AutoCAD Civil 3D :: Unable To Assign Coordinate System When Importing LAS Files
Aug 8, 2012
I have been trying to import LAS files via Civil 3D 2011.
To do this I first turn the workspace to ''Tool based geospatial''. Then i assign a global coordinate system which is the same one as the LAS file i am importing. The in the task pane window (command: mapwspace) under display manager tab i right click on map base --> data --> add point cloud data --> create new index and then choose the file I want to import. Here i have some trouble; in the create new index window i am unable to assign a coordinate system, i can find the one i need but i cant select it (or any other), it persists on staying unselected. I am able to create an index without a coordinate system but I need it with the right coordinates.
View 5 Replies
ADVERTISEMENT
Oct 18, 2012
I recently upgraded to Map 3d 2010 to Mapd 3d 2013 and i cannot figure out how to find the commands to insert images or import/export shp files.
I'm running 2013 in "autocad classic" and did so with 2010 as well. 2010 had a menu bar pull down called "Map" where I could insert an image (Image->Insert). There was also in 2010 a toolbar named "Map" that had import shp, export shp and assign coordinate system.
I can't find any of this in 2013. I can't even find the commands in the customization to create my own toolbar. The commands work (mapiinsert, mapimport, mapexport and ADESETCRDSYS) but i can't find them listed anywhere.
View 2 Replies
View Related
Aug 15, 2012
I'm using Map3D & Raster Design 2012.
I have connected to some SRTM DEM data, but the resulting terrain and contours I generated are not showing properly. Specifically, the map area is stretched out of shape (too wide L & R). I seem to recall it had to do with setting the proper "define coordinate system" option for the file.
View 2 Replies
View Related
Dec 23, 2013
We're looking into the "Workflow" system in Map3d.One of our most common tasks is to Set the coordinate system and then add a georeferenced image (such as a SID file).
I'd like to create a workflow that will do this -- but I'm having trouble figuring out how to get it to set the coordinate system. I will eventually need to tell the image what coordinate system to use (we normally have to edit that manually).
View 8 Replies
View Related
Jun 21, 2011
I installed ArcGIS into my Map3D 2011 and now when I enter the command ADESETCRDSYS there is no longer a dialog box that pops up, it is all in the command line. This wouldn't be a problem, except it doesn't allow you search through the codes. I have looked for a system variable that might control it, comething simular to filedia, but have not been able to find one.
View 2 Replies
View Related
Nov 3, 2012
I want to know why I can't change coordinate of points while importing points from Points menu?
I created new file, assigned any coordinate system to the model. Opened Import points windows there, created new file format which there I assigned Coordinate zone transform to the coordinate system of the text file and imported my text file. But the coordinates of points didn't changed or transformed. When I do it by Survey in Toolspace its works good. I want to know whether I did any wrong or it is problem of software.
I use AutoCADCivil 2013 64 bit in Windows 7 64 bit!
View 2 Replies
View Related
Dec 20, 2013
We currently utilize AutoCAD for our mine mapping purposes. I recently had a seismic study performed to determine the top of salt. I asked for a .dwg file of the contours that were developed. The .dwg file they provided does not have our autoCAD map on it. They are simply contour lines. These contour lines, however, have the same coordinate system as our mine map. The surveyor and I provided coordinate data to the company to develop the contour lines. I would like to lay these contours into our mine map. How do I import the contour .dwg file into our mine map file so that they lay exactly where they should?
View 4 Replies
View Related
Mar 14, 2012
how do i get an image set in one coordinate system come into a drawing in another coordinate system?
View 3 Replies
View Related
May 28, 2012
I want to know how to transform OCS Coordinate of A block object to UCS or WCS Coordinate .
It's Block's OCS Coordinate not other objects.
View 7 Replies
View Related
May 23, 2012
How do I add my own system in Civil3d? We have a little strange system here with a deformation model, but I suggest that isn't a problem.
View 2 Replies
View Related
Sep 2, 2013
I want to have a piece of text added to the drawing notes that uses a field (or similar), to list the coordinate system code assigned to the drawing, i.e. UTM83-12.
Any setvar or something that I can use?
There are load of different coordinate systems to choose from, and I don’t want to have to manually enter it for every drawing.
View 9 Replies
View Related
Nov 20, 2012
My group is trying to convert a dwg from one coordinate system to another. The original drawing contains points, blocks, etc. in 1 system and we need it in a different one. We tried attaching the dwg to a new map with the new system using a layer query, but this did not appear to bring in the objects into the new system.
"Structures" is in the original system (OR83-NF), "StructuresHarn" is in the desired system (ORHP-NIF)
P.S. C3D 2011
Civil 3D 2013, HF3.0
Windows 7, 64-bit, SP1
View 2 Replies
View Related
Feb 16, 2012
I am trying to convert point data from NAD83 State Plane Coordinates to UTM coordinates.
View 3 Replies
View Related
Mar 2, 2012
How can I show coordinate on Civil 3D? I inserted a map from Google earth and I want the coordinate to be there.
Civil 3D 2012 SP1
8 GB Ram
i7-2630 @ 2.0 GHz
64 Bit Window 7 OS
View 9 Replies
View Related
Apr 13, 2012
I am a new user of civil 3D 2012. How to write a new coordinate category in my computer.
I am using a 64 bit windows 7 and everytime I attempt to write a new coordinate system category it always display the words " no access to write to the dictionary".
View 3 Replies
View Related
Apr 22, 2013
I have Points in Civil 3D that are in the Washington State South Zone NAD 83 Coordinate System and would like to get these points converted to Washington State North Zone NAD 83 Coordinate System. I am able to convert drawings entities to the new coordinate system using MAPEXPLORER but the points do not go with it.
View 4 Replies
View Related
Nov 5, 2013
We are having a bit of a debate in our office. When you are working on civil engineering project where you are recieving files form Architects and Landscape Architects, and sending out "Dumbed Down" AutoCAD files to folks who don't have Civil3d, do you change your Civil3d Coordinate System to survey feet & specify your state plane coordinate system?
View 1 Replies
View Related
Feb 20, 2013
I have created a custom coordinate system in AutoCAD Civil 3D 2012 using MAPCSCREATE command. My issue go figure is I created it incorrectly and now I want to delete it out of the system.
View 2 Replies
View Related
Jun 7, 2012
I think this problem started after installing C3D 2012, and I don't think it's related to the UAC problems. I tried asking my reseller about it, but got no answer.
This happens with all projects that use Custom Coordinate Systems created in C3D 2011 or earlier. When opening the drawing and going into "Drawing Settings", I get this, and have to click seven times through the error box to finally have it do nothing:
Then, if I go back to Drawing Settings, I see this:
Notice how most of the dialog box settings are missing.
This stuff all worked fine for years, but seems to have gotten broken as soon as I installed C3D 2012, and is still broken in C3D 2013.
View 5 Replies
View Related
Mar 16, 2012
I just installed AutoCAD Civil 3D 2012 last week from upgrading from 2011. I just noticed that when I set up a new drawing coordinate system for a horizontal datum, I get a message "Coordinate System Code is not Valid". I know the files are loaded under the documents and settings folder, but I don't know why it's not reading them.
View 2 Replies
View Related
Jan 3, 2013
When assigning a coordinate system to my drawing in Civil 3D 2013, the drawing does not retain the selected system.
I choose the coord system I want in Map Setup and apply it (in this case MT83IF). After applying to the drawing I go back to verify the selected coordinate system and the dialog box indicates "N/A". The only workaround I can find is to save the drawing back to an earlier version and open it on another computer in the office that is running 2011. There I can assign my coord system and then reopen in 2013 where it now shows it properly assigned.
I have tried other coord systems to make sure it isn't isolated to just the one I am selecting - and it happens with all others I try. I have also tried a repair on my install to see if that would correct it to no avail.
I have a 64 bit system and have installed all service packs to date.
View 3 Replies
View Related
May 30, 2012
I have a custom coordinate system defined and would like to send it out to a client, since they're having trouble creating a new coordinate system based on my parameters. Is it possible to sent that as a file so they can copy it to the appropriate folder or is it embedded in a database somewhere?
View 1 Replies
View Related
Dec 18, 2013
If you create any custom coordinate systems in 2014 products (Civil3D, Map3D) *.CSD files are created in C:Users{user_name}AppDataLocalAutodeskUser Geospatial Coordinate Systems with the additional data in them.
My question is - can you have multiple 'coordsys.csd' files?
The reason for asking is that we are setting up a large number of low distortion projections that are specified by a government roading agency and I figure the best way to distribute these is to create a coordsys.csd with them and sync it out to everyones profile (the location shown above), but there could then be issues if a user then sets up some additional coordinate systems that will only be on their computer, if we altered or expanded the company definitions and sync'd these out again it would overwrite the users ones.
It would be good to be able to have mutilple custom coordinate system files - ones for particular clients, countries, individual users etc.
Civil3D 2014 - Windows7 64bit
View 4 Replies
View Related
Feb 25, 2008
I'm would like to know about conversion for those Global Coordinate System . For example : (Country : Australia , region Perth) I have AHD PCG94 Coordinate system as follow [ 44650.59 E , 202428.59 N ] & [ 44673.43 E, 202414.57 N ] . How to convert those coordinate system to suit the object into my current drawing with MGA94 (Zone 50) with Civil 3D software ? Or AutoCAD MAP which partially integrate in Civil 3D might work with this ?
View 4 Replies
View Related
Mar 21, 2012
We are starting a project that we will be preparing a site grading plan for.We are being provided with an ALTA Survey drawing that is on state plane coordinate system, and the existing topography that I will be using for my existing surface is on a UTM coordinate system.
The site grading plan needs to be on state plane coordinate system that the ALTA Survey drawing is on.
I haven't done it before but I understand you can use Map 3D and take drawings that are on different coordinate systems and have them line up properly.
If I have my existing surface in a UTM coordinate system and want to data shortcut it into my site grading plan that's on state plane coordinates, will that work?
View 9 Replies
View Related
Jul 10, 2012
I have a small field (5 by 5 meters) to be set out with about 40 points. Currently i use EOV (Hungarian National Coordinate System), thus each point has a lot of digits. I want to make the implemetor's job easier, so i want to move and rotate the CS near to my field.
I tried to use UCS, but the COGO points retained the "World" coordinates.
How to carry out this without moving my whole drawing to the origin?
View 4 Replies
View Related
Jul 23, 2012
In AutoCAD Civil 3D 2012 when assigning the state plane coordinate system LA83-SF is missing from the Library. Although it is visible as a choice to select in the Available coordinate systems window when creating a Category.
View 8 Replies
View Related
Jul 11, 2013
When the attached shape file (change soilmu_a_a.txt to .shp) is imported using MAPIMPORT the data aligns with other imported georeferenced raster imagery (said imagery was imported using the MAPIINSERT command). If the same shape file is imported using the data connect tool it shows up in a much different location (see word document).
The drawing coordinate system code is "UTM83-18F" and the data was downloaded from the Web Soil Survey's data download with the identical coordinate system (see attached readme.txt).
I prefer to use the data connect option when importing this type of shape file because I can label them all using a theme and use stylize the data for visualization/presentation.
As an aside, I have found that data connect does not automatically transform data coordinate systems to match your drawing coordinate system as advertised. I've used the edit coordinate system to no avail; however, again when the file is imported using MAPIMPORT and saved as a drawing (with native data coordinate system) and then that drawing is queried from a drawing in a different coordinate system it seems to transform the coordinate system just fine. Is this a problem with data connect?
View 7 Replies
View Related
Aug 30, 2012
I can not change coordinate systems of Surface models and COGO points. Why?
View 4 Replies
View Related
Jun 11, 2013
saving the 'Map Coordinate System' on a specific drawing? - For example, I need to use Coordinate System MGA-55 when working on an Australian Project, and UTM84-39N when working on a Kazakh Project, however, if I set my coordinate system to MGA-55, then save my drawing, the Coordinate system resets to UTM84-39N when I reopen the same drawing (it appears not to be saved with the drawing). I'm Using 'AutoCAD Map 3D 2012 (64bit) running on Windows 7.
View 2 Replies
View Related
Sep 27, 2011
Im on a project including inserting an FAA sectional map and plotting new points on top of it. Im trying to setup the coordinate system right now before i import the data and i dont see an option that matches the map exactly. Im including the information from the metadata file included with the geotiff.
Bounding_Coordinates:
West_Bounding_Coordinate: -94.175741 East_Bounding_Coordinate: -84.616261 North_Bounding_Coordinate: 44.589505 South_Bounding_Coordinate: 42.107198 Ellipsoid_Name: Geodetic Reference System 80
Map_Projection_Name: Lambert Conformal ConicLambert_Conformal_Conic:
Standard_Parallel: 46.666667 Standard_Parallel: 41.333333 Longitude_of_Central_Meridian: -89.000000 Latitude_of_Projection_Origin: 42.666667 False_Easting: 0.000000 False_Northing: 0.000000
View 5 Replies
View Related
