I keep changing the Command Alias Editor in ACAD 2010 so I can use the hot keys I have grown accustomed to. They work fine but when I close ACAD then reopen it goes back to defaults and I have to change them again. I know it's probably loading the wrong menu file or something simple but figured I would ask the experts before I start moving files around.
View 2 Replies
How to get the 'Shape to Block' command to work (under express tools).
It says select object, but no matter what object I select eg. circle, pline or line, it says invalid selection. I am running AutoCAD 2012. Are 'shape' objects somehow different from any other objects?
I am able to use the menuload command to load the express menu, but when I try to execute one of the express tools. AutoCAD say invalid command, there was something on the website that said to type express tools at the command prompt, but when I do that, too it says invalid command.
View 5 Replies View RelatedI am trying to use the Arc-aligned text command from the Express tools menu. No matter what style, height, offset i enter i get a box that says "Invalid text!". I never use this command in my work but am trying to create a banner
View 1 Replies View RelatedTFRAMES command in 2010 doesn't seem to toggle image frames. It just continuously turns them off.
View 7 Replies View RelatedI know that there is a Save All command in express tools but if one does not have express tools installed or loaded how can they access this Save All function from the command line?
View 9 Replies View RelatedI can not find the tcircle command
View 1 Replies View RelatedI installed express tools with ACADE abd ACAD, some of them don't work, example:
_.sysvdlg Unknown command "SYSVDLG". Press F1 for help.
other commands missing:
arctextx, txt2mtxt,mocoro,dimex,dimin,qlattach
I have problem with my Autocad 2011,It always showing a message "unable to load acetauto.isp/fasload failed"
View 1 Replies View RelatedI am using AutoCad Civil 3D 2012, with windows XP, and when I type "extrim" at the command line, I get this:
Command: extrim
"bad argument type: listp #<SUBR @2f9669b0 BONUS_ERROR>"
There are also a few other express tools that when picked from the ribbon menu, do not work either. Now, I have seen elsewhere on the web that in this case, you should make sure there are no search paths set to R14 Bonus tools (which mine aren't), or repair and update express tools from add/remove programs in the control panel. I did this, and the only thing that happened was the numbers after SUBR@ changed.
WHERE AND HOW THE EXPRESS TOOLS ARE LOADED?
View 8 Replies View RelatedMy application works with function it acet-ss-drag-moves of Express Tools. Can I distribute AutoCAD Express Tools with the program of Installation of my application?
This to guarantee that Express Tools will be with the user's AutoCAD. If this is possible what document should I use?
I get the following error message when I hit the "Draw Order" button or try an "Express Tool" command. I just installed Acad 2012 and it does not load.
Command:
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
Command:
Command: blockreplace Unknown command "BLOCKREPLACE". Press F1 for help.
When I try to open any of the Hydraflow extensions, I get the following message: "Installation error Invalid installation. Program ending." I ran a repair from Windows, but get the same result. How to successfully open/use any of these Hydraflow components in 2010?
View 6 Replies View RelatedI had express tools loaded, but now I have a problem. I try downloading Auto CAD True View, but did not get it to work, since then I have been getting unknown Command "txt2mtxt" now none of my commands work. I try auto cad repair from the install program and it still does not work.
View 1 Replies View RelatedI recently upgraded to 2012 but forgot to install the express tools, Doh!. I installed them through control panel repair and everything works. Except when I close and restart ACAD the menu bar express menu disappears. I can bring it back by using cuiload but this is not ideal. Any way to get it to stick?
AutoCAD 2012
Dell Precision T7400, Intel Xeon @3.4GHz
Win XP 32bit 4GB RAM
Nvidia Quadro FX 3700
Cyborg R.A.T. 7 mouse
I have the express tools loaded and it shows in Autocad. But when I try to use a command it says unknown command. I have tried unloading and loading the express tools many times but the commands in express tools aren't working.
View 9 Replies View RelatedI am trying to find the command of Save as... so I customize it and make it a short curt...
View 2 Replies View RelatedMy question is: Why certin AutoCad files, I'm not able to draw lines?
I'm in model space. I can move objects. I can even erase/delete things. But I'm tring to edit this shop drawing, i need to add some details, so i need to draw some lines. I use the "l" command. Select my 1st point, then 2nd point. It doesn't work? The Command line keeps saying: Specify next point or [Close/Undo]. But no lines are getting drawn. i finally have to hit escape to end the line command but no lines have gotten drawn. its the same thing if i draw a square or circle. (Not sure if you need to know this but these are my companies files created by a former employee of my company using our own AutoCad. So, i would think if he's locked this file somehow, i should be able to unlock it.)
i m trying to move arc text from one location to other but i cannot move it..
View 4 Replies View RelatedAll my plain AutoCAD seats are running their Express Tools correctly but the AutoCAD that comes with Inventor will not.I have ET partial loaded in my custom menu, just like the plain seats, and it shows up in the pull-down menu and the ribbon but when i pick on any of the tools, it says "Unknown command."
View 6 Replies View RelatedWhen I search on Express Tools in the Help section I am told to type EXPRESS TOOLS int the Command Line. That produces the error msg. no such command.
View 2 Replies View RelatedI am currently running Building Design Suite Standard 2014. I have always used several of the tools on the express menu. Convert to mtext, arc aligned text, are 2 of the tools that are not working for me at this point.
View 9 Replies View RelatedCan I uninstall Express Tools?
View 3 Replies View RelatedIs Express tools an option in Acad 2012 LT and if so how do I install it... It does not appear as an option in add remove programs.I would also like to know do you need express tools for super hatch?
View 1 Replies View RelatedMost efficient way to transfer my custom pgp commands? I'm constantly moving between different computers and autodesk versions.
I used to just be able to overwrite the acad.pgp file in the support directory but this doesn't seem to work in the newer versions and I'm hesitant to continue like that in case their are new commands introduced in newer versions that I don't know about then they'd be over written.
Is there anyway to include my command overrides (eg. c=copy) in my back up cui file?
When I create a rectangular box in Autodesk Inventor 2008, shell it, and create a new sketch on any face and press E I expect to be greeted with the extrusion options. This does not happen, and a command alias input dialog appears in the status bar.
I really want to turn this off, since it has happened on other occasions as well. Since there's no other way to get to the extrusion feature, it completely halts my work.
Usually when I don't know what a feature is for and I'm not attempting to use it I expect to not see it- especially when I perform actions that don't usually bring it up. I'm not sure why the behavior has been put there. Hopefully it's not put into later versions (I've seen 2010 complaints as well) so someday an upgrade will remove the annoyance.
I'm trying to get familiar with AutoCAD. Google and didn't manage to solve a problem :
In AutoCAD LT 2013, I created a custom command called Special fillet :
Name : Special filletDescription : Round a polylineCommand display name : SFILLETMacro : ^C^C_fillet;p;r;0.1
I created two aliases at the end of acadlt.pgp :
SF, *SFILLET
C, *COPY
When i type C, it works fine (just a test) but although it appears correctly in the Command prompt, SF doesn't work and it keeps telling me : UNKNOWN COMMAND "SF"
Last thing, if I create an icon in a toolbar with the special fillet command : it works fine...
I want to do a short movie with facial animation.
I want to animate 2 bears and 1 human.
Is there any program, to record my face(for the human) and "mix it" with the character?
Or how should I do the Face animation?
I want to change the text in my dimension. I don't actually want to change my the actual dimension, just the text. Is it possible? I want to create drawings that aren't to scale, and put in the dimensions that I want on there.
View 1 Replies View RelatedI have a problem I haven't found an answer to in any CAD documents, books of forums. I would like to create:
a) a continuous line that begins and ends with space or a shape
b) a line (of any type) that has text (i.e. shape) imbedded exactly in the middle (no matter how long a line is) or at equal intervals (e.g. each 1/3 of the line)
Is there any chance linetypes like that can be created or will I need to resort to lisp and trimming/breaking the lines once drawn?
The problem is related to cartographic symbols defined by the State Geodetic Administration.
