VideoStudio :: Poor Quality Result From Editing HD Video

Nov 8, 2012

I am trying to produce a DVD for private use only from a recording of a free-to-air TV one-off program. The program was recorded by my PVR set-top box that we use to convert the digital (HD, I *think*!) signal for our old analog TVs.

After quite a lot of work - due more to my lack of expertise than anyhting else - I have a VideoStudio project that seems to play quite nicely on the PC.

However, when I burn a DVD, the result is very jerky and flickery - to me, it seems as if the frame speed is too slow.

On one attempt, I noticed that the final .VOB file was only about 2GB - 51 minutes of video - and I decided to try increasing the video bitrate (I think that's what it was). The new .VOB file was a little over 4GB, so I expected the quality to be better.

Not so! In fact (without being able to play the two DVDs at the same time) I think it might be even worse at the higher bitrate.

View 4 Replies


ADVERTISEMENT

Premiere Pro :: Poor Video Quality When Editing

Dec 8, 2013

I have the following equipment:
Canon HDV XH-A1S
 
When capturing HDV clip with Premier Pro CC and playing it in the timeline, the video plays very choppy (bounces) and vertical lines flicker (drapes, edges if doors, etc...). It also seems like it is playing too fast (?). I play the exact same captured clip in Windows Media Player, and it look great.
 
My Canon was set at HDV 60i
 
clip properties:
Type: MPEG Movie
File Size: 1.1 GB
Image Size: 1440 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;06;04;06
Pixel Aspect Ratio: 1.3333

View 19 Replies View Related

VideoStudio :: Unexpectedly Poor Video Quality

Sep 25, 2012

Brand new to VideoStudio or any other video editing software.

I used VideoStudio X5's screen capture feature to create a couple of training videos for our church. When viewed on their own, the videos look excellent - the screen captures are sharp and clear. But when I use those same captures in a video project - with an opening title and a couple of transitions - the capture videos are grainy, the text of the Web pages included in them almost unreadable.

As I said, I am new to this stuff, so the explanation for what I'm experiencing is possibly quite simple. Nonetheless, why the capture videos look great when I view them on their own, but become blurry when they are part of a project?

View 11 Replies View Related

Photoshop :: Poor Quality Video After Rendering In CS6?

May 20, 2013

I've recently updated to cs6 and was looking forward to the video editing aspect. Very familiar with iMovie, and don't like the somewhat limited adjustments. Unfortunately, when I rendered my first video in CS6, the quality was horrible.

View 10 Replies View Related

Photoshop :: Why Do Video Transitions Have Poor Quality On Playback

Oct 26, 2013

I've created a slide show using layers and have created a video group. This turns the layers into clips in the timeline. I've added a cross-fade transition between each clip in the timeline.
 
Everything plays back nicely in PS. When I export to mp4 and play it back in Quicktime, no matter what the magnification, the transitions look horrible. Even if I freeze frame on one it's horribly pixelated. I've tried different export options with the same results. Something appears to be happening during rendering the transitions, as if PS doesn't know how to create them. I export to:
 
Adobe Media Encoder
H.264
High Quality
1920 x 1080 (same as my file)
Frame Rate 30 fps
Field Order: Preset (Progressive)
Range = All Frames
 
My stats are:
PS CS6
iMac 27"
10.6.8
800 gigs free space
12 gigs ram 8 free

View 2 Replies View Related

Premiere Pro :: Export Media - Video Quality Is Poor?

Apr 8, 2014

Using a Macbook Pro, 2.6 GHz i7 8MB RAM
 
1) Importing 1920 x 1440 GoPro footage, .mp4, 29.97 fps : What sequence settings do I need for this media? I can't find any presets that match it. So I just pick a 1440 x 1080 sequence. What should I be doing?
 
2) Exporting Media quality is very poor and pixelated. I am just importing a video into a sequence and exporting about 10 seconds at a time with different export settings: H.264/Match Source, Quicktime, H.264-Blu ray with different presets. And I'm checking "USe max render quality". Every time it renders very pixelated.

View 1 Replies View Related

VideoStudio :: Poor Quality VOB Files

Aug 1, 2012

I created a video in Video Studio Pro 5. I published to a MPEG4 file to play back and check my results. The file opened with Quicktime and the video looked fine. So I went ahead and burned the video to a DVD using the Share feature, where it created a VOB file. When the VOB file opens in Windows Media Player, it loses resolution. The worst parts of the fuzzy video are the MPEG4 files that I imported into video studio. They are 1080 HD files so I thought they should look ok and, in fact, they look fine in Quicktime. But I also imported JPG's and they look fuzzy as well. How can I burn to a DVD without losing resolution?

View 11 Replies View Related

VideoStudio :: X3 - Poor Quality On DVD Playback?

Mar 23, 2011

Using Corel VideoStudio Pro X3 and either Corel DVD Moviefactory 7SE or Corel DVDFactory Pro 2010, the playback quality of the burned disks is poor. While the completed project has excellent quality both direct from the hard drive AND when using Windows Explorer and just copying directly to the DVD, anytime I attempt to create a simple menu structure, it seems that the entire video is re-rendered causing a significant loss in video quality from the original. I have tried all settings in both packages even just including the created 660MB mpeg4 (rather than the project itself) in Pro 2010 and the result is a 220MB file. Again, when I just use Windows Explorer and copy directly the DVD, the original video is preserved including the 660MB file size and the quality is the same as the project.

View 9 Replies View Related

VideoStudio :: Pro X4 - Photo Quality Poor

Jun 15, 2013

I am using the pro x4. My photos are of poor quality on my completed DVD. this has not always been the case. my photos are high resolution taken with a Nikon d5000. there was a recent update and I am not sure if it required some setting changes.

View 4 Replies View Related

VideoStudio :: Poor Quality DVD From HD Sources?

Oct 17, 2013

I'm using the 30 day trial of VisualStudio x6 to create a DVD from multiple different video sources (MOV, MP4, MPG, WMV etc) that are all recorded in HD or near HD qulity. The total size of all these videos on my HDD is upwards of 7Gb. My problem is, when I burn the DVD it compresses down to just over 950Mb and the quality is noticably degraded.

I realize there will be some quality loss going from source to DVD but is there anything I can change in the settings to achieve the highest quality DVD output? It seems like from 7Gb to 950Mb, its not even trying to maintain any quality. Not even half the single layer DVD disc gets filled. I also have DL DVD's to burn to. Basically, I want the highest quality DVD from these HD sources regardless of final output size.

View 8 Replies View Related

VideoStudio :: Audio Quality Poor In MPEG4 With X4?

Jan 10, 2012

I've rendered my project to MPEG4 and the audio has a light popping intermittently through it. I thought it might be caused by having multiple video overlays but only one track had audio enabled. I've now split out the audio and put it into it's own track but I'm still getting the poor quality sound.

View 12 Replies View Related

VideoStudio :: Very Poor Rendering Quality For HD Files In X4?

Mar 1, 2012

I am getting very poor rendering quality for HD files. If the clip is “untouched” by VS it will render fine. However any changes to the clip either by adding transition, modifying brightness, color, adding title overlay etc. causes significant lost of quality and creates very flickery output with jerky movements.

Original clip

[URL]

Same clip but rendered by VS X4

[URL]

Here are the steps to do the test:

1.Download files from provided links:

a)Original clip : [URL]

b)Project file : [URL]

c)Project screen shot: [URL]

2.Create folder in your C dirve called “Test” and place downloaded files in it.

3.Open provided project file in VS X4. This should have the original clip placed on the time line twice. The first one is not modified clip and the second one has modified brightness just to force the rendering)

4.Render it to the file using MPG Optimizer. (i.e. Share -> File -> MPG Optimizer -> Accept -> Save) This should produce AVCHD 1920 x1080 60i file. See the project screen shot “Test.jpg” as a reference.

5.Play both source and rendered files in Windows Media player or TV and compare the smoothness of movements. R

View 14 Replies View Related

VideoStudio :: Poor Quality In Panoramic Photos

Dec 22, 2010

My still camera facilitates the taking of multiple panoramic shots than can be later stitched into one large file - a narrow, long image (about 5 Mb in my case). I can access this photo as with any other photo. However, if I zoom into it with the intent of panning from left to right so the full height of the image fills the screen, the quality goes way down. It is not the photo file itself because I can bring that up in the Windows photo gallery and it zooms up wonderfully. Also, if I zoom any regular photo to the same extent (about 400x) that image remains pretty good and does not have the same drop off in quality. I looked at all of the options I could find, but saw nothing I could do to improve the quality.

How to pan manually from one photo to another, instead of using the panoramic pic? I tried this using the overlay track but of course the overlay photo covers up the main track.

View 7 Replies View Related

Photoshop :: Video Editing / Exporting In CS6 - Original Quality Gone In YouTube

Mar 12, 2013

I record video tutorials about Photoshop (so, screen captures) and edit/combine the clips inside Photoshop CS6 in Win 7/64; Photoshop's new video talent is nice. I record 852x480px at 15 fps with FastStone Capture  and save in WMV. I want to show the finished video tutorial on Youtube. There are several things baffling me when editing video in Photoshop CS6.
 
My original records  (according to MediaInfo):
Software: FastStone Capture
Overall bit rate mode : Variable
[code]....

The result looks very nice when i play it locally in VLC. It looks like the original WMV. But: When i upload the Photoshop-version to YouTube, the video looks very badly "upsampled" and blurred. It looks much worse than the uploaded WMV original. If you like, you can compare the two videos from the same source online:
 
Uploaded WMV clip, looking good (set player to 480 p): URL....
 
Rendered in Photoshop CS6, looking bad (set player to 480 p): URL.....I do like the resolution of 852x480 and would like to keep it. If not possible, i have to record tutorials in 1280x720, even though icons and menus look too small. So far i have not tested it.
 
I searched my folder C:Program Files (x86)Common FilesAdobedynamiclinkmediaserver1.0. There is a lot in it which i don't understand, but some file names include "MPEG", "AVI", "Adobe QT Server" etc. I think there is no Quicktime installed on my machine; i try to avoid it as it does many different things to the system and is obnoxious.
 
My questions:

- When aiming for a YouTube cast, could i stay with 852x480 (at 15 fps), or doesn't it make sense? (I like that size.) If 852x480 is not ok, what is the lowest resolution for getting good looking presentations on Youtube?

- Why does the Adobe Media Encoder in my Photoshop CS6 only offer the formats H.264 and DPX? Can i get more? (Free, pay.)

- Do i need to install Quicktime? How could i do this with less intrusive QT behaviour?

- Should i record more fps in FastStone Capture? (I don't find more fps necessary when looking at the original and when looking at the uploaded *original*.)

View 6 Replies View Related

VideoStudio :: Low Quality Video Shares?

Dec 21, 2010

When creating video files, I'm noticing that the quality of video in the final file is much less than the original file.

The original files are wmv files. They are sharp, smooth, etc. 640X480, 1900kbps data rate, 2060 kpbs total bit rate, 30 frames/second frame rate.

When I try to create a video file with identical or greater specifications, I get low quality (fuzzy, choppy, etc.).

I've tried them all: custom, dvd mpg, Wmv, Blue Ray, etc.

The one option I can't try (because it's grayed out for some reason) is the "Same as First Video Clip" option. Not sure why I can't.

I've tried it on my Video Studio 11 plus and a trial version of video Studio X3 - same results.

View 4 Replies View Related

VideoStudio :: Maintaining Video Quality In X4?

Sep 10, 2012

I burned a DVD of some .MOV clips, and the quality of the video on the DVD is noticeably worse than the original files. The size of the original files is 2.9 GB, but they are shrunk down to just 2.01 GB on the DVD. The bitrate is also significantly lower.

View 9 Replies View Related

VideoStudio :: HD Video - Output Quality

Apr 17, 2011

I have been trying Video Studio a few times in the past. The first version I ever tried must have been Ulead Video Studio 7 or 8. I always liked the process oriented GUI and the goodies that are made so easy compared to other video editing software. I remember version 8 and next to be very unstable though, which is why I kept working with other software like Pinnacle. Each time there was a new version though I tried it and I have seen stability improving with every version. I would like to work with Video Studio a lot, however I have serious problems with output quality.

Since a few years I am filming HD video, AVCHD standard (1080i50) with a Panasonic HDC-SD5 and recently HDC-SD900. The last one, a new camera, offers incredible detail and quality. Of course I want to see the same quality in my end product, the output of the video editing software. Here is where I have a big problem.

1. When I save output as AVCHD an use smart rendering there are problems with the transition between two clips. There are blocks all over the place. I have tested this with X2, X3 and X4. I remember in X2 there seemed to be some frames in the wrong order at the end of each clip. In X3 there were blocks. In X4, which I am testing now, sometimes output is good, sometimes there are blocks worse than I ever saw in X3.

2. When I save as AVCHD, Bluray, H.264, ... no matter what format in 1080i without smart rendering there is a big quality loss. It is really visible, especially on the pc screen. I have tried many settings: bluray 2-pass encoding at 30.000bps, AVCHD and H.264 at 18.000bps. It seems to be impossible to get good quality out.

No matter what I did, I cannot even approach the input quality with Video Studio. And let's face it, it all comes down to the output!

I have tried encoding with some other free tools such as Handbrake and Staxrip. Of course these are not video editors, but at least I could compare the output quality.

View 3 Replies View Related

VideoStudio :: Video Quality Settings

Oct 20, 2012

I transferred some VHS tapes to DVD in VS 10+. They looked very good on my older 26" TV. We recently purchased a 42" flat screen HD and a Bluray DVD player that up converts DVD to near HD. When I played my DVDs that I converted from VHS the video quality is decreased. I burned the VHS tapes to DVD format, 29.97 rate, 7000 bitrate constant 720x480. What is the better format to transfer VHS to DVD?

View 4 Replies View Related

VideoStudio :: Maximizing Video Quality

Jan 24, 2012

I am trying to burn VSP projects on Blu-ray discs with the highest quality video possible using VSPx4. I am using video clips from an HD camcorder with frame size 1920 x 1080 and 59.94 fps but when I try to modify the project settings I am unable to change frame size higher than 720 x 480 or 29.97 fps and I'm not sure why. However, after I click share and click to burn a Blu-ray I can open the settings in the new window and change the frame size to 1920 x 1080 but I still cannot increase the speed to 59.94 fps. My first question is do I need to change my project settings while working on the project or is it enough to change the settings after I click to burn the Blu-ray and the second question is can the fps be increased to 59.94?

View 7 Replies View Related

VideoStudio :: X5 - Crop Video Without Losing Quality?

Sep 5, 2012

I bought VSX5 Ultimate last week to go with my new GoPro Hero2, climbed the learning curve, and can now produce presentable videos. I've read the (not very complete) VS User Guide, checked Corel's Knowledgebase, spent the better part of thirty hours twiddling filters (rendering to a 1280x720 output file and viewing that outside of VS) and spent about eight hours searching this forum and the Interweb for the answer to no avail, so here I am:

I have 1920x1080 30p MP4 video from the camera, but want to crop it to 1280x720, and not lose image quality. Can VSX5 do this, and/or how?

I'm new to video, but very old to photography. When I say "crop" I mean "throw away the area outside of my cropping rectangle, resulting in an image of smaller dimensions."

I do not mean "fill the area outside my cropping rectangle with the color of my choice, resulting in an image of the same dimensions" as happens when using the Crop Borders filter.

Video Pan & Zoom doesn't work as the final results are abominable; as soon as I specify 150% zoom (amount needed to make a 1280x720 area fill a 1920x1080 area) quality is lost. The Cropping filter produces the same (lost) quality results. Distort Clip does the best job but still suffers some image quality degradation, and it's nearly impossible to get a precise "150%" crop (or "33% reduction" as my Photoshop brain thinks) as dragging the handles is all by eyeball. I think the problem is that all of these options entail two steps: (1) Enlarging the area I want to keep, causing it to fill the frame -- AND losing quality in the interpolation process. (2) Saving the entire frame (clip), now filled with lower-quality "larger pixels" so to speak, at a smaller size than original.

My Project Properties are NTSC drop frame (29.97fps), AVI, 24bits, 1920x1080, 29.97fps, Frame-based, Uncompressed, PCM, 48kHz, 16bit stereo.

My Movie Template that I'm using is MPEG-4, 24 bits, 1280x720, 29.97fps, Frame-based, H.264 High Profile Video: 12500 Kbps, 48000Hz, 16bit, Stereo, MPEG AAC Audio: 128Kbps.

Am I trying to do something that can't be done? Am I overcomplicating something? Am I missing the "photographic crop" filter?

View 3 Replies View Related

VideoStudio :: Creating The Best Quality Video File

Dec 14, 2010

So, I have created many bluray video files which I store in my hard drive using the Corel pro "create a videofile feature" and they have worked pretty good, but I have found that burning the same bluray video onto a disc using Corel DVD factory has a superior picture quality, specially when you look at strong colors like red, they don't smear and have a rock solid look to it, I have also found that when the camera pans this problem shows its ugly face even more when creating a video file to the hard drive, but not in the burning disc process. I always choose two pass encode and the highest quality setting when burning a bluray disc.

Question, Is there a way to choose "two pass encode" in the Corel pro program or a way to change settings so that I get rid of the problem, or Can I use the Corel dvd factory in a way that I don't have to burn a disc, but just create a video file?

View 5 Replies View Related

VideoStudio :: Video Quality When Inserting Instant Project?

Nov 12, 2011

I downloaded the trial version of pro 4x and love the video clarity and smoothness....even running at 60FPS. However, when I try to start editing with the "Instant Project", I start to have issue.

1. The intro is fine.....very smooth

2. However, when it gets to the video portion, the quality and "shuddering" of the vidoe is horrible.

View 2 Replies View Related

VideoStudio :: Why Does Frame Rate And Video Quality Decrease

Dec 19, 2010

I shot some clips on my sony cyber shot camera (its about 2 years old so the content is not in HD). the clips are in .mpg format

i'm using the trial version for corel videopro x3 -. when i try to trim the clip, the output is not as good as the original clip. Why would this be ?

i selected the "same as project settings" option when creating the file. is there some other option i should choose ?

or is this because i'm using a trial version ?

i used to edit my clips in windows movie maker and it irrespective of whatever editing i would do, the clip quality would be exactly the same as that of the source clip.

View 1 Replies View Related

VideoStudio :: Color Corrections Decreasing Video Quality

Apr 15, 2013

I made a time lapse video which I then saved as a .VSP file. Then i open a new project and import the VSP file as a video. Then I made some color corrections including an extra point or two of saturation, contrast and brightness. After exporting the video as a 1920x1080 WMV or MP4, i notice a significant reduction in quality compared to the ones where i did not make color corrections. The video appears blurrier like it was exported at a lower resolution. Modifying any of the sliders appears to trigger the effect. I duplicated the problem with a time lapse project consisting of just 5 pictures so there is nothing else in the project. No animations, titles or anything.

View 5 Replies View Related

VideoStudio :: Video Clips And MP3 Music File - Audio Quality?

Sep 15, 2012

When I go to render a video that is composed of video clips and an .mp3 music file, I'd like to get the finished file into as big of a file as I can. In order to do that, I select the MPEG-4 option. The good news is it typically will result in an approx file size of 250MB for a 2 1/2 minute video, versus 170MB for any other file extension. The bad news is the audio is full of pops and noise. The audio remains fine with any other option other than MPEG-4.

I've tried numerous ways to 'reconstruct' the file...using different audio file extensions (it seems to prefer .wma files but there is a noticeable drop in clarity), rendering the video only then adding the audio file and rendering again...nothing works. I've also tried to modify the rendering options in each video selection that Corel offers (this is in the window that pops up asking for the file name just before you render it), but the audio never gets better.

View 2 Replies View Related

Photoshop :: Poor Animation Quality

Feb 5, 2005

animations after being saved in Imageready result in poorer qulity than usual even though it's set to 256 colors. The settings in my optomize pallet are gif, lossy:0, custom, colors:256, diffusion, dither:100%. Usually the default settings are jpeg high but I can't save as a gif with those settings where I'm sure I could before today.

View 1 Replies View Related

Photoshop :: Correction Of Poor Quality?

Jul 14, 2004

correction of poor quality?

View 5 Replies View Related

Lightroom :: Poor Quality Watermarks From LR3?

Jul 6, 2010

I'm working on a project where I need to export hundreds of custom images for use on a website. Each image needs to have a watermark on it. So I created the watermark in Illustrator, then placed it into a 900 pixel x 900 pixel file and saved for web as a PNG-24 with transparency.
 
When I export images form LR3 using the above graphic as a watermark the image quality is great, but the watermark has rough edges and is pixelated at any setting under 2500 pixels. I need to output down as small as 150, 225 and 250 pixels. I can do this in photoshop and the watermark looks great. Yet from LR the quality is noticably bad. See the attached file.

how to improve the quality of the watermark?

View 13 Replies View Related

After Effects :: Poor Quality In Placeholder

Mar 18, 2013

I've just recently starting using After Effects and it's very impressive.I purchased a project file from videohive.com, it's a few seconeds long and is basically a logo reveal.I opened up the placeholder where the logo is meant to sit, and I imported a vector version of our logo and added the text.
 
The problem is, everything within the placeholder seems to be of very poor quality before and after the video is rendered. URL....
 
Is there something I am doing wrong here? The "values and achievement" text is of high quality with no blurring or pixelation, the same goes for the blue surrounding effects, but anything within "logo" (as it is called on the timeline), is very poor as you can see from the video.

View 2 Replies View Related

VideoStudio :: Window Bigger Than Screen - Adding Text To Low Quality Video

Jul 18, 2013

I'm using Corel videostudio X6 and I have 2 problems.

1. when i go in to track/customize motion mode, the window is bigger than the screen so i can't use this option (i'm using lap top wide screen). like in here: [URL] ....

2. when i'm adding a text to low quality video the text doesn't look well and i wonder how can i maintain the quality of the text?

View 1 Replies View Related

VideoStudio :: Editing 3D Video In X5 (SP2)?

Mar 28, 2013

Can it actually be done? If I so much as drop 3D file onto the timeline and tag it as 3D (SBS L-R in my case), I get the "... lost 3D attributes..." message when I try to create a 3D file. I tried tagging a 2D file as 3D for S&Gs and got the same result. In case it matters, the files are in .avi format (and even rendering a 2D version of these makes a jumpy video, but I digress...).

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved