AutoCAD Inventor :: Drawing Views Are Currently Draft Preview
May 10, 2011
I've been using Inventor for a few years now and haven't seen this. It created a base view with green marks and when I go to print it says
"One or more drawing views are currently draft previews. Draft previews differ from final views in quality and may produce visually different results. Would you like to wait for views to update before printing or smash the screen from irritation of having a new roadblock thrown in your way that we make no effort to remove for you? HAHA you ignorant fool you will never learn all the idiosyncrasies of our product".
Which I thought was a bit unnecessary.
It does make some effort actually. It sits there with a progress bar. This drawing is about as simple as I create and it can't get past the progress bar. If I print anyway, there is no line weight. So where is this little switch hidden to turn this off? I've already fiddled with background updates and the sunglasses are not checked and grayed out. I don't know how I never ran across this problem before or what could have changed. Given the performance of my computer, I don't think I need some low grade preview for drawings of this type.
View 9 Replies
ADVERTISEMENT
Jun 12, 2012
How can I dimension a draft angle in a drawing similarly as in the attached file, but without using a sketched line?
View 2 Replies
View Related
Dec 16, 2011
I'm currently working on a Spa design and using new tools which is all new to me. I've used Draft Angles before but on a spa where you sit normally the sit reclines back.
Now I'm not sure how to do / show this in a 3D drawing. I've read and serached for different things but have yet to find something similar I'm looking for.
I've attached a PDF along with the circled area as to what I'm trying to accoomplish. Wanna be able to show the dip etc via Inventor.
View 1 Replies
View Related
Sep 5, 2013
When creating multiple sections using the draft option what settings control how the sections are placed? For example, 5 across, 4 down.
edit - I have several alignments. One that has 8 section views is created with 4 across and 3 down, another with 18 sections is created with 5 across and 4 down and a third with 34 is created with 6 across and down. I'd like to be able to control this if possible.
View 1 Replies
View Related
Feb 9, 2013
running autocad 2012: there is an autopreview that shows what the command will look like before I hit return. How do I turn it off.
The issue is: I am overdrafting what Autocad is able to keep up with. I feel like I am now at half speed... I can replicate the same issue: offset x dimension; I move to left and hit enter; in the same instance autocad has autopreviewed right, and that becomes the command that sticks. really annoying... I have run ADT with bloated files on the same machine and not had this problem, so I figure its this feature that is causing the slowdown for me.
View 6 Replies
View Related
Sep 20, 2013
I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
View 6 Replies
View Related
May 21, 2013
I have a problem with one of my Inventor DWGs.
It seems that whenever I save the associated model, there is a chance that it ruin the drawing by scattering views, dimensions and sketches randomly.
View 2 Replies
View Related
Aug 10, 2012
I want to extract 2D drawing view of the attached model. I tried but could not succeed because most of the sketches are on the angled user defined work planes.
See the following links, I did the same for some of my other models:-
[URL] ...
[URL ...
How can I show the modelling process of this model with 2D drawings?
View 1 Replies
View Related
Aug 31, 2012
I am using Inventor 2013. For some reason I cannot dimension some of the model entities in the drawing views in an idw file. I can retrieve the model dimensions but it is usually easier to create the dimensions I need in each view. I can select the line, curve, etc. when dimensioning but nothing happens.
After I think about it. What I cannot dimension are lofts that I created with rails. These rails were made up of lines and curves, not polylines. How do I get the sketches for the rails I used for lofting to display in the drawing views so I can dimension those sketches.
View 9 Replies
View Related
Nov 10, 2013
I made a drawing and later changed the part to an ipart.
The dimensions of the table part in the drawing are o.k. but the iproperties, the contents of the logo doesn't update and it has a strange number string.
There is the yellow lightning symbol and even though i press update all sheets nothing happens and also the lightning symbol remains
View 2 Replies
View Related
Dec 5, 2002
Why is it that individual views in an .idw always need to be updated? I will highlight a view, the thunderbolt icon lights up, I choose to update it, the view in the browser turns red and then the view up dates. if I highlight the view again it tells me the view needs to be updated again.
View 6 Replies
View Related
Nov 16, 2012
I was wondering if it was possible to make my drawing views more streamlined.
Currently, when I add a drawing view, the part number and scale is pulled from the part and scale chosen. So this is good; but I would like to get the styles editor to add the actual view of the part into its name.
For example, if I choose the top view, the naming should look like the following:
TOP VIEW
XXXX-XX
SCALE: X/X
So basically I'd like to know if its possible to pull that information and display it in the naming text box. I would assume this is possible as all the other parts are possible, I don't see why this isn't an automatic default.
View 1 Replies
View Related
Aug 13, 2013
I am not able to move any of the views in my drawing (*.idw). As instructed by the web page this should be as easy as "click and drag the red border", but this does not work. I cannot move the dimension annotations either.
I am using Inventor 2014.
View 3 Replies
View Related
Aug 15, 2012
Working in an idw file, I have a need for two drawing sheets with the identical views of the same part. However, each sheet will need different dimensions and annotations. What I would like to do is after completing one sheet, in one step create the second identical sheet, then just edit/add dimensions and annotations. Is there a method to do this? So far, I have only been able to copy one view at a time from sheet to sheet.
View 2 Replies
View Related
May 20, 2013
I have a top level assembly created from multiple subassemblies. In my drawing view, I would like to add leaders calling out the subassemblies. Is this possible with Inventor 2013? It seems easy - am I missing something?
I tried adding leaders, and selecting the model properties, selected the subassembly, then picked part number. The leader always reverts back to the part level.
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
View 1 Replies
View Related
Apr 18, 2013
I'm trying to put together some iLogic code to either check all the drawing views within a drawing sheet are all the same scale, or make the views all the same scale. These drawing sheets consist of a number of individual parts (they aren't projected views from a single part).
This is for welded assemblies. We are required to generate a profile drawing sheet outlining each part that makes up the assembly. We send these out as dwg files for laser cutting so its important that the views are all the same scale.
View 7 Replies
View Related
Feb 23, 2012
Why is it that when I create a dimension across geometry the dimension shows true, yet if I create sketched geometry in the drawing view it does not?
What I need to do is create an arc of swing for a door. So I create a sketched arc and then want to dimension the arc radius of the door, yet the dimension shows not true. How do I make it true? And why can't I snap to model geometry in the drawing view?
View 6 Replies
View Related
Jun 23, 2011
Problem: I have a part that goes through several processes, casting, machined, finish. I want to create a drawing sheet with views displaying the part through different stages.
Solution One: Create as many different parts (with different file names) for each stage and place the views accordingly. Really? Three or more part files to illustrate a single part?
Solution Two: Create a user parameter that will auto-suppress features to create different Levels of Details on Parts, but there is no way to initiate/set the user parameter for different views.
I understand 2012 has the ability to create part design representations, but we are still on 2011 and I am leery to upgrade for a feature that still might not work properly.
There has to be a way to suppress features in a specific view...iLogic? iPart? anything? I simply can't believe this is the case.
View 9 Replies
View Related
Jan 3, 2012
Is there a way to associate a text string to a drawing view so when the view is moved
around the text goes with it and remains placed in accordance with the view?
View 9 Replies
View Related
Feb 14, 2013
Sometimes when a drawing is opened in Inventor, the complete design is not visible on the sheet. Only few lines appear on the view.
View 2 Replies
View Related
Apr 5, 2013
Is there a way to supress some features ( holes, slots, extrusions etc ) in only one drawing view?I'd like to create a few copies of the same view, but show only relevant features for clearer understanding and dimensioning in each.
View 6 Replies
View Related
Jun 5, 2012
Somewhere along the lines I must have clicked something to lock my views in drawing mode once I place them because after placement I cannot click and drag them around anymore...
Inventor 2013 PDS
----------------------
Inventor 2014 PDS
View 7 Replies
View Related
Feb 10, 2012
Is it possible to automate dimensioning of drawing views?
Here's the situation: I have an Inventor assembly that's controlled entirely by iLogic. My users, who have zero Inventor training/experience (or with any 3D CAD software for that matter), pull up the assembly. They enter product related parameters from paper work orders into an iLogic form and hit a "Go Button". The assembly updates based on the parameters, suppressing and unsuppressing parts, features, patterns, and mates. This works great. They then hit a "Run Job" button. This takes them to an .idw where they fill out another form with order specific information and hit another "Go Button". This then cycles through every detail sheet and the parts list, deleting sheets deeemed unneccessary for the product, generating part numbers, exporting dxf's, generating an excel BOM, etc.
This works great as well. The problem is with the dimensions. They blow all apart when the model changes. I know I can run some API code to delete dangling dimensions, but is there away to programmatically create dimensions so I don't have to rely on my users remembering what needs them? I've played around with using model dimensions, but I find that they stay and remain attached even when their corresponding feature gets suppressed.
IV 2012
View 1 Replies
View Related
Jun 29, 2011
I'm having a problem with sketches not appearing on drawings in Inventor 2012. This is for a product line made using iparts and iassemblies, and affects approximately 150 drawings.
These sketches were made in Inventor R11, and are attached to part features in the drawing view. When opening these drawings in 2012, the dimensions that were attached to the sketch are still visible, (albeit in the wrong places and on the wrong features), but the sketch itself is not. The sketch still exists as an item under the view, but the actual contents of the sketch (lines and hatching) are gone.
The assembly consists of three identical cylindrical parts with mitred ends welded together in two operations to form a T-shaped part. I have a view representation for each operation. The drawing has each view on one page.
The first step requires welding the two parts together to form an "L" shape, and then cutting off a portion of the corner of the "L" to facilitiate joining the third part in the second operation. In my assembly, I mated the two cylindrical parts together, then created a sketch and using geometry projected from the parts, defined the area of material removal at the corner and extruded the feature. Then, I mated the third part.
However, since I cannot turn off the extrusion when defining a view representation, I needed to redraw the corner I removed so it reflected reality when showing this first phase on the drawing,. I accomplished this using a sketch on the view in the .idw, again using geometry projected from the part. This worked out excellently in Inventor R11. Not only was I able to show the missing part, but because this was an iassembly made from iparts, I could use the same drawing for differnet sizes by "saving as..." and then selecting a diffenent Assembly State on the Model State tab of the Drawing View Dialog Box. The views would update, and so would my sketch, since it was defined by the geometry of the part.
So we continued on this way, and now that we've moved to 2012, none of these sketches appear anymore. We're faced with having to redo this work on every drawing that we've created for this part -- about 150 or so.
View 7 Replies
View Related
Apr 28, 2013
I have an assembly which is a plated structure. I am using a skeleton file of surfaces to define these plates. I am deriving the required surface/s from this skeleton file into a part file. In the part file I have used thicken to create my plate part. I also turn off the visibility of all derived surfaces in this part.
Now in the plate part when I go into edit derived part - the surface I have used is not grayed out showing it has been consumed by my thicken feature??? I place all my part files into an assembly and create views for each part using isolate (I use these views in a drawing which is used for NC plate cutting)
So the problem I am having is that when I place a view in my drawing the derived surfaces are also showing.
However I have used this modeling technique for many previous projects on previous versions of inventor and have never had this problem.
As mentioned above I have used isolate to create these views. I have since gone back and created the views by turning off the visibility of all other components and the surfaces do not appear in my drawing views.
View 3 Replies
View Related
Apr 22, 2013
I've poked around a little and made simple rules to manipulate iproperties, save filetypes, change drawing borders etc. but am now looking for a bit more and am struggling (i.e. completely lost.) I want to automate the creation of an assembly drawing from an existing presentation file. Here is the basic break-down:
Assumed Pre-Requisites:
- Using Inventor 2011
- Presentation(*.ipn) file is present and saved in same directory
- Each presentation VIEW is numbered and named (e.g. "1 - PCB Installation", "2 - Battery Insertion", etc.)
iLogic/VBA Code should:
- Select presentation file (either auto or allow user browse/select)
- Create a page in the drawing (*.idw) for each VIEW from the presentation file
- Create a base view on each page for each presentation VIEW (in numbered order)
- Each base view orientation will be derived from Saved Camera
- Each drawing page will be named using the name from the corresponding presentation VIEW name
- Each page will have a prompted entry in the Title Block that will be defaulted to the presentation VIEW name
View 1 Replies
View Related
Nov 12, 2012
Is there a way to have the lines in drawing views be the same as the part colors instead of black (like MDT used to do)? Not rendered, 2d lines.
Also, when exporting to .dwg part color lines & the parts as blocks would be great. Ok, maybe I'm asking too much.
2013 IV Pro, SP 1.1
Win 7 Pro
View 1 Replies
View Related
Feb 8, 2013
When I create a "Break" in a view, Inventor glitches. The other views, and even the border, title block, and whatever else is in the drawing, will disappear. The other items reappear if I "Zoom All". Is there an update?
View 1 Replies
View Related
Sep 20, 2012
Is there any way to control the priority of what information Inventor displays "on top" in a drawing when you have two elements that overlap?
My specific situation is I have a text note whose boundary (where the text 'box' would be if that was turned on) overlaps a detail of a section view and seems to be preventing the display of the hatch layer in one of my section views.
I have attached 3 pictures to show this problem. The pictures show the section view in 3 slightly different positions relative to the text box. I selected the text box before taking the screen capture so you can reference the green "handles" to know where the boundary of the text box would be. Notice how the hatching of the welds, flanges, and pipe as well as a portion of the extension line and arrow for the 3/16 dimension are 'covered' by the boundary of the text box.
Is there a way to control the priority in which different layers are displayed, or is there a function similar to the "Bring Forward/Send Backward" options in Microsoft Word?
FYI, I am running Inventor 2013 RTM build 138.
View 1 Replies
View Related
Apr 17, 2013
When I try to suppress the bodies in the multi-bodies part to clarify the drawing view, I can not do that the way I normally do that if I had an assembly and suppressed the component.
Is it something Autodesk can improve on or rather something I overlook.
View 7 Replies
View Related
Mar 13, 2013
I am working with several drawings that were created, I believe, using Inventor 2011. I am currently using Inventor 2013. I noticed some views do not show the outlines of custom parts created using Content Center. And it's only some of the parts within the view. The outlines of parts created the same way show up correctly. The B.O.M. structures for the parts are set to Normal. I toyed with the Drawing View Settings' Display Options with no avail. When the Drawing View is set to Hidden Lines Removed, the part doesn't appear at all. When I select the shaded option, the part appears, but there is still no outline.
Along similar lines (no pun intended), sometimes the outline extends beyond the actual part location. For example, a pipe that is 24 inches will show up in the drawing view as 72 inches. When the shaded option is selected, the part appears correctly, but the outline extends beyond the shaded area.
View 8 Replies
View Related
