Loading point clouds.When you load the rcs file..I mean, you don't get a message saying it's loading. You don't get a twirling, wait for it, icon.
So then you start zooming in and out. Panning around. Clicking zoom extents.Sometimes you eventually see the point cloud appear. Sometimes you don't. I think I don't when I zoom and pan around too soon.
But I don't know when it's too soon because......NOTHING HAPPENS when you load the file.
Clients are asking for point clouds within my work and renderings now. I've been given some of their PC data files for a test. It looks like the only format you can load is RCP & RCS which appears to be the AutoDesk ReCap native format.
Is the only way to import Point Clouds into MAX to buy another software package that converts the data (amoung many other things)?
how to match up certain points. I have imported 2 point clouds and have tried to use the 'align' tool to specify three points from the source object (cloud) and three points from the destination object (cloud). When doing this, it does not properly align them. The point cloud makes it difficult to select the exact point I would like to align, since there may not be a point at that exact location, but close to it. Does AutoCAD require the points in alignment to match up perfectly or is it capable of doing a best fit?
Also, is AutoCAD capable of creating a solid 3D piece from the point cloud? I would like to take all of my points and make a smooth object.
AutoCAD 2011. C#
How to access the point positions within a Point Cloud using C#? Or is this function not provided in the managed class?
how to access the positions of every points in pointcloud(.pcg files)?
Isn't it available in ObjectARX.NET 2012?or should I write my own warpper for .NET?
I have installed SP3 for Max Design. I checked the about box and it says its SP3..The help file says you will find the point cloud command under the Create > Geometry panel. But I see nothing.
How do you get a point cloud in? Have I missed something. I can't open it directly. I can import it, I can reference it and the menu option is missing.
I can get my stylised map from Promap into Map3d 2011, and I have tried importing the point cloud data which I have as a esri ascii grid file, it is basically 3 columns of numbers:- for north, east and height.
Unfortunately when I choose to format as nez (when importing) it turns the whole lot round by 90degrees ...
I have tried importing it as enz but no joy, and also in niether case will it align with my map (have tried using coords and not using coords).
I use POINTCLOUDINDEX to convert .las file to .pcg file, then I use POINTCLOUDATTACH to add .pcg file to model space.
How can I get the 3d coordinates of points in .pcs files?
I use ObjectARX in .net.
I can't find any Entity types related to pointcloud, should I find in other namespace?
I am trying to trace part of my point cloud, which has been aligned according to a new UCS I set. Drawing on the top down view, a poly line works fine out in the black ether or the model space, however when I attempt to trace over the point cloud it shoots way off in the distance.
My node snapping is turned off of course, but this only happens when I click over a part of the point cloud, as if it was snapping to the cloud and getting confused.
When I turn snapping off completely I can click anywhere I want and I'm fine. This suggests to me that it is a snapping issue, although I was under the assumption that "Node" was the only snap setting that related to point clouds.
AutoCAD 2013 point clouds can have a 3D bounding box displayed, and you can grab the grips to edit the box, x, y and z. It's a nice feature.
Using vb.net, will I be able to programmatically move those bounding box points?
I am new to 3DS Max Design 2014.
I am using a dual Xeon machine with 32 GB Ram and a Nvidia Quadro 4000.
I have a 100 point RCP (point cloud) file loaded into my scene. I have successfully set up a camera and a target path (spline) for it to follow through the scene, but when I go to render the production it takes FOREVER to process. For example, it took it 1 hour to process 2 of 700 frames. That's way too long.
I am trying to save $5000 by using Max instead of buying Pointools (which I have used and it does render these cloud animations much faster). I am just not too sure about the gazillion settings, what thye mean, and if they are applicable to point cloud production rendering.
When i import a pointcloud into revit the scale is not right. Is there a way to fix this
View 1 Replies View Relatedhow can I get a .dwg file of point cloud, to work on the Revit?
View 1 Replies View RelatedCreate an emission and a surface for collision, create 'Spawn on Collision'. So far it works.
Create a second pointcloud with animated ICEtree and enter the pointclouds name in the 'Spawn on Collision' node. The network turns red.
Not only that, the damage can not be undone by reentering 'self' in the 'Spawn on Collision' node. After this, if one unplugs the Bounce off Surface node for example, and tries to plug it back in one gets a Context Mismatch warning.
Is this a bug?Also tried it with 2012.5 Same thing.
I have been searching for a solution to a problem i have been having. I have a point cloud, and I am wanting to TIN it to create a surface.
When I use the Create Surface tool, no dialog box appears. Everything I have found seems to rely on this Dialog Box. How to get it to display?
Using AutoCad Civil 3D 2011.
Point Cloud Index fails on Faro Scans that work in 2012???? Tools in 2013 seem better. Civil 3D and Point Cloud data.
View 4 Replies View RelatedUsing Civil 3D 2013, Faro Scene 4.8.2.25521, Kubit PointCloud Pro 8.0.4.7.
Is it possible to turn off the bounding box on a non-Civil 3D, .PCG point cloud that was indexed into Civil 3d directly from the Faro .FWS file using the "POINTCLOUDINDEX" command?
Supposedly there's a way "To Convert One or More Surfaces to Solids":
[URL]
However, I'm unable to find Home tabSolid Editing panelThicken.
I'm trying to take LIDAR/Point Cloud data and 3D print it (in the end, I need to make an STL file). I've created a 3D surface from Point Cloud data which results in a Raster Layer. I do not know how to convert the surface that's in the Raster Layer into a solid.
Is this possible? I don't want RBG color values or intensities I just want to change the default pointcloud color from black to something else.
I want to invert my background color and save my eyes but when I do I lose the visibility of the point clouds which are also black...
In revit 2013 I have used the point cloud (exported from Faro Scene and imported in revit 2013) without any problems. This time (another project) I have deleted some points with Recap of the cloud after edit with faro scene. Now I have imported the *.rcs files into revit 2014 and I have some serious problems..With diffenernt zoom levels some areas of the point cloud disappear. On the picture is only one pointcloud visible. If I click on it, it dont look like one, but it is really only one. And the disappearing areas are rectangles. The same problem is on floor plans. URL...
View 2 Replies View RelatedHow can I rotate my point cloud to have the front view on the top. I want to optimize the surface creation on the lateral surface of a deck and not on the ground (top) surface. I think to rotate 90 degrees on the X or Y axis.
View 3 Replies View RelatedI was wondering if there is a way to select specific 3D points out of a point cloud (.pcg). I am new with Autocad and handling of point clouds .
I can think of various things that you might want to do, as in clean up a bit the data or even delete some areas that you are not interested with. additionally, one might want to do some calculations, so selecting points first and the running a list script to use that points can be handy as well.
I'm working with a point cloud in 2013. The color comes in when I convert to .pcg and import into Revit. But I can't get the color to display in CAD. I've heard it may be a visual style problem, or a setting in my hardware acceleration, but nothing seems to work.
View 2 Replies View RelatedI'm trying to access the style manager to allow classifying LiDAR point cloud based on elevation. I have been able to attached the point cloud and see it on the drawing. For some reason I can't see the Point Cloud Menu, which I believe should be showing up beside "Express" menu on the top toolbar.
I have AutoCAD Map 3D 2011.
I have a point cloud of an excavation surface, i want to create a surface from this points. 3d civil can do it but im not 3d civil user, is there any way to do it in autocad or in 3ds max.
View 5 Replies View RelatedCivil 3D point cloud tools (ribbon) are different than AutoCAD's. Is there a way to bring up AutoCAD's point cloud ribbon in addition to Civil 3D's ribbon?I guess if the commands are the same, I can just copy the ribbon from AutoCAD's CUI and plop it into Civil 3D's CUI.
But, is there a better way or is there something I'm missing?I'm looking for the clipping tools and the point cloud display otions (scan colors, elevation, normal, intensity, etc.)
How can I fix my PS creative cloud? I am getting the following error message: "Photoshop.exe - Entry Point Not Found".
View 1 Replies View RelatedI have 3d scan of aircraft door frame (see attach) in point cloud format. I'd like to overlap 5 different frames and construct a new 6th frame by averaging out all of the points.
At the moment, the 3d data files has no surface and I'm unsure if adding surface with the construction of the 6th frame. I will also need to take into consider alignment, point density, and orientation when overlapping all of the frames before I can start work to average all points (Note: each scan are taken from 5 different vehicle).
I have both Rhino3D and Autodesk Alias Design 2012. What are the logical steps to do in this case?
Is there a way to plot a color point cloud (PCG) in color in a viewport in paperspace? I can't seem to figure it out if there is.
View 2 Replies View RelatedI am working with a Lidar dataset that is over 34 million points. It covers an area far larger than I need for our project. I have experimented with point clouds and am able to process and generate a surface from the data by applying a clip boundary to the surface. The problem with this is the surface only has about 540k points out the total dataset and it appears that the points have been greatly reduced in density. I am thinking this is due to the way C3D limits large data sets to display only 1.5 million points and thus my surface data is highly filtered since it is extracted from a small area of the dataset. I have tried setting point cloud display to 100%.
can I somehow filter my point cloud so that I can reduce the area of coverage and thus increase the density that is extracted into my surface?
while i am trying to load my point cloud files the points appeared in the model but not all points
i entered to the setting of the point cloud from the toolspace toolbar , i found that there are about 32 million points but only 700000 points are displayed in the drawing. Is there a way to display all the loaded points in my drawing to show all the points since i need to render a high resolution pictures for my lots.