALMSLEY.His code will ask user to select a block and then list all of selected block's attributes. However, I need to tweak his code a little bit and instead of user interaction, the block has to be selected by its name and through my code.
Here is his code (with slight changes to suit my purpose):
rivate Sub ListAttributes()Dim ed As Editor = Application.DocumentManager.MdiActiveDocument.Editor Dim db As Database = Host Application Services.WorkingDatabaseDim tr As Transaction = db.TransactionManager.StartTransaction() Try Dim filList As TypedValue() = New TypedValue(0) {New TypedValue(CInt(DxfCode.Start), "INSERT")}Dim filter As New SelectionFilter(filList)Dim opts As
[code]....
Now, I need to change this Sub to a Function as below:
Private Function ListAttributes (blockName As String) As Boolean
The aim is to list all block attributes if the 'blockName' exists in drawing and return True afterwards. Oppositely it should return me False and print nothing to Editor if blockName does not exist.
Is there a way to have a view in a sheet that displays a few specific components of an master assembly? There is a motor/gear-box assembly within my master assembly that I don't want to make a separate assembly for BOM purposes, but I want a .ipn view with the motor/gear-box "assembly" exploded. I tried making everything else in the master assembly "not visible" for the particular .ipn view, which works fine, but if I add or replace anything in the master assembly, those additions appear in the motor/gear-box .ipn and screw up the view.
I could just make a whole new assembly for the motor/gear-box and use that for the exploded view, but I would rather the view update to reflect slight changes I make in the motor/gear-box "assembly" from within the master assembly.
So can I create a .ipn view and say, "I want these particular components of an assemly to appear in this view but nothing else"?
I'm trying to create an assembly and there's one part of one piece I'm struggling with. I attached a quick sketch I made of it. I'm struggling with the bend portion that I lined in. If my drawing doesn't make sense, that piece is 5" long, the bend is 5/8", and it's a cylinder. I'm sure it's really easy but I'm blanking. I've tried the bend tool to no avail.
View 3 Replies View RelatedI have to solids. They are intersecting each other, I want to remove one solid which is inside. It's a Civil 3D 2012 QUESTION.
View 5 Replies View RelatedI would like remove(delete) all brealkine sets inluded in definition of surface.
try
{
Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
[Code]...
However, I don´t understand how I can get type of Surface Operation..
This code line doesn´t work.
if (OperationColl[i].GetType().ToString()== "SurfaceOperationAddBreakline")
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I've just started learning AutoCAD and came across my first obstacle I don't know how to work around. Here's what I'm trying to do.
I draw two lines and two circles and then trim the excessive parts as in the picture (in general it can be an area composed of various types of lines, straight lines, arc, and likely with rounded corners).
Then extrude to the height 2. This makes 4 surfaces (green). Now I build a solid 'around' the surfaces. In this example I draw a rectangle and extrude to the height 1 (red). And my question is: how do I remove the part of the solid that's enclosed within the green surfaces? Subtraction doesn't work as I don't subtract solid. Slicing doesn't work either as it's more than one surfaces. For the same reason I can't turn it into a solid.
acad02.jpg
Some images in threads are now showing up with the lower portion of the picture blacked out. Its like there is a limit on how large the image can be. Many times what the posting memeber is trying to show is blacked out.
View 9 Replies View Related